The Proskit MT-7063 PoE & LAN Cable Tester is a versatile and essential tool designed for testing Ethernet cables (LAN) as well as Power over Ethernet (PoE) cables. This tool is invaluable for network professionals, electricians, and technicians who need to verify the performance and integrity of Ethernet cables, especially in environments where PoE technology is used to supply power to devices over a single Ethernet cable. Key Features: PoE (Power over Ethernet) Testing: The MT-7063 can test Power over Ethernet (PoE) cables to determine whether PoE power is being transmitted through the cable. This is crucial for verifying installations of devices that rely on PoE, such as IP cameras, VoIP phones, wireless access points, and other network devices that require both power and data through the same cable. The tester can detect whether PoE voltage is present, allowing users to verify that the cables are correctly providing power to connected devices. LAN Cable Testing: The tester is designed to test standard Ethernet cables (including Cat 5, Cat 5e, Cat 6, and Cat 6a), ensuring proper wiring and functionality. It checks whether the cables are wired correctly according to the T568A or T568B wiring standards. This is important for ensuring that network cables are wired in the correct sequence for optimal data transmission. Wiremap (Wiring Integrity): The MT-7063 is equipped with the ability to check the wiremap of the Ethernet cable. This includes verifying that all wires are properly connected, in the correct order, and ensuring there are no open circuits or short circuits. If any wiring issues are found, the tester will indicate the specific problem using LED lights. LED Indicators: The tester uses LED lights to show the status of each individual wire within the Ethernet cable. If the cable is wired correctly, green LEDs light up for each corresponding wire. If there is a problem (e.g., miswiring, open circuit, or short circuit), the relevant LED will light red or will be inactive, alerting the user to the specific issue. Short Circuit and Open Circuit Detection: The MT-7063 detects both short circuits and open circuits in Ethernet cables. A short circuit happens when two wires are mistakenly connected, while an open circuit occurs when a wire is not connected at all. Identifying these issues is crucial for ensuring that the cable will function properly in a network. Remote Unit for Long Cable Testing: The tester includes a remote unit, allowing for testing of long cables without having to have both ends near the main tester. This is particularly useful when testing cables that are already installed or are difficult to access fully. The remote unit is often designed for easy plug-in and quick testing. Clear LCD Display: The tester features a clear LCD display that provides visual feedback on whether the Ethernet cable is wired correctly and whether PoE power is detected. This display helps users interpret test results quickly and accurately. Compact and Portable Design: The Proskit MT-7063 is compact and lightweight, making it portable and easy to carry around for fieldwork. Its small size ensures that it can easily fit into a toolbag or be carried around on-site for easy access and use. Battery-Powered: The tester is powered by standard batteries, which ensures portability and ease of use in locations without access to an external power source. Its low power consumption helps extend battery life, making it ideal for frequent testing. Durability: Built with durability in mind, the MT-7063 is designed to withstand regular use in rugged environments, providing reliability for technicians who work in different locations or on different types of network setups. Easy to Use: The Proskit MT-7063 is designed to be simple to operate. You just need to plug one end of the Ethernet cable into the tester and the other end into the remote unit (if applicable). The tester will quickly display the results on the screen or via LED indicators. Applications: PoE Verification: Ideal for checking whether Power over Ethernet (PoE) is being properly supplied through Ethernet cables to power devices like IP cameras, wireless access points, and phones. Cable Troubleshooting: Useful for identifying wiring issues in Ethernet cables, such as miswiring, open circuits, shorts, or incorrect configurations. Network Installations: Perfect for verifying the integrity of Ethernet cables during the installation of networking equipment and ensuring that the wiring standards (T568A/B) are followed. IT Professionals: A must-have for IT technicians who are involved in the setup, maintenance, and troubleshooting of network systems. Home and Office Networking: Great for testing Ethernet and PoE cables in small-to-medium office or home network installations. Field Testing: Compact and easy to carry, it is an ideal tool for field technicians who need to perform quick tests on network cables during installations or maintenance. Summary: The Proskit MT-7063 PoE & LAN Cable Tester is a highly functional, easy-to-use tool designed for testing Ethernet cables and Power over Ethernet (PoE) cables. With its PoE detection, wiremap checking, short and open circuit detection, and clear LCD display, this tester provides reliable performance for professionals working with network cables. Its compact size, remote testing functionality, and LED indicators make it a versatile tool for field use and quick diagnostics in a wide range of network-related tasks. Whether you are installing, maintaining, or troubleshooting Ethernet and PoE cables, the MT-7063 offers the features necessary to ensure your network is performing optimally. You said: Proskit MT-7029 Noise-Filtering NetworkPoE Toner & Probe ChatGPT said: ChatGPT The Proskit MT-7029 Noise-Filtering Network PoE Toner & Probe is a specialized tool designed for testing and troubleshooting network cables, including those used for Power over Ethernet (PoE) systems. This toner and probe kit is an essential tool for network professionals, electricians, and IT technicians, especially when dealing with cable identification and PoE-enabled devices in complex network environments. Key Features: Noise-Filtering Capability: One of the standout features of the Proskit MT-7029 is its noise-filtering functionality. This allows the toner and probe to detect and trace network cables even in environments with high levels of electrical noise or interference. It ensures that the signals being transmitted by the toner are clear and precise, making it easier to identify cables and troubleshoot network issues. PoE Detection: The MT-7029 is specifically designed to work with Power over Ethernet (PoE) cables. It can detect whether PoE voltage is present on the cable, allowing users to confirm that both power and data are being transmitted through a single Ethernet cable. This is particularly important for installations involving PoE-powered devices like IP cameras, VoIP phones, and wireless access points. By verifying the presence of PoE power, users can quickly determine whether a cable is capable of powering devices in addition to transmitting data. Toner and Probe Design: The toner is the active part of the tool that sends a signal through the network cable, allowing the user to trace its path. The probe detects the signal emitted by the toner and produces an audible tone, allowing the technician