The Proskit MT-7031 Mini LAN Cable Tester is a compact, portable device designed to quickly and accurately test Ethernet cables (LAN cables) to ensure they are wired correctly and functioning properly. This tool is essential for anyone working with network setups, such as IT professionals, electricians, or technicians. It allows users to verify cable integrity, check wiring configurations, and troubleshoot connection issues in a variety of networking environments. Key Features: Compact and Portable Design: The Proskit MT-7031 is designed to be small and lightweight, making it highly portable and easy to carry around for on-the-go testing. It’s ideal for use in tight spaces or when conducting fieldwork, ensuring ease of transport in toolkits or pockets. Ethernet Cable Testing: The MT-7031 is specifically designed to test Ethernet cables, including Cat 5, Cat 5e, Cat 6, and other similar LAN cables. It ensures the cable is wired according to the correct standard, such as T568A or T568B, and can detect common wiring issues. Testing for Correct Wiring: The device checks the wiring sequence of the cable to ensure that all wires are correctly connected. This helps identify if there are issues with the wiring, such as incorrect pinouts or open circuits, which could lead to network connection problems. The tester indicates whether the cable is properly wired for straight-through or crossover configuration. LED Indicators: The tester features LED indicators that visually display the wiring status of each individual wire inside the Ethernet cable. The lights show whether the cable is properly wired, helping users to quickly diagnose problems. Green lights usually indicate correct wiring. Red lights or no lights may indicate miswiring or open connections, signaling where the issue lies. Short Circuit and Open Circuit Detection: The Proskit MT-7031 can detect short circuits and open circuits within the cable, which is vital for ensuring a reliable network connection. If any wire is not connected or is incorrectly wired, the tester will indicate the specific problem. Simple and Easy to Use: The tester is straightforward to use, requiring no special knowledge or complex settings. Simply plug one end of the LAN cable into the main tester and the other end into the remote unit (which may be a detachable unit in some models). The tester will then provide instant feedback on the status of the cable. Remote Unit (Optional): In some versions of the MT-7031, the tester may include a remote unit that allows you to test cables without needing both ends to be near the main tester. This is useful when testing long cables or in large installations where the two ends of the cable are far apart. Battery-Powered: The Proskit MT-7031 operates on standard battery power, ensuring portability and ease of use in locations where a power source may not be readily available. It’s designed to conserve power, extending battery life during testing. Wide Application: This tester is ideal for a variety of environments, including: Network Installations: Ensuring proper wiring of Ethernet cables in network infrastructure. Home and Office Networking: Verifying LAN cables for proper connection in homes, offices, or small businesses. Troubleshooting: Helping network administrators and technicians quickly diagnose and repair faulty cables. IT Support: Ensuring that cables are correctly wired during computer or equipment setup. Durable Construction: The tester is built with durability in mind, designed to withstand the wear and tear of regular use in professional environments. The small yet sturdy casing protects the internal components from damage during transport or in rugged conditions. Applications: Network Testing: Ideal for verifying the functionality of LAN cables before installation or during troubleshooting. Installation: Useful for testing and certifying new Ethernet cables during network setup or maintenance. Field Use: A compact, portable solution for IT professionals, allowing them to test cables in various settings, such as data centers, offices, or homes. Cable Diagnostics: Quickly diagnosing issues with existing cables, such as miswiring, shorts, or open circuits, saving time in repairs. Summary: The Proskit MT-7031 Mini LAN Cable Tester is a compact, reliable, and easy-to-use tool designed to test Ethernet cables for correct wiring and functionality. With LED indicators for each wire, the ability to detect short and open circuits, and simple operation, it’s an essential tool for professionals who need to verify LAN cable integrity. Its portable design makes it an excellent choice for technicians working in the field or on-site installations, ensuring that Ethernet cables are properly configured for optimal network performance.

