The Proskit MT-7063 PoE & LAN Cable Tester is a versatile and essential tool designed for testing Ethernet cables (LAN) as well as Power over Ethernet (PoE) cables. This tool is invaluable for network professionals, electricians, and technicians who need to verify the performance and integrity of Ethernet cables, especially in environments where PoE technology is used to supply power to devices over a single Ethernet cable. Key Features: PoE (Power over Ethernet) Testing: The MT-7063 can test Power over Ethernet (PoE) cables to determine whether PoE power is being transmitted through the cable. This is crucial for verifying installations of devices that rely on PoE, such as IP cameras, VoIP phones, wireless access points, and other network devices that require both power and data through the same cable. The tester can detect whether PoE voltage is present, allowing users to verify that the cables are correctly providing power to connected devices. LAN Cable Testing: The tester is designed to test standard Ethernet cables (including Cat 5, Cat 5e, Cat 6, and Cat 6a), ensuring proper wiring and functionality. It checks whether the cables are wired correctly according to the T568A or T568B wiring standards. This is important for ensuring that network cables are wired in the correct sequence for optimal data transmission. Wiremap (Wiring Integrity): The MT-7063 is equipped with the ability to check the wiremap of the Ethernet cable. This includes verifying that all wires are properly connected, in the correct order, and ensuring there are no open circuits or short circuits. If any wiring issues are found, the tester will indicate the specific problem using LED lights. LED Indicators: The tester uses LED lights to show the status of each individual wire within the Ethernet cable. If the cable is wired correctly, green LEDs light up for each corresponding wire. If there is a problem (e.g., miswiring, open circuit, or short circuit), the relevant LED will light red or will be inactive, alerting the user to the specific issue. Short Circuit and Open Circuit Detection: The MT-7063 detects both short circuits and open circuits in Ethernet cables. A short circuit happens when two wires are mistakenly connected, while an open circuit occurs when a wire is not connected at all. Identifying these issues is crucial for ensuring that the cable will function properly in a network. Remote Unit for Long Cable Testing: The tester includes a remote unit, allowing for testing of long cables without having to have both ends near the main tester. This is particularly useful when testing cables that are already installed or are difficult to access fully. The remote unit is often designed for easy plug-in and quick testing. Clear LCD Display: The tester features a clear LCD display that provides visual feedback on whether the Ethernet cable is wired correctly and whether PoE power is detected. This display helps users interpret test results quickly and accurately. Compact and Portable Design: The Proskit MT-7063 is compact and lightweight, making it portable and easy to carry around for fieldwork. Its small size ensures that it can easily fit into a toolbag or be carried around on-site for easy access and use. Battery-Powered: The tester is powered by standard batteries, which ensures portability and ease of use in locations without access to an external power source. Its low power consumption helps extend battery life, making it ideal for frequent testing. Durability: Built with durability in mind, the MT-7063 is designed to withstand regular use in rugged environments, providing reliability for technicians who work in different locations or on different types of network setups. Easy to Use: The Proskit MT-7063 is designed to be simple to operate. You just need to plug one end of the Ethernet cable into the tester and the other end into the remote unit (if applicable). The tester will quickly display the results on the screen or via LED indicators. Applications: PoE Verification: Ideal for checking whether Power over Ethernet (PoE) is being properly supplied through Ethernet cables to power devices like IP cameras, wireless access points, and phones. Cable Troubleshooting: Useful for identifying wiring issues in Ethernet cables, such as miswiring, open circuits, shorts, or incorrect configurations. Network Installations: Perfect for verifying the integrity of Ethernet cables during the installation of networking equipment and ensuring that the wiring standards (T568A/B) are followed. IT Professionals: A must-have for IT technicians who are involved in the setup, maintenance, and troubleshooting of network systems. Home and Office Networking: Great for testing Ethernet and PoE cables in small-to-medium office or home network installations. Field Testing: Compact and easy to carry, it is an ideal tool for field technicians who need to perform quick tests on network cables during installations or maintenance. Summary: The Proskit MT-7063 PoE & LAN Cable Tester is a highly functional, easy-to-use tool designed for testing Ethernet cables and Power over Ethernet (PoE) cables. With its PoE detection, wiremap checking, short and open circuit detection, and clear LCD display, this tester provides reliable performance for professionals working with network cables. Its compact size, remote testing functionality, and LED indicators make it a versatile tool for field use and quick diagnostics in a wide range of network-related tasks. Whether you are installing, maintaining, or troubleshooting Ethernet and PoE cables, the MT-7063 offers the features necessary to ensure your network is performing optimally. You said: Proskit MT-7029 Noise-Filtering NetworkPoE Toner & Probe ChatGPT said: ChatGPT The Proskit MT-7029 Noise-Filtering Network PoE Toner & Probe is a specialized tool designed for testing and troubleshooting network cables, including those used for Power over Ethernet (PoE) systems. This toner and probe kit is an essential tool for network professionals, electricians, and IT technicians, especially when dealing with cable identification and PoE-enabled devices in complex network environments. Key Features: Noise-Filtering Capability: One of the standout features of the Proskit MT-7029 is its noise-filtering functionality. This allows the toner and probe to detect and trace network cables even in environments with high levels of electrical noise or interference. It ensures that the signals being transmitted by the toner are clear and precise, making it easier to identify cables and troubleshoot network issues. PoE Detection: The MT-7029 is specifically designed to work with Power over Ethernet (PoE) cables. It can detect whether PoE voltage is present on the cable, allowing users to confirm that both power and data are being transmitted through a single Ethernet cable. This is particularly important for installations involving PoE-powered devices like IP cameras, VoIP phones, and wireless access points. By verifying the presence of PoE power, users can quickly determine whether a cable is capable of powering devices in addition to transmitting data. Toner and Probe Design: The toner is the active part of the tool that sends a signal through the network cable, allowing the user to trace its path. The probe detects the signal emitted by the toner and produces an audible tone, allowing the technician to locate the cable without needing to access both ends of the wire. The signal strength and clarity of the tone help guide the user to the correct cable, ensuring efficient and accurate cable identification. Cable Tracing: This tool is ideal for cable tracing, allowing technicians to trace cables even when they are bundled together or hidden behind walls, ceilings, or other obstacles. The noise-filtering ability ensures that the signal can be detected and traced clearly, without interference from other nearby cables or electrical systems. Clear Audio Tone: The probe produces a clear, audible tone that indicates the presence of the toner’s signal in the cable. The volume of the tone can often be adjusted, making it easier to identify the cable's location even in noisy environments. A louder tone indicates that the probe is closer to the signal source, helping users pinpoint the cable. Multiple Applications: Cable Identification: The MT-7029 can be used to identify the specific path of individual cables in a network setup, making it useful for labeling or troubleshooting. PoE Troubleshooting: It helps verify that cables in PoE installations are delivering the proper power and are correctly wired, ensuring that PoE-powered devices will function properly. Network Maintenance: The tool is helpful for network administrators and technicians who need to troubleshoot or modify network wiring, whether in commercial or residential settings. Field Use: Due to its portability and easy-to-use design, the MT-7029 is a perfect tool for field technicians working in different locations, especially for large network installations where finding and diagnosing cable problems can be time-consuming. Adjustable Sensitivity: The probe comes with adjustable sensitivity settings, allowing users to fine-tune the device for more precise cable identification. This is particularly useful in large installations or dense cable environments, where other cables might interfere with the signal. Ergonomic Design: Both the toner and probe are designed for ergonomics, making them easy to handle and use for extended periods. The user-friendly interface and design ensure minimal fatigue during use, which is especially important during long troubleshooting sessions. Durable Construction: The MT-7029 is built to withstand the rigors of daily use in professional settings. Its durable casing protects the internal electronics from damage, ensuring a long service life even under tough working conditions. Battery-Powered: The toner and probe are powered by standard batteries, ensuring portability and easy use in locations where external power sources may not be readily available. Applications: PoE Network Installations: Ideal for testing and troubleshooting PoE cables, ensuring that both power and data are transmitted properly to connected devices. Cable Tracing in Complex Installations: Useful for tracing and identifying network cables in environments where multiple cables are bundled together, in cabinets, or behind walls. Network Troubleshooting: Essential for identifying faulty cables, determining the correct path for cable connections, and verifying proper PoE power delivery in network setups. Field Work: Compact and portable, this tool is an excellent choice for field technicians working in various locations to diagnose and resolve network cable issues. Infrastructure Maintenance: Perfect for technicians maintaining or upgrading network infrastructures in commercial and residential buildings, helping them identify the correct cables without making unnecessary disconnections. Summary: The Proskit MT-7029 Noise-Filtering Network PoE Toner & Probe is a highly effective tool designed for cable tracing and PoE testing. With its noise-filtering capabilities, PoE voltage detection, and adjustable sensitivity, it provides accurate and clear results for network professionals working with Ethernet and PoE systems. The ergonomic design, battery-powered convenience, and clear audio signals make it a reliable choice for field technicians and IT professionals looking to troubleshoot, identify, and verify network cables in diverse environments. Whether for PoE verification, cable tracing, or network maintenance, the Proskit MT-7029 is an essential tool for ensuring the functionality and integrity of network installations.