to locate the cable without needing to access both ends of the wire. The signal strength and clarity of the tone help guide the user to the correct cable, ensuring efficient and accurate cable identification. Cable Tracing: This tool is ideal for cable tracing, allowing technicians to trace cables even when they are bundled together or hidden behind walls, ceilings, or other obstacles. The noise-filtering ability ensures that the signal can be detected and traced clearly, without interference from other nearby cables or electrical systems. Clear Audio Tone: The probe produces a clear, audible tone that indicates the presence of the toner’s signal in the cable. The volume of the tone can often be adjusted, making it easier to identify the cable's location even in noisy environments. A louder tone indicates that the probe is closer to the signal source, helping users pinpoint the cable. Multiple Applications: Cable Identification: The MT-7029 can be used to identify the specific path of individual cables in a network setup, making it useful for labeling or troubleshooting. PoE Troubleshooting: It helps verify that cables in PoE installations are delivering the proper power and are correctly wired, ensuring that PoE-powered devices will function properly. Network Maintenance: The tool is helpful for network administrators and technicians who need to troubleshoot or modify network wiring, whether in commercial or residential settings. Field Use: Due to its portability and easy-to-use design, the MT-7029 is a perfect tool for field technicians working in different locations, especially for large network installations where finding and diagnosing cable problems can be time-consuming. Adjustable Sensitivity: The probe comes with adjustable sensitivity settings, allowing users to fine-tune the device for more precise cable identification. This is particularly useful in large installations or dense cable environments, where other cables might interfere with the signal. Ergonomic Design: Both the toner and probe are designed for ergonomics, making them easy to handle and use for extended periods. The user-friendly interface and design ensure minimal fatigue during use, which is especially important during long troubleshooting sessions. Durable Construction: The MT-7029 is built to withstand the rigors of daily use in professional settings. Its durable casing protects the internal electronics from damage, ensuring a long service life even under tough working conditions. Battery-Powered: The toner and probe are powered by standard batteries, ensuring portability and easy use in locations where external power sources may not be readily available. Applications: PoE Network Installations: Ideal for testing and troubleshooting PoE cables, ensuring that both power and data are transmitted properly to connected devices. Cable Tracing in Complex Installations: Useful for tracing and identifying network cables in environments where multiple cables are bundled together, in cabinets, or behind walls. Network Troubleshooting: Essential for identifying faulty cables, determining the correct path for cable connections, and verifying proper PoE power delivery in network setups. Field Work: Compact and portable, this tool is an excellent choice for field technicians working in various locations to diagnose and resolve network cable issues. Infrastructure Maintenance: Perfect for technicians maintaining or upgrading network infrastructures in commercial and residential buildings, helping them identify the correct cables without making unnecessary disconnections. Summary: The Proskit MT-7029 Noise-Filtering Network PoE Toner & Probe is a highly effective tool designed for cable tracing and PoE testing. With its noise-filtering capabilities, PoE voltage detection, and adjustable sensitivity, it provides accurate and clear results for network professionals working with Ethernet and PoE systems. The ergonomic design, battery-powered convenience, and clear audio signals make it a reliable choice for field technicians and IT professionals looking to troubleshoot, identify, and verify network cables in diverse environments. Whether for PoE verification, cable tracing, or network maintenance, the Proskit MT-7029 is an essential tool for ensuring the functionality and integrity of network installations.

The Proskit MT-7063 PoE & LAN Cable Tester is a versatile and essential tool designed for testing Ethernet cables (LAN) as well as Power over Ethernet (PoE) cables. This tool is invaluable for network professionals, electricians, and technicians who need to verify the performance and integrity of Ethernet cables, especially in environments where PoE technology is used to supply power to devices over a single Ethernet cable. Key Features: PoE (Power over Ethernet) Testing: The MT-7063 can test Power over Ethernet (PoE) cables to determine whether PoE power is being transmitted through the cable. This is crucial for verifying installations of devices that rely on PoE, such as IP cameras, VoIP phones, wireless access points, and other network devices that require both power and data through the same cable. The tester can detect whether PoE voltage is present, allowing users to verify that the cables are correctly providing power to connected devices. LAN Cable Testing: The tester is designed to test standard Ethernet cables (including Cat 5, Cat 5e, Cat 6, and Cat 6a), ensuring proper wiring and functionality. It checks whether the cables are wired correctly according to the T568A or T568B wiring standards. This is important for ensuring that network cables are wired in the correct sequence for optimal data transmission. Wiremap (Wiring Integrity): The MT-7063 is equipped with the ability to check the wiremap of the Ethernet cable. This includes verifying that all wires are properly connected, in the correct order, and ensuring there are no open circuits or short circuits. If any wiring issues are found, the tester will indicate the specific problem using LED lights. LED Indicators: The tester uses LED lights to show the status of each individual wire within the Ethernet cable. If the cable is wired correctly, green LEDs light up for each corresponding wire. If there is a problem (e.g., miswiring, open circuit, or short circuit), the relevant LED will light red or will be inactive, alerting the user to the specific issue. Short Circuit and Open Circuit Detection: The MT-7063 detects both short circuits and open circuits in Ethernet cables. A short circuit happens when two wires are mistakenly connected, while an open circuit occurs when a wire is not connected at all. Identifying these issues is crucial for ensuring that the cable will function properly in a network. Remote Unit for Long Cable Testing: The tester includes a remote unit, allowing for testing of long cables without having to have both ends near the main tester. This is particularly useful when testing cables that are already installed or are difficult to access fully. The remote unit is often designed for easy plug-in and quick testing. Clear LCD Display: The tester features a clear LCD display that provides visual feedback on whether the Ethernet cable is wired correctly and whether PoE power is detected. This display helps users interpret test results quickly and accurately. Compact and Portable Design: The Proskit MT-7063 is compact and