The Proskit MT-1708 3-5/6 Smart Digital Multimeter is a highly advanced and versatile digital multimeter, designed for precise electrical measurements in various applications. With its 3-5/6 digit display, smart functionality, and wide measurement range, this multimeter is well-suited for professional electricians, technicians, and hobbyists alike. Below is a detailed description of its key features and specifications: Key Features: High-Resolution 3-5/6 Digit Display: The Proskit MT-1708 features a 3-5/6 digit display, offering a maximum reading of 59999 counts. This high resolution allows for precise measurements, especially when working with small or fine variations in voltage, current, or resistance. The display ensures accurate readings for both high and low values, making the multimeter ideal for detailed diagnostics. Smart Digital Functionality: The MT-1708 incorporates smart digital features, such as auto-ranging, which automatically adjusts the meter’s range based on the measurement being taken. This simplifies the operation for users, eliminating the need for manual range selection and making it easier to work with circuits of varying sizes and types. Wide Measurement Range: The multimeter can measure a wide range of electrical parameters, including: AC/DC Voltage: It measures both AC and DC voltages, typically from millivolts (mV) up to several hundred volts (V), suitable for testing everything from low-power circuits to higher-voltage systems. AC/DC Current: The MT-1708 can measure both AC and DC currents, ranging from microamperes (µA) to several amperes (A), enabling it to be used in a wide array of applications. Resistance: Measures resistance in ohms (Ω), which is essential for detecting short circuits, checking continuity, and testing components like resistors and capacitors. Capacitance: Can also measure capacitance, useful for testing capacitors in electronics and other systems. Frequency: It supports frequency measurement, allowing users to test the frequency of signals in AC circuits. Diode and Continuity Testing: Includes features for checking diodes and performing continuity tests, with an audible beep when continuity is detected, helping to quickly diagnose open or short circuits. True RMS Measurement: The MT-1708 supports True RMS (Root Mean Square) measurement, which ensures accurate readings even for non-sinusoidal waveforms. This is particularly important when measuring AC voltage or current in devices that generate distorted waveforms, such as variable speed drives or switching power supplies. Large Backlit LCD Display: The multimeter is equipped with a large LCD display that is both clear and easy to read. The backlit display ensures visibility in low-light conditions, making it easier to take measurements in dark or confined spaces. Data Hold Function: The Data Hold feature allows users to freeze the reading on the display, which is useful when you need to record the value or inspect it more closely without having to keep the multimeter in place. Auto Power Off: The MT-1708 includes an auto power off function that helps conserve battery life by automatically turning off the meter after a period of inactivity. This feature is especially useful for prolonging the battery life during long work sessions. Low Battery Indicator: A low battery indicator lets the user know when the battery power is running low, ensuring you are not caught without power in the middle of an important measurement. Overload Protection: The MT-1708 is designed with overload protection, preventing the meter from being damaged when measuring beyond its rated capacity. This ensures durability and safety during use. Compact and Durable Design: Despite its advanced features, the MT-1708 has a compact and durable design that is easy to handle and carry, making it a portable solution for on-site measurements. Multifunction Rotary Switch: The meter is equipped with a rotary switch for easy selection of different functions, allowing users to quickly switch between measurements like voltage, current, resistance, and capacitance. Applications: Electrical Troubleshooting: Ideal for troubleshooting electrical systems in both residential and industrial environments. Electronic Repairs: Perfect for testing circuits, components, and electronic devices, including capacitors, resistors, and semiconductors. Automotive Applications: Useful for diagnosing electrical issues in vehicles, including checking battery voltage, current, and the integrity of automotive wiring. HVAC Systems: Can be used to measure the electrical parameters in heating, ventilation, and air conditioning systems, ensuring the proper operation of motors and other components. DIY Projects: A great tool for electronics enthusiasts, hobbyists, and DIYers who need accurate measurements for various electrical projects. Safety Features: CAT III 600V Rating: The Proskit MT-1708 is rated for CAT III 600V, meaning it is safe for use in environments where voltages up to 600V are present, including residential and industrial settings. Fused Protection: The meter includes internal fuses to protect against overloads and short circuits. Summary: The Proskit MT-1708 3-5/6 Smart Digital Multimeter is an advanced, high-performance multimeter that combines a high-resolution display, True RMS measurement, smart features, and safety protections. With its wide range of measurements (voltage, current, resistance, capacitance, frequency), auto-ranging capabilities, and user-friendly design, it’s perfect for professionals and hobbyists needing precise, reliable measurements for electrical troubleshooting, maintenance, and repairs. Its compact size, clear backlit display, and protective features make it a versatile and essential tool for a variety of electrical applications.

