The Proskit MT-1508 Pocket Autorange Multimeter is a compact, feature-packed, and user-friendly digital multimeter designed for accurate electrical measurements. Its auto-ranging function and portable design make it an ideal tool for professionals and hobbyists who require quick and precise measurements in a variety of electrical applications. Key Features: Auto-Ranging Function: The auto-ranging feature automatically adjusts the measurement range based on the value being measured. This eliminates the need for manual range selection, making the multimeter easy to use, especially for beginners or those working on different types of circuits. The meter will automatically detect the best range for voltage, current, and resistance. Compact and Portable Design: The Proskit MT-1508 is designed to be pocket-sized, making it extremely portable and easy to carry around for fieldwork or on-the-go electrical testing. Despite its small size, it offers a range of features typically found in larger multimeters. Wide Measurement Range: The MT-1508 is capable of measuring a variety of electrical parameters, including: AC/DC Voltage: It can measure both AC (alternating current) and DC (direct current) voltage with a wide range of values, from millivolts (mV) up to several hundred volts (V). AC/DC Current: The meter can measure AC and DC currents, typically ranging from microamperes (µA) to amperes (A), making it versatile for different applications. Resistance: The MT-1508 measures resistance in ohms (Ω), helping users check for continuity or verify component specifications in electrical circuits. Diode and Continuity Testing: The multimeter includes a diode test feature to check diodes and a continuity test function that provides an audible beep when a circuit is complete. Large, Easy-to-Read Display: The meter comes with a large LCD display that provides clear, easy-to-read results. This display is typically backlit, making it suitable for use in low-light environments. Data Hold Function: The Data Hold function allows users to freeze the displayed measurement on the screen, making it easy to record or analyze the reading without needing to keep the meter in place. Low Power Consumption: The Proskit MT-1508 is designed to have low power consumption, ensuring longer battery life and fewer interruptions during use. Safety Features: The MT-1508 includes overload protection, ensuring that the meter is safeguarded from damage when measuring beyond its rated capacity. The multimeter typically adheres to the CAT III 600V safety standard, making it suitable for use in residential and industrial environments where voltages up to 600V are present. Battery Powered: This multimeter operates on standard battery power, which makes it convenient for use in locations without access to a power source. Multifunction Rotary Switch: The rotary switch enables easy selection of measurement functions, such as voltage, current, resistance, and diode tests, allowing for quick transitions between different types of measurements. Applications: Electrical Troubleshooting: Ideal for diagnosing issues in household, industrial, or commercial electrical systems. Automotive: Can be used for checking automotive electrical systems, including battery voltage, current draws, and circuit resistance. HVAC: Great for measuring electrical parameters in heating, ventilation, and air conditioning systems. DIY and Electronics: Useful for electronics enthusiasts and DIY projects that involve testing circuits and components. Appliance and Equipment Testing: Can be used to check home appliances, devices, and machinery for proper functionality. Safety Guidelines: Always ensure that the multimeter is set to the correct function before taking measurements. Do not exceed the meter’s rated voltage (typically CAT III 600V) to avoid potential hazards. Ensure the leads are securely connected to the meter before performing measurements. Summary: The Proskit MT-1508 Pocket Autorange Multimeter is a compact, versatile, and reliable tool designed for a wide range of electrical measurement tasks. With its auto-ranging feature, wide measurement range, low power consumption, and compact design, it is ideal for both professionals and DIY users who need an easy-to-use, portable multimeter for daily electrical testing and troubleshooting. Whether you're testing voltage, current, resistance, or diodes, the MT-1508 offers accurate results with safety features that make it suitable for a variety of applications.