lightweight, making it portable and easy to carry around for fieldwork. Its small size ensures that it can easily fit into a toolbag or be carried around on-site for easy access and use. Battery-Powered: The tester is powered by standard batteries, which ensures portability and ease of use in locations without access to an external power source. Its low power consumption helps extend battery life, making it ideal for frequent testing. Durability: Built with durability in mind, the MT-7063 is designed to withstand regular use in rugged environments, providing reliability for technicians who work in different locations or on different types of network setups. Easy to Use: The Proskit MT-7063 is designed to be simple to operate. You just need to plug one end of the Ethernet cable into the tester and the other end into the remote unit (if applicable). The tester will quickly display the results on the screen or via LED indicators. Applications: PoE Verification: Ideal for checking whether Power over Ethernet (PoE) is being properly supplied through Ethernet cables to power devices like IP cameras, wireless access points, and phones. Cable Troubleshooting: Useful for identifying wiring issues in Ethernet cables, such as miswiring, open circuits, shorts, or incorrect configurations. Network Installations: Perfect for verifying the integrity of Ethernet cables during the installation of networking equipment and ensuring that the wiring standards (T568A/B) are followed. IT Professionals: A must-have for IT technicians who are involved in the setup, maintenance, and troubleshooting of network systems. Home and Office Networking: Great for testing Ethernet and PoE cables in small-to-medium office or home network installations. Field Testing: Compact and easy to carry, it is an ideal tool for field technicians who need to perform quick tests on network cables during installations or maintenance. Summary: The Proskit MT-7063 PoE & LAN Cable Tester is a highly functional, easy-to-use tool designed for testing Ethernet cables and Power over Ethernet (PoE) cables. With its PoE detection, wiremap checking, short and open circuit detection, and clear LCD display, this tester provides reliable performance for professionals working with network cables. Its compact size, remote testing functionality, and LED indicators make it a versatile tool for field use and quick diagnostics in a wide range of network-related tasks. Whether you are installing, maintaining, or troubleshooting Ethernet and PoE cables, the MT-7063 offers the features necessary to ensure your network is performing optimally.

The Proskit MT-7031 Mini LAN Cable Tester is a compact, portable device designed to quickly and accurately test Ethernet cables (LAN cables) to ensure they are wired correctly and functioning properly. This tool is essential for anyone working with network setups, such as IT professionals, electricians, or technicians. It allows users to verify cable integrity, check wiring configurations, and troubleshoot connection issues in a variety of networking environments. Key Features: Compact and Portable Design: The Proskit MT-7031 is designed to be small and lightweight, making it highly portable and easy to carry around for on-the-go testing. It’s ideal for use in tight spaces or when conducting fieldwork, ensuring ease of transport in toolkits or pockets. Ethernet Cable Testing: The MT-7031 is specifically designed to test Ethernet cables, including Cat 5, Cat 5e, Cat 6, and other similar LAN cables. It ensures the cable is wired according to the correct standard, such as T568A or T568B, and can detect common wiring issues. Testing for Correct Wiring: The device checks the wiring sequence of the cable to ensure that all wires are correctly connected. This helps identify if there are issues with the wiring, such as incorrect pinouts or open circuits, which could lead to network connection problems. The tester indicates whether the cable is properly wired for straight-through or crossover configuration. LED Indicators: The tester features LED indicators that visually display the wiring status of each individual wire inside the Ethernet cable. The lights show whether the cable is properly wired, helping users to quickly diagnose problems. Green lights usually indicate correct wiring. Red lights or no lights may indicate miswiring or open connections, signaling where the issue lies. Short Circuit and Open Circuit Detection: The Proskit MT-7031 can detect short circuits and open circuits within the cable, which is vital for ensuring a reliable network connection. If any wire is not connected or is incorrectly wired, the tester will indicate the specific problem. Simple and Easy to Use: The tester is straightforward to use, requiring no special knowledge or complex settings. Simply plug one end of the LAN cable into the main tester and the other end into the remote unit (which may be a detachable unit in some models). The tester will then provide instant feedback on the status of the cable. Remote Unit (Optional): In some versions of the MT-7031, the tester may include a remote unit that allows you to test cables without needing both ends to be near the main tester. This is useful when testing long cables or in large installations where the two ends of the cable are far apart. Battery-Powered: The Proskit MT-7031 operates on standard battery power, ensuring portability and ease of use in locations where a power source may not be readily available. It’s designed to conserve power, extending battery life during testing. Wide Application: This tester is ideal for a variety of environments, including: Network Installations: Ensuring proper wiring of Ethernet cables in network infrastructure. Home and Office Networking: Verifying LAN cables for proper connection in homes, offices, or small businesses. Troubleshooting: Helping network administrators and technicians quickly diagnose and repair faulty cables. IT Support: Ensuring that cables are correctly wired during computer or equipment setup. Durable Construction: The tester is built with durability in mind, designed to withstand the wear and tear of regular use in professional environments. The small yet sturdy casing protects the internal components from damage during transport or in rugged conditions. Applications: Network Testing: Ideal for verifying the functionality of LAN cables before installation or during troubleshooting. Installation: Useful for testing and certifying new Ethernet cables during network setup or maintenance. Field Use: A compact, portable solution for IT professionals, allowing them to test cables in various settings, such as data centers, offices, or homes. Cable Diagnostics: Quickly diagnosing issues with existing cables, such as miswiring, shorts, or open circuits, saving time in repairs. Summary: The Proskit MT-7031 Mini LAN Cable Tester is a compact, reliable, and easy-to-use tool designed to test Ethernet cables for correct wiring and functionality. With LED indicators for each wire, the ability to detect short and open circuits, and simple operation, it’s an essential tool for professionals who need to verify LAN cable integrity. Its portable design makes it an excellent choice for technicians working in the field or on-site installations, ensuring that Ethernet cables are properly configured for optimal network performance.