The Proskit PM-905FHC Diagonal Cutting Plier is a high-quality cutting tool designed for precision cutting of wires and cables. It is widely used by professionals in various industries, including electronics, telecommunications, and electrical work. The plier features a compact, ergonomic design and is ideal for cutting through soft to medium-hard wires and materials. Key Features and Components: Diagonal Cutting Design: The diagonal cutting design (or "flush cutting") of the Proskit PM-905FHC ensures that the tool cuts wire at an angle, providing a clean and smooth cut. This design helps reduce the risk of wire fraying and ensures precision when trimming cables and wires. Sharp, Hardened Cutting Edges: The cutting edges are made from hardened carbon steel, which provides superior strength and durability. This ensures that the tool can withstand frequent use without losing its cutting ability, even when cutting through tougher materials. The sharp edges ensure precise cuts and minimize the effort needed to cut through wires. Ergonomic Handle: The plier is designed with ergonomically shaped handles that provide a comfortable grip, reducing hand strain during extended use. The handles are typically made of non-slip material, ensuring better control and safety while using the tool. The handles are also designed to absorb some of the pressure, making the tool easier to use for longer periods. Versatile Cutting Capabilities: The Proskit PM-905FHC is suitable for cutting various materials, including electrical wires, cables, and small gauge wires. It is particularly effective for soft to medium-hard wires such as copper and aluminum, but may not be ideal for harder, thicker materials like steel wires. Compact and Lightweight: The compact size of the plier makes it highly maneuverable in tight spaces. Its lightweight construction ensures ease of handling, making it a great tool for intricate work where precision is crucial. Professional Grade: This tool is intended for professional use, offering long-lasting performance and high-quality cuts. It's a reliable option for electricians, technicians, engineers, and hobbyists working with wiring and other materials. Applications: Electrical Work: Ideal for cutting electrical wires and cables during installations and repairs. Telecommunications: Useful for cutting wires in telecommunication systems. DIY and Hobbies: Suitable for various crafts, model building, and DIY projects that require precise cutting of small wires. In Summary: The Proskit PM-905FHC Diagonal Cutting Plier is a precision cutting tool that combines durability, comfort, and high performance. With its sharp, hardened cutting edges and ergonomic handles, it provides clean and efficient cuts for various wire types, making it an essential tool for professionals in the electrical, telecommunications, and electronics industries. Its compact design and reliable performance also make it a great choice for DIYers and hobbyists.

The 16PCS Standard Combination Wrench Set (1/4" to 1-1/4") is a comprehensive tool set designed for general-purpose use, providing versatility for a wide range of mechanical and repair tasks. Here are the key features of this set: 1. Range of Sizes: This set includes wrenches ranging from 1/4" to 1-1/4", allowing you to handle both small and large fasteners with ease. The wide range of sizes makes it suitable for various applications, from automotive repairs to general mechanical work. 2. Combination Design: Each wrench in the set features a combination design, with an open-end on one side and a box-end on the other. This gives you flexibility to tackle a variety of fasteners and allows for different grip positions and torque applications. 3. High-Quality Material: The wrenches are typically made from chrome vanadium steel or chrome-molybdenum steel, which provides excellent strength, durability, and resistance to wear. The material ensures the wrenches last longer, even under heavy use. 4. Chrome Finish: The wrenches usually have a chrome-plated finish, which enhances their resistance to rust, corrosion, and abrasion. The shiny finish also makes the tools easier to clean after use. 5. Precise Fit: The box-end of each wrench typically features a 12-point design, offering a better grip on fasteners and reducing the chance of slipping or rounding. This provides a precise and secure fit, which is especially important for high-torque applications. 6. Ergonomic Handle: The wrenches are designed for comfortable use, with an ergonomic handle that helps reduce hand fatigue during prolonged tasks. 7. Durability: Built to withstand heavy use, these wrenches are ideal for both professional mechanics and DIY enthusiasts. The set can handle a wide range of tasks, from routine maintenance to more demanding repair jobs. 8. Storage and Organization: Typically, the wrenches come with a storage rack or pouch, allowing for easy organization and accessibility. This is particularly useful for keeping tools neatly arranged in a workshop or toolbox. 9. Versatility: This wrench set is versatile enough for use in various industries, including automotive, construction, and general maintenance. It’s great for working with plumbing, bicycles, machinery, and more. In Summary: The 16PCS Standard Combination Wrench Set (1/4" to 1-1/4") offers a broad selection of sizes, durable construction, and ergonomic design, making it an essential tool set for anyone needing reliable, high-quality wrenches for a variety of tasks. Whether you're a professional mechanic or a DIY enthusiast, this set is a valuable addition to your toolkit.