he Proskit MT-1506 Pocket True-RMS Auto Range Multimeter is a compact, portable, and feature-rich digital multimeter designed for accurate electrical measurements in various applications. Its compact size, combined with True-RMS capabilities and auto-ranging functions, makes it an excellent tool for professionals and DIY enthusiasts alike. Below is a detailed description of its features and specifications: Key Features: True RMS Measurement: The Proskit MT-1506 is equipped with True RMS (Root Mean Square) measurement technology, which provides accurate readings for both sinusoidal and non-sinusoidal waveforms. This is especially important for accurately measuring power in modern electronic devices and equipment with distorted waveforms, such as inverters, UPS systems, and variable speed drives. Auto-Ranging Function: The meter features auto-ranging, meaning it automatically selects the correct measurement range based on the value being tested. This feature makes it easy to use, as you don't need to manually adjust the range for different measurements, ensuring both convenience and accuracy. Compact and Portable Design: As a pocket-sized multimeter, the MT-1506 is extremely compact and portable, making it convenient for fieldwork, on-site diagnostics, or carrying in a toolbox. Its small size does not compromise its functionality, providing professional-grade performance in a lightweight package. Wide Measurement Range: The Proskit MT-1506 is capable of measuring a broad range of electrical parameters, including: AC and DC Voltage: Measures voltages with a wide range, from millivolts (mV) to several hundred volts (V). AC and DC Current: Measures current, typically from microamperes (µA) to several amperes (A), allowing for testing in various applications such as electronics, appliances, and circuits. Resistance: Measures resistance in circuits, allowing users to check for continuity or test components like resistors, capacitors, or diodes. Diode and Continuity Testing: Includes diode testing and continuity checking with an audible beep when continuity is detected, which helps with quick circuit diagnostics. Large LCD Display: Despite its small size, the MT-1506 features a large LCD display, making it easy to read measurements clearly, even in dimly lit environments. Some models may include a backlight for visibility in low-light conditions, improving readability in a variety of settings. Data Hold Function: The Data Hold function allows the user to freeze the reading on the display, which is helpful when taking measurements in hard-to-reach places or when you need to record a reading without holding the meter in place. Low Power Consumption: The meter is designed with low power consumption, which extends battery life, making it ideal for prolonged use without the need to frequently change batteries. Safety Features: The MT-1506 is built with safety in mind, featuring overload protection and CAT III 600V safety rating, which allows it to safely measure electrical parameters in circuits up to 600V, making it suitable for use in residential and industrial applications. It also typically includes fuse protection to prevent damage to the meter in case of accidental overcurrent. Battery Powered: The multimeter operates on standard battery power, which ensures portability and ease of use in locations without direct access to external power sources. Multifunction Rotary Switch: The meter is equipped with a multifunction rotary switch that allows you to easily select the measurement type, range, and mode (voltage, current, resistance, etc.). The intuitive design of the switch makes it simple to navigate between settings quickly. Applications: Electrical Troubleshooting: Ideal for professionals and hobbyists diagnosing electrical problems in residential, commercial, and industrial settings. HVAC Systems: Great for measuring electrical parameters in heating, ventilation, and air conditioning systems. Automotive: Used for testing and troubleshooting electrical components in cars, trucks, and other vehicles. Home Appliances: Useful for checking the performance and safety of home appliances and electronics. DIY Projects: A handy tool for hobbyists and DIY enthusiasts working with electronics and electrical circuits. Safety Guidelines: Always ensure the multimeter is set to the correct mode before taking measurements to prevent damage to the device. Ensure that the meter is rated for the voltage and current levels being tested. Use the meter in accordance with its safety ratings (such as CAT III 600V) to avoid electrical hazards. Summary: The Proskit MT-1506 Pocket True-RMS Auto Range Multimeter is an excellent choice for those looking for a compact, reliable, and easy-to-use multimeter. With its True RMS capability, auto-ranging, broad measurement range, and safety features, it provides accurate readings for a wide variety of electrical testing tasks. Its pocket-sized design makes it highly portable, while its intuitive interface and display ensure users can quickly and easily perform measurements, making it an indispensable tool for both professionals and hobbyists.

