Kraftform Kompakt Micro set for precision mechanical work. Suitable for the take-up of bits with 4 mm halfmoon drive (Wera series 9) and bits with 4 mm HIOS drive (Wera series 21). Electrical surface resistance of ≤ 109 Ohm for secure protection against electrostatic charge. Manufactured in accordance with DIN EN 61340-5-1. Compact handle/interchangeable blade system for fast blade change. Kaftform Micro handle with twist cap and free-turning zone for rapid twisting, making any time-consuming repositioning of the fingers unnecessary. Power zone with integrated soft zones for the transfer of higher tightening and loosening torque. Precision zone directly above the blade for the right angle for adjustment work. Bits for manual as well as power tool operations. Rapid fixing of the bit: just push the bit into the insert for automatic locking and a secure fit. To change the bit, simply push the sleeve forward and remove. Free-turning sleeve for simple guidance of the tool during the screwdriving process. Bit holder suitable for the take-up of bits with 4 mm halfmoon or HIOS drive Handle out of material with a surface resistance of ≤ 109 Ohm Handle/Interchangeable blade system for rapid exchange of the blade Kraftform Micro handle with rotating cap for rapid spinning Bits for manual as well as power tool operations Kraftform Micro ESD bit holder Wera ESD Tools The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. High protection The electric surface resistance of the Wera ESD material is ≤ 109 ohm. This securely protects components against electrostatic energy and associated damage. For Halfmoon and HIOS Bits Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. Kraftform Micro handle Multi-component screwdriver handle for ergonomic working. The precision zone The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. Rotating cap and fast-turning zone The fast-turning zone just below the rotating cap allow rapid twisting. This makes time-consuming grip adjustments as with other conventional precision screwdrivers unnecessary. Kraftform Kompakt Micro 20 ESD 1, 20 pieces contents: 1013 Kraftform Micro ESD Bitholding screwdriver 05300004001 1 x 97 mm 851/9 C J PH bits, halfmoon 05135270001 1x PH 00 x 44 x 1.8 mm 1) 05135272001 1x PH 0 x 44 x 1.8 mm 2) 05135276001 1x PH 1 x 44 x 3 mm 1) 867/9 C TORX® bits, halfmoon 05135220001 1x TX 1 x 44 mm 05135221001 1x TX 2 x 44 mm 05135222001 1x TX 3 x 44 mm 05345352001 1x TX 4 x 44 mm 05345351001 1x TX 5 x 44 mm 05345350001 1x TX 6 x 44 mm 867/9 C IP TORX PLUS® bits 05135230001 1x 1 IP x 44 mm 05135231001 1x 2 IP x 44 mm 05135232001 1x 3 IP x 44 mm 05326310001 1x 4 IP x 44 mm 840/9 C bits Hex-Plus 05135268001 1x 1.5 x 44 mm 05135269001 1x 2 x 44 mm 800/9 C bits 05135265001 1x 0.23 x 1.5 x 44 mm 05135266001 1x 0.40 x 2 x 44 mm 05135267001 1x 0.50 x 3 x 44 mm 867/9 IPR TORX PLUS® bits 1x 1 IPR x 44x1.8 mm

High quality bits with combination profile Phillips/slotted. In electrical applications screws with mixed geometry (slotted and Phillips cross-recess) are quite common. Bits having a PlusMinus profile are optimum for addressing these screws. Tough viscous for universal use. ¼“ hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For PlusMinus screws (combination profile Phillips/slotted) Also for jobs on terminal blocks, fuse boxes, switches and relays Tough for hard materials 1/4” hexagon drive (Wera connecting series 4) Tough bits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. Code mm inch mm 05059720001 # 1 70 2 3/4“ 4.5 05059721001 # 2 70 2 3/4” 6