he Proskit MT-1506 Pocket True-RMS Auto Range Multimeter is a compact, portable, and feature-rich digital multimeter designed for accurate electrical measurements in various applications. Its compact size, combined with True-RMS capabilities and auto-ranging functions, makes it an excellent tool for professionals and DIY enthusiasts alike. Below is a detailed description of its features and specifications: Key Features: True RMS Measurement: The Proskit MT-1506 is equipped with True RMS (Root Mean Square) measurement technology, which provides accurate readings for both sinusoidal and non-sinusoidal waveforms. This is especially important for accurately measuring power in modern electronic devices and equipment with distorted waveforms, such as inverters, UPS systems, and variable speed drives. Auto-Ranging Function: The meter features auto-ranging, meaning it automatically selects the correct measurement range based on the value being tested. This feature makes it easy to use, as you don't need to manually adjust the range for different measurements, ensuring both convenience and accuracy. Compact and Portable Design: As a pocket-sized multimeter, the MT-1506 is extremely compact and portable, making it convenient for fieldwork, on-site diagnostics, or carrying in a toolbox. Its small size does not compromise its functionality, providing professional-grade performance in a lightweight package. Wide Measurement Range: The Proskit MT-1506 is capable of measuring a broad range of electrical parameters, including: AC and DC Voltage: Measures voltages with a wide range, from millivolts (mV) to several hundred volts (V). AC and DC Current: Measures current, typically from microamperes (µA) to several amperes (A), allowing for testing in various applications such as electronics, appliances, and circuits. Resistance: Measures resistance in circuits, allowing users to check for continuity or test components like resistors, capacitors, or diodes. Diode and Continuity Testing: Includes diode testing and continuity checking with an audible beep when continuity is detected, which helps with quick circuit diagnostics. Large LCD Display: Despite its small size, the MT-1506 features a large LCD display, making it easy to read measurements clearly, even in dimly lit environments. Some models may include a backlight for visibility in low-light conditions, improving readability in a variety of settings. Data Hold Function: The Data Hold function allows the user to freeze the reading on the display, which is helpful when taking measurements in hard-to-reach places or when you need to record a reading without holding the meter in place. Low Power Consumption: The meter is designed with low power consumption, which extends battery life, making it ideal for prolonged use without the need to frequently change batteries. Safety Features: The MT-1506 is built with safety in mind, featuring overload protection and CAT III 600V safety rating, which allows it to safely measure electrical parameters in circuits up to 600V, making it suitable for use in residential and industrial applications. It also typically includes fuse protection to prevent damage to the meter in case of accidental overcurrent. Battery Powered: The multimeter operates on standard battery power, which ensures portability and ease of use in locations without direct access to external power sources. Multifunction Rotary Switch: The meter is equipped with a multifunction rotary switch that allows you to easily select the measurement type, range, and mode (voltage, current, resistance, etc.). The intuitive design of the switch makes it simple to navigate between settings quickly. Applications: Electrical Troubleshooting: Ideal for professionals and hobbyists diagnosing electrical problems in residential, commercial, and industrial settings. HVAC Systems: Great for measuring electrical parameters in heating, ventilation, and air conditioning systems. Automotive: Used for testing and troubleshooting electrical components in cars, trucks, and other vehicles. Home Appliances: Useful for checking the performance and safety of home appliances and electronics. DIY Projects: A handy tool for hobbyists and DIY enthusiasts working with electronics and electrical circuits. Safety Guidelines: Always ensure the multimeter is set to the correct mode before taking measurements to prevent damage to the device. Ensure that the meter is rated for the voltage and current levels being tested. Use the meter in accordance with its safety ratings (such as CAT III 600V) to avoid electrical hazards. Summary: The Proskit MT-1506 Pocket True-RMS Auto Range Multimeter is an excellent choice for those looking for a compact, reliable, and easy-to-use multimeter. With its True RMS capability, auto-ranging, broad measurement range, and safety features, it provides accurate readings for a wide variety of electrical testing tasks. Its pocket-sized design makes it highly portable, while its intuitive interface and display ensure users can quickly and easily perform measurements, making it an indispensable tool for both professionals and hobbyists.