The Toptul DT-030S2 Digital Torque Wrench is a precision tool designed for accurately measuring torque when fastening bolts and nuts. Here are its key features and descriptions: 1. Digital Display: The DT-030S2 features a large, easy-to-read digital LCD display, allowing the user to see the torque value in real-time. The display is typically backlit, which helps when working in low-light conditions. 2. High Accuracy: This torque wrench provides high accuracy with torque measurement, making it ideal for tasks that require precise torque control, such as automotive repairs, machinery assembly, and industrial applications. 3. Measurement Units: The wrench is versatile, allowing users to switch between various torque units such as Newton-meters (Nm), foot-pounds (ft-lb), and kilogram-force meters (kgf·m), offering flexibility for different preferences or requirements. 4. Audible and Visual Alerts: It comes equipped with audible beeps and a visual indication (such as a flashing light or display change) that alerts users when the desired torque value is reached. This feature helps ensure that the user doesn't over-tighten or under-tighten fasteners. 5. Wide Torque Range: The torque wrench has a broad measurement range, typically from 2 to 200 Nm or a similar range, which allows it to be used for a variety of applications, from low to high torque needs. 6. Ergonomic Design: The wrench is designed with ergonomics in mind, providing a comfortable grip that reduces hand strain during prolonged use. The handle is often made from durable, non-slip materials to ensure a firm grip. 7. Precise Calibration: The digital torque wrench offers precise calibration, ensuring consistent performance and accurate readings over time. Calibration is often adjustable, allowing the user to reset the tool for high-accuracy readings. 8. Memory Function: Some models may feature a memory function that stores the last few torque measurements, enabling users to reference previous readings when performing repetitive tasks or for quality control purposes. 9. Auto Power-Off: The tool often includes an automatic power-off function to preserve battery life when not in use. This feature ensures that the battery lasts longer, reducing the need for frequent battery changes. 10. Versatility: The Toptul DT-030S2 is suitable for a variety of applications, including automotive maintenance, industrial machinery, construction, and home repairs. It is ideal for use in both professional and DIY settings where precision and accuracy are crucial. In summary, the Toptul DT-030S2 Digital Torque Wrench is a highly accurate and versatile tool designed for precise torque measurements, making it perfect for a wide range of applications where torque control is essential.

The Milwaukee M12 FDD2 Fuel Drill Driver is a compact and powerful tool designed for various drilling and driving applications, offering a balance of performance, durability, and ease of use. Here's a breakdown of its key features and descriptions: Key Features: Powerful Performance: The M12 FDD2 is equipped with a Brushless Motor that delivers high torque and long motor life. The motor provides up to 350 in-lbs of torque, making it ideal for both heavy-duty drilling and driving tasks. Compact and Lightweight: Weighing just 2.3 lbs with the battery installed, the drill is highly portable and ideal for working in tight spaces. The compact design allows for easy maneuverability in confined areas, making it a great choice for overhead or precision work. Two Speed Settings: The drill offers 2-speed settings (0-450 RPM and 0-1,800 RPM), providing versatility for a variety of applications. The lower speed is ideal for controlled driving, while the higher speed is perfect for drilling through wood, metal, or other materials. Redlink Plus Intelligence: This system provides advanced overload protection, preventing the tool and battery from being damaged. RedLink Plus also optimizes the tool’s performance to deliver efficient power and extend the tool’s overall lifespan. Ergonomic Design: The drill features an ergonomic handle that enhances comfort during use, reducing fatigue during extended work periods. Battery and Charger: The M12 FDD2 is part of Milwaukee's M12 Fuel System, powered by 12V lithium-ion batteries. These batteries offer extended runtime and faster charging times with Milwaukee’s RedLithium technology. It is compatible with other tools in the M12 lineup. Chuck and Drilling Capabilities: It features a 1/2-inch all-metal ratcheting chuck that ensures a secure grip on the drill bit, providing greater durability and preventing bit slippage during use. LED Light: Integrated LED lighting illuminates the work surface, improving visibility in dimly lit areas, making it easier to work in confined or low-light spaces. Ideal Use Cases: Woodworking: Perfect for drilling pilot holes, driving screws, or assembling furniture. Construction: Handy for light to medium drilling and fastening tasks on a job site. Maintenance and Repair: Ideal for home or vehicle repairs, where precise control and compact size are necessary. Electrical: The M12 FDD2 can be used for drilling through drywall or soft metals during electrical installations. Summary: The Milwaukee M12 FDD2 Fuel Drill Driver is a robust, high-performance tool designed for professionals and DIYers who need a reliable drill that combines power, portability, and versatility. Its brushless motor, multiple speed settings, and ergonomic design make it suitable for a variety of applications, from general drilling to precision tasks