9 Wera bits. 1 holder 813 R Kraftform with Rapidaptor quick-release chuck, multi-component for high working speeds and particularly ergonomic screwdriving. A screwdriver set cannot be more compact Kraftform holder with Rapidaptor quick-release chuck Torsion design of the bits against premature wear Tough viscous bits for universal use Convenient and robust storage Why is the right tool so often not at hand? The reason: too many tools and overly-heavy tool bags can make it bothersome to carry them onsite. So for us it was a clear challenge: to design a tool that is suitable for a whole host of applications and can be easily taken along to jobs at other sites. Our solution: Kraftform Kompakt tools. A handle into which blades with a range of different profiles can be inserted. Compactly and protectively housed in a light and robust textile pouch or plastic box. Handle/interchangeable blade system The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Manual and power tool operations The sets come with a Kraftform handle, quick-release chuck and bits for manual and power tool operations. Rapidaptor holder Rapid bit change without needing any additional tools. One-hand operation with a freely spinning sleeve for simplified guidance of the tool. Kraftform The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Prevents hand injuries The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. Storage and transport In a robust storage box. Kraftform Kompakt 10, 12 Set contents: 813 R 05051272001 1 x 1/4" x 90 mm 851/1 J 05135040001 1 x PH 00 x 25 x 2 mm 05135041001 1 x PH 0 x 25 x 2,5 mm 05135042001 1 x PH 1 x 25 x 3 mm 851/1 TZ PH 05056510001 1 x PH 2 x 25 mm 867/1 TZ TORX® 05066301001 1 x TX 6 x 25 mm 05066300001 1 x TX 5 x 25 mm 05066302001 1 x TX 7 x 25 mm 05066303001 1 x TX 8 x 25 mm 05066304001 1 x TX 9 x 25 mm