The Proskit PK-2633, Network Test Tool Kit is a comprehensive toolset designed for network technicians, IT professionals, and DIY enthusiasts involved in setting up, maintaining, and troubleshooting network systems. This versatile kit includes essential tools for network installation, cabling, and troubleshooting, making it a great solution for working with local area networks (LANs), network cables, and connectors. Key Features: Complete Network Testing Solution: The Proskit PK-2633 kit includes tools to test and troubleshoot network cables, including Ethernet cables (CAT5, CAT5e, CAT6), telephone cables, and coaxial cables. This kit allows for quick diagnostics of common network issues, such as signal loss, miswiring, or poor connections. Network Cable Testing: Cable Tester: The kit includes a network cable tester that allows you to check the wiring and connectivity of Ethernet cables, coaxial cables, and telephone cables. It helps detect wiring faults, such as miswiring, open circuits, or short circuits, ensuring that cables are working properly before installation. The tester can display the status of each wire in a network cable, making it easy to troubleshoot any potential issues and ensure proper connection. Comprehensive Set of Tools: The kit includes essential crimping tools, cable strippers, and cutters for making and fixing network cables. Crimping Tool: This tool is used for crimping connectors (RJ-45, RJ-11) onto network cables, allowing you to make customized cable lengths for your network. Cable Strippers: For stripping insulation from Ethernet cables or telephone wires to prepare them for crimping or testing. High-Quality Construction: All tools in the Proskit PK-2633 kit are made from durable materials, ensuring they can withstand the wear and tear of regular use. The crimping tool is designed for precision and strength, ensuring that your network cables are securely connected and providing reliable performance. Ergonomic and User-Friendly: The tools in this kit feature ergonomic handles designed for comfort and easy use, reducing hand fatigue during extended work sessions. The non-slip grips ensure a secure and comfortable handling, even in demanding conditions. The cable tester is straightforward and simple to use, with clear indicators for quick results. Portable and Organized Storage: The Proskit PK-2633 comes with a compact, organized carrying case that holds all the tools in place and allows for easy transport and storage. The case is designed to keep tools securely in place, ensuring they stay organized and accessible during network setup or troubleshooting tasks. Versatile Applications: The kit is perfect for a variety of networking tasks, including: Testing network cables for proper connectivity and identifying faults. Making custom-length cables by cutting, stripping, and crimping Ethernet or telephone cables. Troubleshooting existing network systems to identify wiring issues and faulty connections. Setting up home or office networks by making sure all cables are correctly wired and functional. Maintaining and repairing network infrastructure. Cost-Effective Solution: The Proskit PK-2633 kit offers a complete set of essential tools at an affordable price, making it a cost-effective option for network professionals and hobbyists alike. With all the necessary tools for network cable maintenance, testing, and installation, this kit offers great value for its price. Included Components: The Proskit PK-2633 Network Test Tool Kit typically includes: Network Cable Tester: For testing the wiring and connectivity of network cables, including Ethernet, coaxial, and telephone cables. Crimping Tool: For crimping RJ-45, RJ-11, and other connectors onto network cables. Cable Strippers: For stripping insulation from cables before making connections. Cable Cutter: For cutting cables to custom lengths. Modular Connectors: A variety of RJ-45 and RJ-11 connectors for use with network cables. Test Leads: For testing the cables with the network tester. Compact Carrying Case: A portable and organized case for storing and transporting all the tools. Applications: Network Cable Installation: Perfect for setting up and connecting Ethernet networks, including both home and office installations. Cable Troubleshooting: Ideal for diagnosing and repairing faulty Ethernet, telephone, or coaxial cables in existing network setups. Making Custom Cables: Enables you to cut, strip, and crimp cables to specific lengths for use in a wide range of network setups and repairs. IT Support and Maintenance: Used by network professionals to ensure that cables are working correctly and to fix any issues that arise during network maintenance or expansion. Home Networking: Great for DIY enthusiasts or homeowners who want to set up or troubleshoot their home network. Advantages: Comprehensive Network Testing: The inclusion of a network cable tester ensures that you can quickly and accurately diagnose issues with network connections. High-Quality and Durable Tools: The tools in this kit are designed to be durable and reliable, making them suitable for frequent use. User-Friendly Design: The ergonomically designed handles and easy-to-read tester make the kit suitable for both professionals and beginners. Portable and Organized: The compact carrying case makes it easy to transport the tools to job sites or store them safely when not in use. Cost-Effective: Offers a complete set of tools for network testing and installation at a reasonable price, making it accessible for both professionals and hobbyists. Conclusion: The Proskit PK-2633 Network Test Tool Kit is an excellent choice for network technicians, IT professionals, and DIY enthusiasts who need a reliable, affordable, and well-organized toolkit for network cable installation, maintenance, and troubleshooting. With its comprehensive selection of testing, crimping, stripping, and cutting tools, it provides everything needed to set up or repair Ethernet, coaxial, and telephone networks. The high-quality construction, ergonomic design, and compact storage options make this kit a practical and efficient solution for network-related tasks. Whether you're setting up a new network or maintaining an existing one, the Proskit PK-2633 toolkit offers great value and reliability.