9 Wera bits. 1 holder 813 R Kraftform with Rapidaptor quick-release chuck, multi-component for high working speeds and particularly ergonomic screwdriving. A screwdriver set cannot be more compact Kraftform holder with Rapidaptor quick-release chuck Torsion design of the bits against premature wear Tough viscous bits for universal use Convenient and robust storage Why is the right tool so often not at hand? The reason: too many tools and overly-heavy tool bags can make it bothersome to carry them onsite. So for us it was a clear challenge: to design a tool that is suitable for a whole host of applications and can be easily taken along to jobs at other sites. Our solution: Kraftform Kompakt tools. A handle into which blades with a range of different profiles can be inserted. Compactly and protectively housed in a light and robust textile pouch or plastic box. Handle/interchangeable blade system The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Manual and power tool operations The sets come with a Kraftform handle, quick-release chuck and bits for manual and power tool operations. Rapidaptor holder Rapid bit change without needing any additional tools. One-hand operation with a freely spinning sleeve for simplified guidance of the tool. Kraftform The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Prevents hand injuries The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. Storage and transport In a robust storage box. Kraftform Kompakt 10, 12 Set contents: 813 R 05051272001 1 x 1/4" x 90 mm 851/1 J 05135040001 1 x PH 00 x 25 x 2 mm 05135041001 1 x PH 0 x 25 x 2,5 mm 05135042001 1 x PH 1 x 25 x 3 mm 851/1 TZ PH 05056510001 1 x PH 2 x 25 mm 867/1 TZ TORX® 05066301001 1 x TX 6 x 25 mm 05066300001 1 x TX 5 x 25 mm 05066302001 1 x TX 7 x 25 mm 05066303001 1 x TX 8 x 25 mm 05066304001 1 x TX 9 x 25 mm

Wera torque screwdriver. Dependable protection against electrostatic energy and associated damage. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with ¼“ hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftfrom ESD torque screwdriver with Rapidadptor Quick-release chuck Multi-component kraftfrom handle for fast and low fatigue working Hexagonal anti-roll feature against rolling away Rapidaptor quick-release chuck for bits with 1/4” hex head drive Adjustable Torque Screwdrivers Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. Wera ESD Tools The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. Setting with Speed Simple setting of the required torque by hand. Easy-to-read Easy-to-read scale value. Attachable magnifying glass Articles 7430, 7431 and 7432 all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. Measurement accuracy Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque Unlimited torque for loosening seized screws. Versatile Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly.

Kraftform Kompakt Micro set for precision mechanical work. Suitable for the take-up of bits with 4 mm halfmoon drive (Wera series 9) and bits with 4 mm HIOS drive (Wera series 21). Electrical surface resistance of ≤ 109 Ohm for secure protection against electrostatic charge. Manufactured in accordance with DIN EN 61340-5-1. Compact handle/interchangeable blade system for fast blade change. Kaftform Micro handle with twist cap and free-turning zone for rapid twisting, making any time-consuming repositioning of the fingers unnecessary. Power zone with integrated soft zones for the transfer of higher tightening and loosening torque. Precision zone directly above the blade for the right angle for adjustment work. Bits for manual as well as power tool operations. Rapid fixing of the bit: just push the bit into the insert for automatic locking and a secure fit. To change the bit, simply push the sleeve forward and remove. Free-turning sleeve for simple guidance of the tool during the screwdriving process. ESD-safe tool thanks to surface resistance of ≤ 109 Ohm Kraftform Micro ESD bit holder Holder with anti-roll feature, rotating cap and quick-release chuck Bit holder suitable for the take-up of bits with 4 mm halfmoon or HIOS drive In a practical pouch Wera ESD Tools The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. High protection The electric surface resistance of the Wera ESD material is ≤ 109 ohm. This securely protects components against electrostatic energy and associated damage. For Halfmoon and HIOS Bits Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. Kraftform Micro handle Multi-component screwdriver handle for ergonomic working. The precision zone The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. Rotating cap and fast-turning zone The fast-turning zone just below the rotating cap allow rapid twisting. This makes time-consuming grip adjustments as with other conventional precision screwdrivers unnecessary. 05135973001 1013 Kraftform Micro ESD Bitholding screwdriver 05300004001 1x 97 mm 851/9 C J PH bits, halfmoon 05134605001 1x PH 000 x 44 x 1.5 mm 05135270001 1x PH 00 x 44 x 1.8 mm 05135272001 1x PH 0 x 44 x 1.8 mm 867/9 C TORX® bits, halfmoon 05135220001 1x TX 1 x 44 mm 05135221001 1x TX 2 x 44 mm 05135222001 1x TX 3 x 44 mm 05345352001 1x TX 4 x 44 mm 05345351001 1x TX 5 x 44 mm 867/9 C IP TORX PLUS® bits 05135230001 1x 1 IP x 44 mm 05135231001 1x 2 IP x 44 mm 05135232001 1x 3 IP x 44 mm 05326310001 1x 4 IP x 44 mm 867/9 IPR TORX PLUS® bits 1x 1 IPR x 44x1.5 mm 872/9 bits for Microstix® screws 05066850001 1x m x 44 mm 05066851001 1x 00 x 44 mm 05066852001 1x F x 44 mm 05066853001 1x 0 x 44 mm 800/9 C bits 05135265001 1x 0.23 x 1.5 x 44 mm 05135264001 1x 0.35 x 2.5 x 44 mm 869/9 Nutsetters 05135224001 1x 2.5 x 44 mm