The Proskit MT-7063 PoE & LAN Cable Tester is a versatile and essential tool designed for testing Ethernet cables (LAN) as well as Power over Ethernet (PoE) cables. This tool is invaluable for network professionals, electricians, and technicians who need to verify the performance and integrity of Ethernet cables, especially in environments where PoE technology is used to supply power to devices over a single Ethernet cable. Key Features: PoE (Power over Ethernet) Testing: The MT-7063 can test Power over Ethernet (PoE) cables to determine whether PoE power is being transmitted through the cable. This is crucial for verifying installations of devices that rely on PoE, such as IP cameras, VoIP phones, wireless access points, and other network devices that require both power and data through the same cable. The tester can detect whether PoE voltage is present, allowing users to verify that the cables are correctly providing power to connected devices. LAN Cable Testing: The tester is designed to test standard Ethernet cables (including Cat 5, Cat 5e, Cat 6, and Cat 6a), ensuring proper wiring and functionality. It checks whether the cables are wired correctly according to the T568A or T568B wiring standards. This is important for ensuring that network cables are wired in the correct sequence for optimal data transmission. Wiremap (Wiring Integrity): The MT-7063 is equipped with the ability to check the wiremap of the Ethernet cable. This includes verifying that all wires are properly connected, in the correct order, and ensuring there are no open circuits or short circuits. If any wiring issues are found, the tester will indicate the specific problem using LED lights. LED Indicators: The tester uses LED lights to show the status of each individual wire within the Ethernet cable. If the cable is wired correctly, green LEDs light up for each corresponding wire. If there is a problem (e.g., miswiring, open circuit, or short circuit), the relevant LED will light red or will be inactive, alerting the user to the specific issue. Short Circuit and Open Circuit Detection: The MT-7063 detects both short circuits and open circuits in Ethernet cables. A short circuit happens when two wires are mistakenly connected, while an open circuit occurs when a wire is not connected at all. Identifying these issues is crucial for ensuring that the cable will function properly in a network. Remote Unit for Long Cable Testing: The tester includes a remote unit, allowing for testing of long cables without having to have both ends near the main tester. This is particularly useful when testing cables that are already installed or are difficult to access fully. The remote unit is often designed for easy plug-in and quick testing. Clear LCD Display: The tester features a clear LCD display that provides visual feedback on whether the Ethernet cable is wired correctly and whether PoE power is detected. This display helps users interpret test results quickly and accurately. Compact and Portable Design: The Proskit MT-7063 is compact and lightweight, making it portable and easy to carry around for fieldwork. Its small size ensures that it can easily fit into a toolbag or be carried around on-site for easy access and use. Battery-Powered: The tester is powered by standard batteries, which ensures portability and ease of use in locations without access to an external power source. Its low power consumption helps extend battery life, making it ideal for frequent testing. Durability: Built with durability in mind, the MT-7063 is designed to withstand regular use in rugged environments, providing reliability for technicians who work in different locations or on different types of network setups. Easy to Use: The Proskit MT-7063 is designed to be simple to operate. You just need to plug one end of the Ethernet cable into the tester and the other end into the remote unit (if applicable). The tester will quickly display the results on the screen or via LED indicators. Applications: PoE Verification: Ideal for checking whether Power over Ethernet (PoE) is being properly supplied through Ethernet cables to power devices like IP cameras, wireless access points, and phones. Cable Troubleshooting: Useful for identifying wiring issues in Ethernet cables, such as miswiring, open circuits, shorts, or incorrect configurations. Network Installations: Perfect for verifying the integrity of Ethernet cables during the installation of networking equipment and ensuring that the wiring standards (T568A/B) are followed. IT Professionals: A must-have for IT technicians who are involved in the setup, maintenance, and troubleshooting of network systems. Home and Office Networking: Great for testing Ethernet and PoE cables in small-to-medium office or home network installations. Field Testing: Compact and easy to carry, it is an ideal tool for field technicians who need to perform quick tests on network cables during installations or maintenance. Summary: The Proskit MT-7063 PoE & LAN Cable Tester is a highly functional, easy-to-use tool designed for testing Ethernet cables and Power over Ethernet (PoE) cables. With its PoE detection, wiremap checking, short and open circuit detection, and clear LCD display, this tester provides reliable performance for professionals working with network cables. Its compact size, remote testing functionality, and LED indicators make it a versatile tool for field use and quick diagnostics in a wide range of network-related tasks. Whether you are installing, maintaining, or troubleshooting Ethernet and PoE cables, the MT-7063 offers the features necessary to ensure your network is performing optimally. You said: Proskit MT-7029 Noise-Filtering NetworkPoE Toner & Probe ChatGPT said: ChatGPT The Proskit MT-7029 Noise-Filtering Network PoE Toner & Probe is a specialized tool designed for testing and troubleshooting network cables, including those used for Power over Ethernet (PoE) systems. This toner