Connector from square head to hexagonal. For 1/4“ hexagon bits as per DIN ISO 1173-C 6.3 and E 6.3 and Wera connection series 1 and 4. With quick-release chuck. Code inch inch mm 05003529001 1/4” 1/4“ 37.0 1/4” Zyklop adaptor with quick-release chuck for rapid bit change Suitable for 1/4" hex bits (Wera connecting series 1 and 4) Chrome vanadium steel Due to the ever-more confined working environment, space is becoming more and more an issue for the application of ratchets. Our product developers therefore intensively occupied themselves with the issue of confined working spaces, and Wera has now solved this problem. The extremely slim and robust Zyklop Metal ratchet with a long lever was what emerged. When the change in direction needs to be quick, the Zyklop Metal Switch ratchet is the right tool. When the socket must not get lost and a coincidental change of direction has to be avoided at all cost, the Zyklop Metal Push is the correct choice.

Overview Bit holder with Rapidaptor quick-release chuck for bits with 1/4“ hexagon drive Multi-component Kraftform handle for fast and ergonomic screwdriving Hexagonal anti-roll feature against rolling away Rapidaptor technology for rapid change of the bits or blades Retractable bayonet blade High quality bit holder. The telescopic bayonet blade, which can be lowered into the handle, together with the quick-release chuck allows fast manual work even in confined installation situations. The Rapidaptor quick-release chuck enables rapid bit change without needing any special tools. The strong permanent magnet holds the bits absolutely securely. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Suitable for bits with ¼” hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). The telescopic blade I When the unique telescopic blade is lowered into the handle, fast, easy screw-driving action is possible, even in the tightest spots! The telescopic blade II By pushing the clamping sleeve, the telescopic blade can be extended out of the handle and the compact tool becomes a full-sized screwdriver. The telescopic blade III If the clamping sleeve is pushed again the telescopic blade can be taken out of the handle, and be used as a machine bit adaptor. Rapid-in and self-lock The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Rapid-out Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Chuck-all The Rapidaptor quick-release chucks hold ¼“ DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. Rapid-spin The free-turning sleeve allows screw steadying at the start of the screwdriving process. This makes it easier to apply the tool to the screw and prevents slipping. It can also be used as a short extension for ¼” applications e.g. in combination with the Wera Zyklop Ratchets. Kraftform The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either.

Premium Wera Micro insert wrench for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro nutsetter for hex head screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Anti-roll feature and rotating cap for rapid twisting E.g. for electricians, opticians, precision mechanics, jewellers or IT hardware fitters Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Kraftform Micro handle Multi-component screwdriver handle for ergonomic working. The refined screwdriver for electronics technicians The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone The fast-turning zone just below the rotating cap allows rapid spinning. Take it easy Tool Finder Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Applications Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fitters and model-makers Code mm inch mm mm mm inch 05118110001 2.0 - 60 97 5.7 2 3/8“ 05118112001 2.5 - 60 97 5.7 2 3/8” 05118114001 3.0 - 60 97 5.7 2 3/8“ 05118116001 3.2 - 60 97 5.7 2 3/8” 05118118001 3.5 - 60 97 5.7 2 3/8“ 05118122001 4.5 - 60 97 6.4 2 3/8” 05118124001 5.0 - 60 97 7.0 2 3/8“ 05345281001 6.0 - 60 97 8.5 2 3/8” 05118108001 1.5 - 60 97 5.7 2 3/8“ 05118109001 1.8 - 60 97 5.7 2 3/8”