As installation spaces become increasingly confined, it remains necessary that tools enable users to work successfully. Narrow spaces require additional placement points of the tool, to allow screws to be accessed and actuated. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be “taken” every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With Take it easy tool finder: colour coding by size. The Joker pouches are suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end “takes” the screw every 15° Slim ring side with 15° crank Suitable for docking with the Wera 2go system For very tight spaces The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be “accessed” every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Joker 6003: For return angles of less than 30° Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. Double-hex geometry The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. Joker 6003: Tilted ring side The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). Suitable for docking with the Wera 2go system The Joker pouches are suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back. Set contents: 05020231001 6003 Joker Combination wrench 05020200001 1x 8 x 115 mm 05020201001 1x 10 x 125 mm 05020202001 1x 11 x 135 mm 05020203001 1x 12 x 148 mm 05020204001 1x 13 x 160 mm 05020205001 1x 14 x 167 mm 05020206001 1x 15 x 174 mm 05020207001 1x 16 x 182 mm 05020208001 1x 17 x 190 mm 05020209001 1x 18 x 210 mm 05020210001 1x 19 x 230 mm Hook and Loop Fastener Strip 240 1x 50x240 mm

16-piece wrench set for bicycle applications with torque control including Wera Clique-Torque wrench A 5 (2.5-25 Nm) Sockets and bit sockets for the most popular screw profiles on road bikes, mountain bikes and e-bikes Easy setting and saving of the desired torque value with audible and tactile click when the scale value is reached (click 1) Safely quantified force: when the set value is reached, the torque wrench triggers audibly and noticeably (click 2) Precise to ± 4% as per DIN EN ISO 6789-1:2017-07. The 16-piece set from the screwdriving tool specialist Wera solves the most important screwdriving problems associated with bicycles, with reliable control of applied torque to protect sensitive components. With a click-torque wrench in the unmistakable Wera design.Very robust design with high accuracy as per DIN EN ISO 6789-1: 2017-07. Easy setting and saving of the default values. The audible and tactile snapping on reaching the scale values also facilitates the safe setting of the desired torque values. The robust release mechanism guarantees a clearly audible and tactile trigger signal when the set torque is reached. For clockwise torque-control and with a reversible 45-tooth ratchet. The torque wrench is extremely space-saving and supplemented with accessories that are suitable for the torque range and adapted to the most common screwed connections on bicycles; in a robust, surface-friendly textile box. Included are: Click Torque A 5, 1/4“, 2.5 - 25 Nm, 4 sockets with 1/4” drive, 7 Hex Plus hexagon bit sockets and 4 TORX® bit sockets. Sockets and bit sockets with “Take it easy” tool finder with colour coding by size - for easy and quick location of the required tool. Bit sockets with holding function for extra comfortable screwdriving without the screw falling off the tool. Incredibly compact arrangement for a lot of tools in a small space. Textile box with very high robustness and longevity. Additional surface protection through the textile outer material. Low weight and volume for easier mobility. Bit sockets with all the benefits of Wera bit technology such as fitting accuracy, wear resistance and concentric run-out properties Set contents: Click-Torque A 5: 05075604001 1 x 1/4" x 2.5-25 Nm 8767 A: 05003390001 1 x TX 10 x 28 mm 05003391001 1 x TX 20 x 28 mm 05003392001 1 x TX 25 x 28 mm 05003393001 1 x TX 30 x 28 mm K240: 1 x 50 x 240 mm 8790 HMA: 05003509001 1 x 10 x 23 mm 05003512001 1 x 13 x 23 mm 05003513001 1 x 14 x 23 mm 05003499001 1 x 15 x 23 mm 8740 A HF: 05003332001 1 x 3 x 28 mm 05003333001 1 x 4 x 28 mm 05003335001 1 x 5 x 28 mm 05003336001 1 x 5 x 100 mm 05003337001 1 x 6 x 28 mm 05003338001 1 x 6 x 100 mm 05003339001 1 x 8 x 28 mm