and probe kit is an essential tool for network professionals, electricians, and IT technicians, especially when dealing with cable identification and PoE-enabled devices in complex network environments. Key Features: Noise-Filtering Capability: One of the standout features of the Proskit MT-7029 is its noise-filtering functionality. This allows the toner and probe to detect and trace network cables even in environments with high levels of electrical noise or interference. It ensures that the signals being transmitted by the toner are clear and precise, making it easier to identify cables and troubleshoot network issues. PoE Detection: The MT-7029 is specifically designed to work with Power over Ethernet (PoE) cables. It can detect whether PoE voltage is present on the cable, allowing users to confirm that both power and data are being transmitted through a single Ethernet cable. This is particularly important for installations involving PoE-powered devices like IP cameras, VoIP phones, and wireless access points. By verifying the presence of PoE power, users can quickly determine whether a cable is capable of powering devices in addition to transmitting data. Toner and Probe Design: The toner is the active part of the tool that sends a signal through the network cable, allowing the user to trace its path. The probe detects the signal emitted by the toner and produces an audible tone, allowing the technician to locate the cable without needing to access both ends of the wire. The signal strength and clarity of the tone help guide the user to the correct cable, ensuring efficient and accurate cable identification. Cable Tracing: This tool is ideal for cable tracing, allowing technicians to trace cables even when they are bundled together or hidden behind walls, ceilings, or other obstacles. The noise-filtering ability ensures that the signal can be detected and traced clearly, without interference from other nearby cables or electrical systems. Clear Audio Tone: The probe produces a clear, audible tone that indicates the presence of the toner’s signal in the cable. The volume of the tone can often be adjusted, making it easier to identify the cable's location even in noisy environments. A louder tone indicates that the probe is closer to the signal source, helping users pinpoint the cable. Multiple Applications: Cable Identification: The MT-7029 can be used to identify the specific path of individual cables in a network setup, making it useful for labeling or troubleshooting. PoE Troubleshooting: It helps verify that cables in PoE installations are delivering the proper power and are correctly wired, ensuring that PoE-powered devices will function properly. Network Maintenance: The tool is helpful for network administrators and technicians who need to troubleshoot or modify network wiring, whether in commercial or residential settings. Field Use: Due to its portability and easy-to-use design, the MT-7029 is a perfect tool for field technicians working in different locations, especially for large network installations where finding and diagnosing cable problems can be time-consuming. Adjustable Sensitivity: The probe comes with adjustable sensitivity settings, allowing users to fine-tune the device for more precise cable identification. This is particularly useful in large installations or dense cable environments, where other cables might interfere with the signal. Ergonomic Design: Both the toner and probe are designed for ergonomics, making them easy to handle and use for extended periods. The user-friendly interface and design ensure minimal fatigue during use, which is especially important during long troubleshooting sessions. Durable Construction: The MT-7029 is built to withstand the rigors of daily use in professional settings. Its durable casing protects the internal electronics from damage, ensuring a long service life even under tough working conditions. Battery-Powered: The toner and probe are powered by standard batteries, ensuring portability and easy use in locations where external power sources may not be readily available. Applications: PoE Network Installations: Ideal for testing and troubleshooting PoE cables, ensuring that both power and data are transmitted properly to connected devices. Cable Tracing in Complex Installations: Useful for tracing and identifying network cables in environments where multiple cables are bundled together, in cabinets, or behind walls. Network Troubleshooting: Essential for identifying faulty cables, determining the correct path for cable connections, and verifying proper PoE power delivery in network setups. Field Work: Compact and portable, this tool is an excellent choice for field technicians working in various locations to diagnose and resolve network cable issues. Infrastructure Maintenance: Perfect for technicians maintaining or upgrading network infrastructures in commercial and residential buildings, helping them identify the correct cables without making unnecessary disconnections. Summary: The Proskit MT-7029 Noise-Filtering Network PoE Toner & Probe is a highly effective tool designed for cable tracing and PoE testing. With its noise-filtering capabilities, PoE voltage detection, and adjustable sensitivity, it provides accurate and clear results for network professionals working with Ethernet and PoE systems. The ergonomic design, battery-powered convenience, and clear audio signals make it a reliable choice for field technicians and IT professionals looking to troubleshoot, identify, and verify network cables in diverse environments. Whether for PoE verification, cable tracing, or network maintenance, the Proskit MT-7029 is an essential tool for ensuring the functionality and integrity of network installations.