Kraftform Kompakt Micro set for precision mechanical work. Suitable for the take-up of bits with 4 mm halfmoon drive (Wera series 9) and bits with 4 mm HIOS drive (Wera series 21). Electrical surface resistance of ≤ 109 Ohm for secure protection against electrostatic charge. Manufactured in accordance with DIN EN 61340-5-1. Compact handle/interchangeable blade system for fast blade change. Kaftform Micro handle with twist cap and free-turning zone for rapid twisting, making any time-consuming repositioning of the fingers unnecessary. Power zone with integrated soft zones for the transfer of higher tightening and loosening torque. Precision zone directly above the blade for the right angle for adjustment work. Bits for manual as well as power tool operations. Rapid fixing of the bit: just push the bit into the insert for automatic locking and a secure fit. To change the bit, simply push the sleeve forward and remove. Free-turning sleeve for simple guidance of the tool during the screwdriving process. Bit holder suitable for the take-up of bits with 4 mm halfmoon or HIOS drive Handle out of material with a surface resistance of ≤ 109 Ohm Handle/Interchangeable blade system for rapid exchange of the blade Kraftform Micro handle with rotating cap for rapid spinning Bits for manual as well as power tool operations Kraftform Micro ESD bit holder Wera ESD Tools The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. High protection The electric surface resistance of the Wera ESD material is ≤ 109 ohm. This securely protects components against electrostatic energy and associated damage. For Halfmoon and HIOS Bits Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. Kraftform Micro handle Multi-component screwdriver handle for ergonomic working. The precision zone The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. Rotating cap and fast-turning zone The fast-turning zone just below the rotating cap allow rapid twisting. This makes time-consuming grip adjustments as with other conventional precision screwdrivers unnecessary. Kraftform Kompakt Micro 20 ESD 1, 20 pieces contents: 1013 Kraftform Micro ESD Bitholding screwdriver 05300004001 1 x 97 mm 851/9 C J PH bits, halfmoon 05135270001 1x PH 00 x 44 x 1.8 mm 1) 05135272001 1x PH 0 x 44 x 1.8 mm 2) 05135276001 1x PH 1 x 44 x 3 mm 1) 867/9 C TORX® bits, halfmoon 05135220001 1x TX 1 x 44 mm 05135221001 1x TX 2 x 44 mm 05135222001 1x TX 3 x 44 mm 05345352001 1x TX 4 x 44 mm 05345351001 1x TX 5 x 44 mm 05345350001 1x TX 6 x 44 mm 867/9 C IP TORX PLUS® bits 05135230001 1x 1 IP x 44 mm 05135231001 1x 2 IP x 44 mm 05135232001 1x 3 IP x 44 mm 05326310001 1x 4 IP x 44 mm 840/9 C bits Hex-Plus 05135268001 1x 1.5 x 44 mm 05135269001 1x 2 x 44 mm 800/9 C bits 05135265001 1x 0.23 x 1.5 x 44 mm 05135266001 1x 0.40 x 2 x 44 mm 05135267001 1x 0.50 x 3 x 44 mm 867/9 IPR TORX PLUS® bits 1x 1 IPR x 44x1.8 mm

Kraftform Kompakt Micro set for precision mechanical work. Suitable for the take-up of bits with 4 mm halfmoon drive (Wera series 9) and bits with 4 mm HIOS drive (Wera series 21). Electrical surface resistance of ≤ 109 Ohm for secure protection against electrostatic charge. Manufactured in accordance with DIN EN 61340-5-1. Compact handle/interchangeable blade system for fast blade change. Kaftform Micro handle with twist cap and free-turning zone for rapid twisting, making any time-consuming repositioning of the fingers unnecessary. Power zone with integrated soft zones for the transfer of higher tightening and loosening torque. Precision zone directly above the blade for the right angle for adjustment work. Bits for manual as well as power tool operations. Rapid fixing of the bit: just push the bit into the insert for automatic locking and a secure fit. To change the bit, simply push the sleeve forward and remove. Free-turning sleeve for simple guidance of the tool during the screwdriving process. ESD-safe tool thanks to surface resistance of ≤ 109 Ohm Kraftform Micro ESD bit holder Holder with anti-roll feature, rotating cap and quick-release chuck Bit holder suitable for the take-up of bits with 4 mm halfmoon or HIOS drive In a practical pouch Wera ESD Tools The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. High protection The electric surface resistance of the Wera ESD material is ≤ 109 ohm. This securely protects components against electrostatic energy and associated damage. For Halfmoon and HIOS Bits Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. Kraftform Micro handle Multi-component screwdriver handle for ergonomic working. The precision zone The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. Rotating cap and fast-turning zone The fast-turning zone just below the rotating cap allow rapid twisting. This makes time-consuming grip adjustments as with other conventional precision screwdrivers unnecessary. 05135973001 1013 Kraftform Micro ESD Bitholding screwdriver 05300004001 1x 97 mm 851/9 C J PH bits, halfmoon 05134605001 1x PH 000 x 44 x 1.5 mm 05135270001 1x PH 00 x 44 x 1.8 mm 05135272001 1x PH 0 x 44 x 1.8 mm 867/9 C TORX® bits, halfmoon 05135220001 1x TX 1 x 44 mm 05135221001 1x TX 2 x 44 mm 05135222001 1x TX 3 x 44 mm 05345352001 1x TX 4 x 44 mm 05345351001 1x TX 5 x 44 mm 867/9 C IP TORX PLUS® bits 05135230001 1x 1 IP x 44 mm 05135231001 1x 2 IP x 44 mm 05135232001 1x 3 IP x 44 mm 05326310001 1x 4 IP x 44 mm 867/9 IPR TORX PLUS® bits 1x 1 IPR x 44x1.5 mm 872/9 bits for Microstix® screws 05066850001 1x m x 44 mm 05066851001 1x 00 x 44 mm 05066852001 1x F x 44 mm 05066853001 1x 0 x 44 mm 800/9 C bits 05135265001 1x 0.23 x 1.5 x 44 mm 05135264001 1x 0.35 x 2.5 x 44 mm 869/9 Nutsetters 05135224001 1x 2.5 x 44 mm