The Proskit 3PK-NT018N-SC Fiber Tester SC Type is a specialized tool designed for testing and analyzing fiber optic cables and connections. Specifically designed for SC-type fiber optic connectors, this tester allows technicians and engineers to check the performance and integrity of fiber optic systems quickly and accurately. It is essential for ensuring the reliability of fiber optic installations in various settings, such as telecommunications, data centers, and networking environments. Key Features: SC Type Compatibility: The Proskit 3PK-NT018N-SC Fiber Tester is specifically designed to work with SC-type connectors, which are commonly used in telecommunications and data communication networks. The SC (Subscriber Connector) is a push-pull connector that is widely recognized for its high-performance characteristics. This tester ensures accurate testing of SC connectors, making it ideal for professionals working in industries where SC connectors are standard. Easy-to-Read Digital Display: The tester is equipped with a digital display that shows fiber optic signal strength or optical power level, giving users a quick and clear readout of the tested fiber’s performance. The digital readout simplifies the testing process, allowing technicians to analyze results efficiently without confusion. Precise Optical Power Measurement: The Proskit 3PK-NT018N-SC Fiber Tester is capable of measuring optical power levels with high accuracy. This ensures that fiber optic cables are delivering the appropriate signal strength, and any potential issues such as signal degradation, loss, or improper termination can be detected. It typically measures power in dBm (decibels milliwatts), a standard unit for representing signal strength in fiber optic systems. Compact and Portable: The 3PK-NT018N-SC is lightweight and compact, making it highly portable. Its easy-to-carry design ensures that technicians can take the tester to field sites or use it in tight spaces without any hassle. It is convenient for on-the-go testing and ensures that professionals can perform fiber checks wherever needed, whether on installation sites, during repairs, or for regular maintenance checks. Quick and Simple Testing: The fiber tester allows for quick, one-step testing. Technicians can easily connect the tester to an SC-type connector and receive an immediate reading. This simplicity saves time and enhances productivity, making the tester an essential tool for professionals working in fast-paced environments. Some models might include a single-button operation for ease of use, which minimizes the learning curve and makes it suitable for both experienced technicians and newcomers to fiber optic testing. Battery-Powered: The Proskit 3PK-NT018N-SC Fiber Tester is typically powered by batteries, ensuring that the device is portable and easy to use in the field. Its battery-operated nature eliminates the need for external power sources, making it a convenient tool for remote or on-site testing. Some models may include an automatic power-off feature to conserve battery life when not in use. Durable Construction: The tester is built with durability in mind, designed to withstand the demands of fieldwork. The robust casing helps protect the internal components from minor impacts, dust, and moisture, ensuring long-lasting performance even in harsh environments. Its construction is ideal for use in industrial settings, telecommunications, and outdoor environments where fiber optic cables are exposed to various conditions. Wide Range of Applications: Telecommunications: Used for testing fiber optic lines and ensuring proper signal transmission in telecom networks. Data Centers: Essential for checking the integrity and signal strength of fiber optic connections that form the backbone of data communication. Networking: Ideal for troubleshooting and verifying fiber optic cables used in LANs (Local Area Networks), WANs (Wide Area Networks), and other networking infrastructures. Installation and Maintenance: Critical for installers and technicians to verify that fiber optic systems are functioning as expected during both installation and routine maintenance checks. Advantages: Accuracy: Provides reliable and precise optical power measurements, helping ensure optimal performance of fiber optic systems. Portability: Lightweight, compact design makes it easy to carry and use on-site or in tight spaces. SC-Type Specific: Tailored specifically for SC-type connectors, ensuring compatibility and reliable testing. Ease of Use: The simple, one-button operation allows for quick and efficient testing, ideal for both novice and experienced users. Durability: The robust construction ensures that the tester can withstand the rigors of fieldwork, ensuring long-lasting reliability. Applications: Telecommunication Networks: Used by engineers and technicians to verify the signal quality and integrity of fiber optic links. Fiber Optic Installation: During the installation process, the tester helps ensure that all fiber optic connectors are functioning correctly and that the installation meets required standards. Troubleshooting: Helps professionals identify issues like signal loss, attenuation, or faulty connectors in fiber optic systems. Maintenance: Essential for routine checks to ensure that fiber optic systems continue to perform optimally over time, preventing issues that could affect system performance. Testing in Data Centers: Used to verify the health of fiber optic connections and ensure high-speed data transmission. Conclusion: The Proskit 3PK-NT018N-SC Fiber Tester SC Type is a specialized, accurate, and user-friendly tool designed for testing fiber optic systems that utilize SC connectors. It is an invaluable asset for technicians working in fields such as telecommunications, networking, and data centers. With its precise measurements, easy-to-read display, and portability, it enables fast and reliable testing of fiber optic cables, ensuring that the systems are running efficiently and meeting performance standards. Whether you’re installing new systems, performing routine maintenance, or troubleshooting existing networks, this tester provides the necessary functionality for high-quality fiber optic performance verification.