The Proskit MT-7063 PoE & LAN Cable Tester is a versatile and essential tool designed for testing Ethernet cables (LAN) as well as Power over Ethernet (PoE) cables. This tool is invaluable for network professionals, electricians, and technicians who need to verify the performance and integrity of Ethernet cables, especially in environments where PoE technology is used to supply power to devices over a single Ethernet cable. Key Features: PoE (Power over Ethernet) Testing: The MT-7063 can test Power over Ethernet (PoE) cables to determine whether PoE power is being transmitted through the cable. This is crucial for verifying installations of devices that rely on PoE, such as IP cameras, VoIP phones, wireless access points, and other network devices that require both power and data through the same cable. The tester can detect whether PoE voltage is present, allowing users to verify that the cables are correctly providing power to connected devices. LAN Cable Testing: The tester is designed to test standard Ethernet cables (including Cat 5, Cat 5e, Cat 6, and Cat 6a), ensuring proper wiring and functionality. It checks whether the cables are wired correctly according to the T568A or T568B wiring standards. This is important for ensuring that network cables are wired in the correct sequence for optimal data transmission. Wiremap (Wiring Integrity): The MT-7063 is equipped with the ability to check the wiremap of the Ethernet cable. This includes verifying that all wires are properly connected, in the correct order, and ensuring there are no open circuits or short circuits. If any wiring issues are found, the tester will indicate the specific problem using LED lights. LED Indicators: The tester uses LED lights to show the status of each individual wire within the Ethernet cable. If the cable is wired correctly, green LEDs light up for each corresponding wire. If there is a problem (e.g., miswiring, open circuit, or short circuit), the relevant LED will light red or will be inactive, alerting the user to the specific issue. Short Circuit and Open Circuit Detection: The MT-7063 detects both short circuits and open circuits in Ethernet cables. A short circuit happens when two wires are mistakenly connected, while an open circuit occurs when a wire is not connected at all. Identifying these issues is crucial for ensuring that the cable will function properly in a network. Remote Unit for Long Cable Testing: The tester includes a remote unit, allowing for testing of long cables without having to have both ends near the main tester. This is particularly useful when testing cables that are already installed or are difficult to access fully. The remote unit is often designed for easy plug-in and quick testing. Clear LCD Display: The tester features a clear LCD display that provides visual feedback on whether the Ethernet cable is wired correctly and whether PoE power is detected. This display helps users interpret test results quickly and accurately. Compact and Portable Design: The Proskit MT-7063 is compact and lightweight, making it portable and easy to carry around for fieldwork. Its small size ensures that it can easily fit into a toolbag or be carried around on-site for easy access and use. Battery-Powered: The tester is powered by standard batteries, which ensures portability and ease of use in locations without access to an external power source. Its low power consumption helps extend battery life, making it ideal for frequent testing. Durability: Built with durability in mind, the MT-7063 is designed to withstand regular use in rugged environments, providing reliability for technicians who work in different locations or on different types of network setups. Easy to Use: The Proskit MT-7063 is designed to be simple to operate. You just need to plug one end of the Ethernet cable into the tester and the other end into the remote unit (if applicable). The tester will quickly display the results on the screen or via LED indicators. Applications: PoE Verification: Ideal for checking whether Power over Ethernet (PoE) is being properly supplied through Ethernet cables to power devices like IP cameras, wireless access points, and phones. Cable Troubleshooting: Useful for identifying wiring issues in Ethernet cables, such as miswiring, open circuits, shorts, or incorrect configurations. Network Installations: Perfect for verifying the integrity of Ethernet cables during the installation of networking equipment and ensuring that the wiring standards (T568A/B) are followed. IT Professionals: A must-have for IT technicians who are involved in the setup, maintenance, and troubleshooting of network systems. Home and Office Networking: Great for testing Ethernet and PoE cables in small-to-medium office or home network installations. Field Testing: Compact and easy to carry, it is an ideal tool for field technicians who need to perform quick tests on network cables during installations or maintenance. Summary: The Proskit MT-7063 PoE & LAN Cable Tester is a highly functional, easy-to-use tool designed for testing Ethernet cables and Power over Ethernet (PoE) cables. With its PoE detection, wiremap checking, short and open circuit detection, and clear LCD display, this tester provides reliable performance for professionals working with network cables. Its compact size, remote testing functionality, and LED indicators make it a versatile tool for field use and quick diagnostics in a wide range of network-related tasks. Whether you are installing, maintaining, or troubleshooting Ethernet and PoE cables, the MT-7063 offers the features necessary to ensure your network is performing optimally.