Torque tool with adjustable torque of 2.0 to 6.0 cNm (accuracy ± 10%). Compact handle/interchangeable blade system for torque controlled precision screwdriving. The Kraftform Micro ESD torque screwdriver is ideal for torque controlled jobs on electrostatically-susceptible components. Suitable for the take-up of bits with 4 mm halfmoon drive (Wera series 9) and 4 mm HIOS drive (Wera series 21). Tamperproof. Distinct audible and perceivable excess load signal when the pre-set torque value is reached. Unlimited manual loosening torque. Electrical surface resistance of ≤ 109 Ohm for secure protection against electrostatic charge. Manufactured in accordance with DIN EN 61340-5-1. Handle/Interchangeable blade system for rapid blade change. Kaftform Micro handle with twist cap and free-turning zone for rapid twisting, making any time-consuming repositioning of the fingers unnecessary. Power zone with integrated soft zones for the transfer of higher tightening and loosening torque. Precision zone directly above the blade for the right angle for adjustment work. Rapid fixing of the bit: just push the bit into the insert for automatic locking and a secure fit. To change the bit, simply push the sleeve forward and remove. Free-turning sleeve for simple guidance of the tool during the screwdriving process. Bits suitable for manual as well as power tool operations with electric screwdrivers (e.g. HIOS, Delvo, Sehan). Applications for example on smartphones, cell phones, cameras, electrical appliances, in dental labs and dental surgeries. Code art. no. Nm Nm mm inch 05074802001 1430 ESD 0.02-0.06 0.02-0.06 141 5 7/16" Adjustable Kraftform Micro ESD torque screwdriver with quick-release chuck ESD-safe tool thanks to surface resistance of ≤ 109 Ohm Distinct audible and perceivable excess load signal when the pre-set torque value is reached Suitable for bits with 4 mm halfmoon and 4 mm HIOS drive Applications e.g. on smartphones, mobile phones, cameras, electronic equipment Adjustable torque screwdrivers They can be adjusted by hand to the corresponding scale value. Also available in ESD version (also with take-up for HIOS/Halfmoon bits) and with Kraftform Micro handle. Wera ESD Tools The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. High protection The electric surface resistance of the Wera ESD material is ≤ 109 ohm. This securely protects components against electrostatic energy and associated damage. For Halfmoon and HIOS Bits Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. Adjustable Torque Screwdrivers Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. Attachable magnifying glass Articles 1430 ESD and 1431 ESD, all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. The fast-turning zone The fast-turning zone just below the rotating cap allows rapid spinning. The power zone The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw.

Overview Bit holder with Rapidaptor quick-release chuck for bits with 1/4“ hexagon drive Multi-component Kraftform handle for fast and ergonomic screwdriving Hexagonal anti-roll feature against rolling away Rapidaptor technology for rapid change of the bits or blades Retractable bayonet blade High quality bit holder. The telescopic bayonet blade, which can be lowered into the handle, together with the quick-release chuck allows fast manual work even in confined installation situations. The Rapidaptor quick-release chuck enables rapid bit change without needing any special tools. The strong permanent magnet holds the bits absolutely securely. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Suitable for bits with ¼” hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). The telescopic blade I When the unique telescopic blade is lowered into the handle, fast, easy screw-driving action is possible, even in the tightest spots! The telescopic blade II By pushing the clamping sleeve, the telescopic blade can be extended out of the handle and the compact tool becomes a full-sized screwdriver. The telescopic blade III If the clamping sleeve is pushed again the telescopic blade can be taken out of the handle, and be used as a machine bit adaptor. Rapid-in and self-lock The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Rapid-out Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Chuck-all The Rapidaptor quick-release chucks hold ¼“ DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. Rapid-spin The free-turning sleeve allows screw steadying at the start of the screwdriving process. This makes it easier to apply the tool to the screw and prevents slipping. It can also be used as a short extension for ¼” applications e.g. in combination with the Wera Zyklop Ratchets. Kraftform The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either.