A screwdriver set cannot be more compact Kraftform holder with Rapidaptor quick-release chuck Torsion design of the bits against premature wear Tough viscous bits for universal use Convenient and robust storage 9 tough viscous Wera bits for universal use. Torsion design to combat remature wear. 1 holder 813 R Kraftform with Rapidaptor quickrelease chuck; multi-component for high working speeds and particularly ergonomic screwdriving. Set contents: 813 R: 05051272001 : 1 x 1/4 x 90 mm 851/1 TZ PH: 05056505001 : 1 x PH 1 x 25 mm 05056510001 : 1 x PH 2 x 25 mm 855/1 TZ PZ: 05056810001 : 1 x PZ 1 x 25 mm 05056815001 : 1 x PZ 2 x 25 mm 867/1 TZ TORX®: 05066305001 : 1 x TX 10 x 25 mm 05066308001 : 1 x TX 15 x 25 mm 05066310001 : 1 x TX 20 x 25 mm 800/1 TZ: 05056203001 : 1 x 0.5 x 4 x 25 mm 05056225001 : 1 x 1 x 5.5 x 25 mm Why is the right tool so often not at hand? The reason: too many tools and overly-heavy tool bags can make it bothersome to carry them onsite. So for us it was a clear challenge: to design a tool that is suitable for a whole host of applications and can be easily taken along to jobs at other sites. Our solution: Kraftform Kompakt tools. A handle into which blades with a range of different profiles can be inserted. Compactly and protectively housed in a light and robust textile pouch or plastic box. Handle/interchangeable blade system: The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Manual and power tool operations: The sets come with a Kraftform handle, quick-release chuck and bits for manual and power tool operations. Rapidaptor holder: Rapid bit change without needing any additional tools. One-hand operation with a freely spinning sleeve for simplified guidance of the tool. Kraftform: The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Prevents hand injuries: The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. Storage and transport: In a robust storage box.

Article description Premium Kraftform Plus screwdriver with electrician's blade. Multi-component Kraftform Plus handle for comfortable ergonomic screwdriving, which avoids blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface “bites” into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Code mm mm mm mm mm inch inch Blade thickness Blade Width Blade Length Handle Length Blade Diameter Blade Width Blade Length 05008061001 1.2 6.0 100 105 6.0 15/64“ 4” Slotted screwdriver -electrician's blade Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. Lasertip prevents slipping out It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally “bites” itself firmly into the screw head. Slipping out becomes a thing of the past. Lasertip A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip “bites” itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Reduced contact pressure Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Take it easy Tool Finder Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Kraftform The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Prevents hand injuries The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. Rapid hand repositioning The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin “sticking” to the handle. The surrounding hard zones with large diameters glide like wheels through the hand.

Article description Premium Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and gentle work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Screwdriver for recessed TORX screws Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away The Wera Black Point tip offers an exact fit and optimum corrosion protection Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. Kraftform The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Rapid hand repositioning The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin “sticking” to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Large contact area The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. Non-roll feature The hexagonal non-roll feature prevents any rolling away at the workplace. Identification marking The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. Wera Black Point tip The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Code mm mm mm inch 05028000001 TX 5 60 70 3.5 2 3/8“ 05028001001 TX 6 60 70 3.5 2 3/8” 05028002001 TX 7 60 70 3.5 2 3/8“ 05028003001 TX 8 60 81 3.5 2 3/8” 05028005001 TX 10 80 81 4.0 3 1/8“ 05028010001 TX 20 100 98 4.5 4”

Article description ESD-safe Wera tool. 16 bits. Includes 2 816 R ESD holders, multi-component for high working speeds and particularly ergonomic screwdriving. Dependable protection against electrostatic energy and associated damage. Compact set that enables both manual as well as power tool operations. Simple sorting according to profile and size, easy bit removal and reinsertion; with belt clip, 18-piece. Suitable for manual and power tool operations Smooth hard zones for high-speed turning, soft grip zones for high torque transfer Rapidaptor quick-release chuck tough viscous bits for universal use In robust pouch Wera ESD Tools The Requirements for ESD-safe Screwdriver are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined Conductive material. the wera product in the ESD Series satisfy these standards and the even more stringent requirements demanded by some technology companies. Kraftform The Basic idea for the prototype of the kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. in cooperation with the internationally recognised Fraunhofer IAO institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the wera kraftform handle was launched to the market in 1968. it has been optimised through the year with new technologies, but has kept its proven shape. After all, the human hand has not changed either.