The Proskit SS-956B Smart Rework Station with Vacuum Pickup is a professional-grade, versatile tool designed for precision soldering and rework tasks, especially in the field of electronics repair, assembly, and prototyping. This station combines advanced features such as a rework station, vacuum pickup, and temperature control in one unit, making it ideal for handling delicate components like surface-mount devices (SMDs), IC chips, and other small electronics components. Key Features: Smart Rework Station: The Proskit SS-956B integrates both hot air rework and soldering iron functions into a single station, allowing for more efficient and controlled soldering and desoldering. This makes it perfect for delicate and complex rework tasks, such as SMD soldering and desoldering, IC replacement, and PCB (printed circuit board) repairs. The hot air function is ideal for desoldering and reflow soldering, while the soldering iron is used for precise, localized soldering work. Vacuum Pickup: The vacuum pickup tool is a standout feature of this station. It helps users safely pick up and place small components, particularly SMDs and ICs, without causing damage or stress to the parts. The vacuum system ensures that delicate components can be handled with care, minimizing the risk of accidental damage during removal or replacement. Digital Temperature Control: The station offers digital temperature control with adjustable heat settings for both the soldering iron and hot air gun. Users can easily set and monitor the exact temperature required for different components and tasks. The temperature control ranges from 200°C to 480°C (392°F to 896°F), providing a wide range of settings for both soldering and desoldering tasks. Hot Air Rework Function: The hot air rework feature uses controlled airflow and precise temperature to reflow solder, making it easier to remove or replace surface-mount components. The station allows users to adjust both the airflow and temperature, providing flexibility for different rework applications. It includes a high-efficiency heating element for fast heating and stable temperature maintenance, ensuring that delicate components are not exposed to excessive heat. Automatic Cooling Function: The station is equipped with an automatic cooling function that activates when the hot air gun is turned off. This feature helps extend the life of the heating element and ensures that the components being worked on are cooled down gradually, reducing the risk of thermal shock. Ergonomic and User-Friendly Design: The ergonomically designed handle on both the soldering iron and hot air gun ensures comfortable operation for extended periods of use. The easy-to-read LCD screen displays real-time temperature information, making it simple to monitor and adjust the settings. The vacuum pickup tool is lightweight and comfortable to handle, making it easier to manipulate and work with small components. Soldering Iron with Adjustable Temperature: The soldering iron included in the station provides precise control over the temperature for detailed soldering tasks. This is especially useful for tasks such as fine-pitch component soldering or board-level repairs. Overload Protection: The station includes overload protection and temperature safety features to prevent overheating and ensure the longevity of the heating elements. This provides extra safety when working with sensitive components or during extended use. Multiple Nozzles for Hot Air Gun: The hot air gun comes with a variety of interchangeable nozzles, allowing users to select the appropriate nozzle size for different tasks, such as precision work on small components or larger rework applications. Complete Set for Rework: The Proskit SS-956B comes with a complete set of accessories, including the vacuum pickup tool, soldering iron, hot air gun, nozzles, and other necessary components to perform both soldering and rework tasks with ease. Applications: Surface-Mount Device (SMD) Rework: The station is ideal for working with SMD components that require precise heat control for desoldering and soldering, such as microchips and resistors. IC Chip Removal/Installation: The vacuum pickup and hot air gun make it perfect for removing and installing IC chips without causing damage. PCB Rework and Repair: This station is designed for working on PCBs, offering both hot air reflow soldering and soldering iron capabilities for detailed repairs. Mobile Phone and Laptop Repairs: It's particularly useful for repairing mobile phones, laptops, and other consumer electronics that often require SMD soldering or rework. Prototyping: The station provides an effective solution for electronics prototyping, especially when working with small, delicate components that need precise handling and heat control. Electronics Assembly: Useful for assembling electronics where components like SMDs need to be placed accurately onto the PCB and soldered. Advantages: All-in-One Functionality: The multi-functional design combines a soldering iron, hot air rework station, and vacuum pickup tool into one compact unit, making it easier for users to perform a wide variety of tasks without needing separate tools. Precise Control: With its digital temperature control, the station provides precise heat management for both soldering and rework tasks, ensuring reliable and high-quality results. Vacuum Pickup Tool: The vacuum pickup tool is a major advantage for handling delicate SMDs and ICs, ensuring that components are picked up and placed without damage. User-Friendly: The LCD display and easy-to-use controls make the station user-friendly, even for technicians who are new to rework or soldering tasks. Energy-Efficient: Features like automatic cooling and overload protection help prolong the lifespan of the station while ensuring safe, energy-efficient operation. Versatility: The ability to work with both small, intricate components and larger components makes this station versatile, suitable for a wide range of electronics repair, assembly, and prototyping tasks. Conclusion: The Proskit SS-956B Smart Rework Station with Vacuum Pickup is a powerful, all-in-one solution for professionals and hobbyists working in electronics repair, assembly, and prototyping. Combining a hot air rework station, soldering iron, and vacuum pickup tool, it offers versatility and precision for a wide range of tasks, from SMD soldering to IC chip handling. With features like digital temperature control, automatic cooling, and vacuum pickup, it ensures high-quality, reliable results while minimizing the risk of damage to delicate components. This station is a valuable addition to any electronics workshop, offering the functionality and ease of use required for effective rework and repair tasks.

The Proskit Fiber Cleaver with Scrap Collector is a specialized tool designed for precisely cleaving fiber optic cables, ensuring clean and smooth cuts that are essential for fiber optic splicing and installation. It features a built-in scrap collector that helps manage fiber waste, keeping the workspace clean and organized. This tool is ideal for professionals working in telecommunications, data networks, and other fiber optic applications. Key Features: High Precision Cleaving: The cleaver is engineered to deliver precise and clean cuts on fiber optic cables. Its sharp blade ensures a straight, smooth cleave, which is essential for successful fiber optic splicing and achieving low splice loss. This precision is critical to ensure the fibers align correctly during splicing for optimal signal performance. Built-in Scrap Collector: One of the standout features of the Proskit Fiber Cleaver is the scrap collector. This feature helps contain the small fiber offcuts and dust produced during cleaving, reducing the mess in your workspace. It also minimizes the risk of fiber contamination, making the cleaving process more efficient and cleaner. Durable Blade: The cleaver is equipped with a high-quality, durable blade designed for longevity. This ensures the tool maintains its performance over time, providing consistent cleaving quality. The blade is replaceable, making it easy to maintain the tool for continued use. Adjustable Cleaving Mechanism: The cleaver includes an adjustable cleaving angle, allowing users to fine-tune the cleave depth and alignment based on the specific fiber optic cable being worked with. This feature adds flexibility and versatility for working with different fiber types and sizes. Ergonomic Design: The tool is designed for ease of use with an ergonomic, compact, and lightweight build. Its comfortable handle allows users to work for extended periods without experiencing hand fatigue, making it ideal for both fieldwork and workshop applications. Wide Compatibility: The Proskit Fiber Cleaver is compatible with various fiber optic cable types, including both single-mode and multi-mode fibers. Its versatility makes it suitable for different fiber optic applications, such as network installations, repairs, and testing. Applications: Fiber Optic Splicing: Used to cleave fiber ends before performing splicing, ensuring a clean, smooth surface for an optimal splice. Telecommunications and Networking: Ideal for professionals working on telecommunications infrastructure or fiber optic network installations. Fiber Optic Testing and Maintenance: Used for preparing fiber optic cables for testing, ensuring proper cable termination. Data Centers: Essential for preparing fiber optic cables in data centers, where high-speed and reliable connections are necessary. DIY Fiber Optic Projects: Useful for hobbyists working with fiber optic cables for personal or home networking projects. Advantages: Clean, Precise Cleaving: Ensures that the fiber optic cable is cleaved accurately, providing a smooth, flat surface for splicing, which reduces splice loss and enhances network performance. Efficient Scrap Management: The built-in scrap collector keeps fiber waste contained, making the workspace cleaner and more organized. Durable and Long-Lasting: The high-quality blade and construction of the tool ensure it can handle regular use, providing consistent, reliable cleaving results. User-Friendly: Its ergonomic, compact design makes it easy to handle and operate, even for extended periods, ensuring comfort and control. Versatility: Compatible with various fiber types and sizes, this cleaver is versatile for different fiber optic applications, making it a valuable tool in any technician's toolkit. Conclusion: The Proskit Fiber Cleaver with Scrap Collector is a high-quality, precision tool designed for fiber optic cable preparation. It provides clean, accurate cleaves, essential for successful splicing and installation. The inclusion of a scrap collector adds convenience and ensures a tidy workspace, while the tool's durable construction and ergonomic design make it a reliable choice for professionals working in fiber optic networks, telecommunications, and data centers. Whether you're a seasoned technician or a DIY enthusiast, this cleaver is an excellent tool for achieving optimal results in fiber optic projects.

Kraftform Kompakt Micro set for precision mechanical work. Suitable for the take-up of bits with 4 mm halfmoon drive (Wera series 9) and bits with 4 mm HIOS drive (Wera series 21). Electrical surface resistance of ≤ 109 Ohm for secure protection against electrostatic charge. Manufactured in accordance with DIN EN 61340-5-1. Compact handle/interchangeable blade system for fast blade change. Kaftform Micro handle with twist cap and free-turning zone for rapid twisting, making any time-consuming repositioning of the fingers unnecessary. Power zone with integrated soft zones for the transfer of higher tightening and loosening torque. Precision zone directly above the blade for the right angle for adjustment work. Bits for manual as well as power tool operations. Rapid fixing of the bit: just push the bit into the insert for automatic locking and a secure fit. To change the bit, simply push the sleeve forward and remove. Free-turning sleeve for simple guidance of the tool during the screwdriving process. Bit holder suitable for the take-up of bits with 4 mm halfmoon or HIOS drive Handle out of material with a surface resistance of ≤ 109 Ohm Handle/Interchangeable blade system for rapid exchange of the blade Kraftform Micro handle with rotating cap for rapid spinning Bits for manual as well as power tool operations Kraftform Micro ESD bit holder Wera ESD Tools The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. High protection The electric surface resistance of the Wera ESD material is ≤ 109 ohm. This securely protects components against electrostatic energy and associated damage. For Halfmoon and HIOS Bits Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. Kraftform Micro handle Multi-component screwdriver handle for ergonomic working. The precision zone The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. Rotating cap and fast-turning zone The fast-turning zone just below the rotating cap allow rapid twisting. This makes time-consuming grip adjustments as with other conventional precision screwdrivers unnecessary. Kraftform Kompakt Micro 20 ESD 1, 20 pieces contents: 1013 Kraftform Micro ESD Bitholding screwdriver 05300004001 1 x 97 mm 851/9 C J PH bits, halfmoon 05135270001 1x PH 00 x 44 x 1.8 mm 1) 05135272001 1x PH 0 x 44 x 1.8 mm 2) 05135276001 1x PH 1 x 44 x 3 mm 1) 867/9 C TORX® bits, halfmoon 05135220001 1x TX 1 x 44 mm 05135221001 1x TX 2 x 44 mm 05135222001 1x TX 3 x 44 mm 05345352001 1x TX 4 x 44 mm 05345351001 1x TX 5 x 44 mm 05345350001 1x TX 6 x 44 mm 867/9 C IP TORX PLUS® bits 05135230001 1x 1 IP x 44 mm 05135231001 1x 2 IP x 44 mm 05135232001 1x 3 IP x 44 mm 05326310001 1x 4 IP x 44 mm 840/9 C bits Hex-Plus 05135268001 1x 1.5 x 44 mm 05135269001 1x 2 x 44 mm 800/9 C bits 05135265001 1x 0.23 x 1.5 x 44 mm 05135266001 1x 0.40 x 2 x 44 mm 05135267001 1x 0.50 x 3 x 44 mm 867/9 IPR TORX PLUS® bits 1x 1 IPR x 44x1.8 mm