Torque tool with adjustable torque of 2.0 to 6.0 cNm (accuracy ± 10%). Compact handle/interchangeable blade system for torque controlled precision screwdriving. The Kraftform Micro ESD torque screwdriver is ideal for torque controlled jobs on electrostatically-susceptible components. Suitable for the take-up of bits with 4 mm halfmoon drive (Wera series 9) and 4 mm HIOS drive (Wera series 21). Tamperproof. Distinct audible and perceivable excess load signal when the pre-set torque value is reached. Unlimited manual loosening torque. Electrical surface resistance of ≤ 109 Ohm for secure protection against electrostatic charge. Manufactured in accordance with DIN EN 61340-5-1. Handle/Interchangeable blade system for rapid blade change. Kaftform Micro handle with twist cap and free-turning zone for rapid twisting, making any time-consuming repositioning of the fingers unnecessary. Power zone with integrated soft zones for the transfer of higher tightening and loosening torque. Precision zone directly above the blade for the right angle for adjustment work. Rapid fixing of the bit: just push the bit into the insert for automatic locking and a secure fit. To change the bit, simply push the sleeve forward and remove. Free-turning sleeve for simple guidance of the tool during the screwdriving process. Bits suitable for manual as well as power tool operations with electric screwdrivers (e.g. HIOS, Delvo, Sehan). Applications for example on smartphones, cell phones, cameras, electrical appliances, in dental labs and dental surgeries. Adjustable Kraftform Micro ESD torque screwdriver with quick-release chuck ESD-safe tool thanks to surface resistance of ≤ 109 Ohm Distinct audible and perceivable excess load signal when the pre-set torque value is reached Suitable for bits with 4 mm halfmoon and 4 mm HIOS drive Applications e.g. on smartphones, mobile phones, cameras, electronic equipment Code art. no. Nm Nm mm inch 05074804001 1431 ESD 0.05-0.11 0.005 141 5 7/16" Adjustable torque screwdrivers They can be adjusted by hand to the corresponding scale value. Also available in ESD version (also with take-up for HIOS/Halfmoon bits) and with Kraftform Micro handle. Wera ESD Tools The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. High protection The electric surface resistance of the Wera ESD material is ≤ 109 ohm. This securely protects components against electrostatic energy and associated damage. For Halfmoon and HIOS Bits Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. Adjustable Torque Screwdrivers Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. Attachable magnifying glass Articles 1430 ESD and 1431 ESD, all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. The fast-turning zone The fast-turning zone just below the rotating cap allows rapid spinning. The power zone The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw.

Article description Wera compact tools enable the simultaneous use for the two types of fastening “manual” and “power tool”. The handle/interchangeable system in a compact design with various blade tips in a minimum of space make the user mobile and flexible. Suitable for bits with 1/4“ hexagon head drive as per DIN ISO 1173-C 6.3 und E 6.3 (ISO 1173) and Wera connecting series 1 and 4. Comes with an extension, bayonet, Rapidaptor technology. Kraftform handle with non-roll feature, multi-component for particularly ergonomic screwdriving. Integrated magazine for the storage of the bits. In this way, this set replaces a 6-piece screwdriver set and reduces the equipment required to a minimum. The profile and size of the bits are easy to recognise thanks to the Wera Take it easy Tool Finder with its colour coding and clearly visible imprint. Kraftform holder with bayonet blade and Rapidaptor quick-release chuck Kraftform handle with anti-roll feature, multi-component and integrated magazine Retractable bayonet blade Take it easy tool finder: colour coding according to profile and size In robust pouch 05051016001 889/4 R Rapidaptor Universal Bit Holder 05052504001 1x 1/4” x 100 mm 851/1 BTZ bits 05056420001 1x PH 1 x 25 mm 05056422001 1x PH 2 x 25 mm 855/1 BTZ bits 05056720001 1x PZ 1 x 25 mm 05056722001 1x PZ 2 x 25 mm 867/1 BTZ TORX bits 05066126001 1x TX 25 x 25 mm 800/1 BTZ bits 05056064001 1x 0.8 x 5.5 x 25 mm Hook and Loop Fastener Strip 70 1x 50x70 mm Why is the right tool so often not at hand? The reason: too many tools and overly-heavy tool bags can make it bothersome to carry them onsite. So for us it was a clear challenge: to design a tool that is suitable for a whole host of applications and can be easily taken along to jobs at other sites. Our solution: Kraftform Kompakt tools. A handle into which blades with a