The Proskit MT-7064 PoE & LAN Cable Tester is an advanced, multifunctional cable tester designed for testing Ethernet (LAN) cables as well as Power over Ethernet (PoE) cables. It is an essential tool for network professionals, electricians, and technicians who need to verify the integrity and performance of network cables, especially in environments where PoE technology is used for powering devices like IP cameras, wireless access points, and VoIP phones. Key Features: PoE (Power over Ethernet) Testing: The PoE testing capability is one of the standout features of the Proskit MT-7064. It can detect whether Power over Ethernet (PoE) is present on a cable, which is essential for troubleshooting and verifying installations where both power and data are transmitted through a single Ethernet cable. The tester can check if the cable is capable of delivering power (i.e., whether PoE voltage is present), ensuring that devices powered by PoE will receive adequate voltage and current for proper operation. LAN Cable Testing: The MT-7064 tests standard Ethernet cables (such as Cat 5, Cat 5e, Cat 6, and Cat 6a) for correct wiring. It helps identify any issues in the wiring configuration, such as incorrect pinouts, miswiring, shorts, and open circuits. The tester checks the cable for proper wiring configurations, including T568A and T568B standards. LED Indicators for Cable Status: The tester is equipped with LED indicators that display the status of each individual wire in the Ethernet cable. Green LEDs typically indicate correct wiring, while red LEDs or a lack of illumination signal issues like miswiring or open circuits. This provides users with clear visual feedback, helping them pinpoint exactly where problems exist in the cable. Multifunctional Testing Capabilities: In addition to basic cable testing, the MT-7064 is capable of more advanced testing, such as detecting: PoE Voltage and Power: Checking whether PoE voltage is being supplied to the cable. Data Transmission Integrity: Verifying that the Ethernet cable supports proper data transmission and that no wires are missing or incorrectly connected. Short Circuits and Open Circuits: The tester identifies short circuits and open circuits in the cable, helping to quickly troubleshoot faulty connections. Correct Cable Configuration: Verifies the correctness of the cable configuration (T568A/B) for network standards. Remote Testing: The MT-7064 comes with a remote unit, which allows users to test long cables without needing to have both ends near the main tester. This remote unit is particularly useful in large installations or when cables are already deployed and connected. Compact and Easy-to-Use Design: The compact size and ergonomic design of the Proskit MT-7064 make it highly portable and easy to handle. Its simple layout ensures that users can easily navigate through the various testing modes with minimal setup. It’s designed for fast, on-the-go testing, ideal for technicians who need to test multiple cables during a workday. LCD Display: The tester features a clear LCD display that provides visual feedback on the PoE voltage and cable testing results. It allows the user to see information such as whether the cable is functioning properly, whether PoE power is present, and any errors in wiring configuration. Battery-Powered: The tester is powered by standard batteries, making it portable and suitable for field use where power sources may not be readily available. It is designed for low power consumption to maximize battery life during long testing sessions. Durability: The MT-7064 is built with durable materials to withstand the wear and tear of regular field use. It is compact yet sturdy, making it a reliable tool for technicians working in different environments. Overload Protection: The tester is designed with overload protection to safeguard against damage in case of incorrect usage or testing beyond the recommended limits. Applications: Network Installations: Ensures that Ethernet and PoE cables are correctly wired and capable of delivering both data and power for devices. Troubleshooting: Ideal for diagnosing issues with Ethernet cables, identifying faulty cables or incorrect wiring configurations, and checking for PoE power delivery. IT and Telecommunications: Essential for network technicians and IT professionals setting up or maintaining networks, especially those that rely on PoE for powering devices like security cameras or access points. Home and Office Networking: Useful for home and office network installations, where both data and power need to be transmitted through a single cable. Field Testing: Perfect for on-site testing and troubleshooting of pre-installed cables or cables in large, complex networks. Summary: The Proskit MT-7064 PoE & LAN Cable Tester is a versatile, multifunctional tool designed to test both Ethernet cables and Power over Ethernet (PoE) cables. With its PoE voltage detection, cable wiring verification, and ability to identify shorts and open circuits, it’s a must-have tool for anyone working with network cables. The compact design, remote testing capability, and LCD display ensure ease of use and portability, making it an ideal choice for network professionals, electricians, and technicians. Whether you are installing new network equipment or troubleshooting existing cables, the MT-7064 helps ensure that your Ethernet and PoE cables are correctly wired and ready for optimal performance.