Torque tool with adjustable torque of 2.0 to 6.0 cNm (accuracy ± 10%). Compact handle/interchangeable blade system for torque controlled precision screwdriving. The Kraftform Micro ESD torque screwdriver is ideal for torque controlled jobs on electrostatically-susceptible components. Suitable for the take-up of bits with 4 mm halfmoon drive (Wera series 9) and 4 mm HIOS drive (Wera series 21). Tamperproof. Distinct audible and perceivable excess load signal when the pre-set torque value is reached. Unlimited manual loosening torque. Electrical surface resistance of ≤ 109 Ohm for secure protection against electrostatic charge. Manufactured in accordance with DIN EN 61340-5-1. Handle/Interchangeable blade system for rapid blade change. Kaftform Micro handle with twist cap and free-turning zone for rapid twisting, making any time-consuming repositioning of the fingers unnecessary. Power zone with integrated soft zones for the transfer of higher tightening and loosening torque. Precision zone directly above the blade for the right angle for adjustment work. Rapid fixing of the bit: just push the bit into the insert for automatic locking and a secure fit. To change the bit, simply push the sleeve forward and remove. Free-turning sleeve for simple guidance of the tool during the screwdriving process. Bits suitable for manual as well as power tool operations with electric screwdrivers (e.g. HIOS, Delvo, Sehan). Applications for example on smartphones, cell phones, cameras, electrical appliances, in dental labs and dental surgeries. Code art. no. Nm Nm mm inch 05074802001 1430 ESD 0.02-0.06 0.02-0.06 141 5 7/16" Adjustable Kraftform Micro ESD torque screwdriver with quick-release chuck ESD-safe tool thanks to surface resistance of ≤ 109 Ohm Distinct audible and perceivable excess load signal when the pre-set torque value is reached Suitable for bits with 4 mm halfmoon and 4 mm HIOS drive Applications e.g. on smartphones, mobile phones, cameras, electronic equipment Adjustable torque screwdrivers They can be adjusted by hand to the corresponding scale value. Also available in ESD version (also with take-up for HIOS/Halfmoon bits) and with Kraftform Micro handle. Wera ESD Tools The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. High protection The electric surface resistance of the Wera ESD material is ≤ 109 ohm. This securely protects components against electrostatic energy and associated damage. For Halfmoon and HIOS Bits Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. Adjustable Torque Screwdrivers Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. Attachable magnifying glass Articles 1430 ESD and 1431 ESD, all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. The fast-turning zone The fast-turning zone just below the rotating cap allows rapid spinning. The power zone The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw.

Premium bits for TORX BO socket screws. TORX® BO screws have a protruding pin in their drive profile. This prevents unauthorized loosening, as these screws cannot be operated with “normal” TORX tools. Only special TORX BO tools have a bore which can mount the pin. Tough, for universal use. 1/4“ hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For recessed TORX screws with securing pin TORX® bit with bore hole on the output side Tough for hard materials TORX with borehole (BO) TORX tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that ”normal“ TORX tools cannot be used. This pin fits into the borehole of TORX BO tools allowing safety screws to be unfastened. Tough bits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. Tip Size Blade Length Blade Length Blade diameter Code mm inch mm 05060050001 TX 10 89 3 1/2” 4.0 05060051001 TX 15 89 3 1/2“ 4.0 05060052001 TX 20 89 3 1/2” 4.5 05060053001 TX 25 89 3 1/2“ 6.0 05060054001 TX 30 89 3 1/2” 6.0 05060056001 TX 40 89 3 1/2"