range of different profiles can be inserted. Compactly and protectively housed in a light and robust textile pouch or plastic box. Telescopic blade, integrated bit magazine, Rapidaptor technology The sets in the series Kraftform Kompakt 20 are really something. A 2 position telescopic blade can be retracted into the handle for confined space operation or extended for more reach. It can also be removed and used as a 100 mm bit holder in the power tool. Six bits are conveniently integrated into a push-button opening bit magazine. The Rapidaptor technology ensures rapid one hand bit changes, press-in auto bit lock and a secure positioning when used in power tools thanks to the free-turning sleeve. Handle/interchangeable blade system The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The telescopic blade I When the unique telescopic blade is lowered into the handle, fast, easy screw-driving action is possible, even in the tightest spots! The telescopic blade II By pushing the clamping sleeve, the telescopic blade can be extended out of the handle and the compact tool becomes a full-sized screwdriver. The telescopic blade III If the clamping sleeve is pushed again the telescopic blade can be taken out of the handle, and be used as a machine bit adaptor. Bits with Take it easy tool finder Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Prevents hand injuries The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses.

Article description Wera compact tools enable the simultaneous use for the two types of fastening “manual” and “power tool”. The handle/interchangeable system in a compact design with various blade tips in a minimum of space make the user mobile and flexible. Suitable for bits with 1/4“ hexagon head drive as per DIN ISO 1173-C 6.3 und E 6.3 (ISO 1173) and Wera connecting series 1 and 4. Comes with an extension, bayonet, Rapidaptor technology. Kraftform handle with non-roll feature, multi-component for particularly ergonomic screwdriving. Integrated magazine for the storage of the bits. In this way, this set replaces a 6-piece screwdriver set and reduces the equipment required to a minimum. The profile and size of the bits are easy to recognise thanks to the Wera Take it easy Tool Finder with its colour coding and clearly visible imprint. Kraftform holder with bayonet blade and Rapidaptor quick-release chuck Kraftform handle with anti-roll feature, multi-component and integrated magazine Retractable bayonet blade Take it easy tool finder: colour coding according to profile and size In robust pouch 05051016001 889/4 R Rapidaptor Universal Bit Holder 05052504001 1x 1/4” x 100 mm 851/1 BTZ bits 05056420001 1x PH 1 x 25 mm 05056422001 1x PH 2 x 25 mm 855/1 BTZ bits 05056720001 1x PZ 1 x 25 mm 05056722001 1x PZ 2 x 25 mm 867/1 BTZ TORX bits 05066126001 1x TX 25 x 25 mm 800/1 BTZ bits 05056064001 1x 0.8 x 5.5 x 25 mm Hook and Loop Fastener Strip 70 1x 50x70 mm Why is the right tool so often not at hand? The reason: too many tools and overly-heavy tool bags can make it bothersome to carry them onsite. So for us it was a clear challenge: to design a tool that is suitable for a whole host of applications and can be easily taken along to jobs at other sites. Our solution: Kraftform Kompakt tools. A handle into which blades with a range of different profiles can be inserted. Compactly and protectively housed in a light and robust textile pouch or plastic box. Telescopic blade, integrated bit magazine, Rapidaptor technology The sets in the series Kraftform Kompakt 20 are really something. A 2 position telescopic blade can be retracted into the handle for confined space operation or extended for more reach. It can also be removed and used as a 100 mm bit holder in the power tool. Six bits are conveniently integrated into a push-button opening bit magazine. The Rapidaptor technology ensures rapid one hand bit changes, press-in auto bit lock and a secure positioning when used in power tools thanks to the free-turning sleeve. Handle/interchangeable blade system The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The telescopic blade I When the unique telescopic blade is lowered into the handle, fast, easy screw-driving action is possible, even in the tightest spots! The telescopic blade II By pushing the clamping sleeve, the telescopic blade can be extended out of the handle and the compact tool becomes a full-sized screwdriver. The telescopic blade III If the clamping sleeve is pushed again the telescopic blade can be taken out of the handle, and be used as a machine bit adaptor. Bits with Take it easy tool finder Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Prevents hand injuries The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses.