The ultra compact and lightweight bike tools with two quadruple bits and three tyre levers. Four different screw profiles can be operated with just one bit. Significant weight savings of over 50 %. The enormous space savings make the Bicycle Set 15 perfect for mobile use. The operability of the large profiles is made possible by the spring compression of the small tips. The bit with a 1/4“ hexagon drive (Wera connection series 1) can also be used with e.g. bit ratchets and bitholding screwdrivers with Rapidaptor. The 9504 tyre lever has a 1/4” mounting for using a 1/4“ bit. When both 9504 tyre levers are stacked together, a 4-in-1 bit can be inserted and you get a screwdriving tool. The 9505 tyre lever serves as both valve ejector and bleeder valve. The levers and 4-in-1 bits can be clipped together, so that everything is compact and nothing will be lost. Innovative, extremely compact quadruple bit – only one bit for four different screw sizes Super space- saving solution, ideal for mobile use Compact, secure and very simple retainer in the wera tyre levers The hexagon mounting of the tyre lever allows a torque of up to 10 Nm Significant weight savings and better overview of the tools when on tour Innovative, extremely compact quadruple bit – only one bit for four different screw sizes Safely lever the tyres off of the rim With the glass fibre reinforce plastic tyre levers, the tyres can be safely levered of the rim without damaging the rim. Lift off of the rim with one tyre lever, hook into a spoke and pull off the tyre with the second tyre lever. The tow tyre levers can be clicked together and are therefore not lost individually. The 9504-tyre lever with bit mounting The 1/4” Hexagon mounting in the 9504-tyre lever can mount one ¼” bit, allowing for easy connections. The 9505 tyre jack The 9505 tyre lever can be used as a valve ejector for French valves (Sclaverand) and as a bleeder for car valves. The Wera 4-in-1 bits Four screw sizes can be operated with the 4-in-1 bits 9506 and 9507. The 4-in-1 bit 9506 for four sizes of hexagonal socket screws (3.0; 4.0; 5.0; 6.0), the 4-in-1 bit 9507 for three sizes of hexagonal socket screws (2.5; 5.0; 6.0) and one size of TORX® screws (TX 25). In order to use the larger profile, continuously press against the spring tension while screwdriving so that the smaller profile is countersunk and the larger profile can be used. Tyre jack plus bit = screwdriving tool When the tyre levers 9504 are stacked together, the 4-in-1 bits can be inserted in the 1/4” holder and you get a screwdriving tool.

Ratchets and screws in a Kraftform Kompakt format. These drop-forged, full-steel ratchets, Zyklop Mini 1 and 2, combine filigree design with incredible robustness. For particularly rapid screwdriving in confined working situations. Zyklop Mini 1 or Zyklop Mini 2 can be used whenever screwdriving with power tools or conventional hand tools is unfeasible for lack of space. 1 bit ratchet Zyklop Mini 1; suitable for the take-up of bits with ¼“ hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 and Wera connecting series 1 and 4; also possible to use ¼” sockets by attaching the Wera adaptor 870/1. 1 socket ratchet Zyklop Mini 2; suitable for the direct attachment of Wera Zyklop special sockets 8790 FA. Drop-forged, full-steel ratchet design For screwdriving in very confined working situations Zyklop sockets 8790 FA for direct insertion in the Zyklop Mini 2 Bit holder, 9 sockets, 14 bits and 1 adaptor In robust textile box The Zyklop Mini Ratchets For all difficult-to-access applications. The Zyklop Mini The fine tooth mechanism, with its 60 teeth, allows a small return angle of only 6° - ideal for precision work Rapid screwdriving High working speeds can be attained with the Zyklop Mini bit ratchet. The thumb wheel is important, enabling more rapid screwdriving, and the lever of the Zyklop Mini only needs to be used for the final tightening of the screw. Slim design Its slim design makes it ideal for all particularly confined working situations. Is such a small tool sufficiently resilient? The Zyklop Mini 1 can withstand a torque up to 65 Nm. That is far more power than can normally be transferred to such a small tool. What parts can be connected to the Zyklop Mini 1? Bits and sockets. Bits can be connected directly. However, a holder can be connected first and then the bit can be attached to this. This then serves as an extension with a free-turning sleeve. An adaptor e.g. Wera 870/1 is needed for sockets - ¼“ hexagonal on a square drive (included in the Bit-Check and with the individual Zyklop Mini 1 in the set). Zyklop Mini 2 The Zyklop Mini 2 is suitable for the direct attachment of the special Wera Zyklop sockets 8790 FA. These sockets feature a very low height, ideal for confined working spaces. Set Contents : 05135918001 8001 A Bit Ratchet ¼” 1x 1/4“x87 mm 8005 Zyklop Mini 2 Ratchet 05003660001 1x 107 mm 813 Bitholding screwdriver 05051274001 1x 1/4” x 78 mm 870/1 Adaptor 05136000001 1x 1/4“ x 25 mm 851/1 Z bits 05072070001 1x PH 1 x 25 mm 05072072001 1x PH 2 x 25 mm 855/1 Z bits 05072080001 1x PZ 1 x 25 mm 05072082001 1x PZ 2 x 25 mm 867/1 TORX bits 05066485001 1x TX 10 x 25 mm 05066486001 1x TX 15 x 25 mm 05066487001 1x TX 20 x 25 mm 05066488001 1x TX 25 x 25 mm 05066490001 1x TX 30 x 25 mm 05066491001 1x TX 40 x 25 mm 840/1 Z bits 05056315001 1x 3 x 25 mm 05056320001 1x 4 x 25 mm 05056325001 1x 5 x 25 mm 05056330001 1x 6 x 25 mm 8790 FA Zyklop socket with 1/4” and Hexagon 11 drive 05003665001 1x 4 mm 05003667001 1x 5 mm 05003668001 1x 5.5 mm 05003669001 1x 6 mm 05003670001 1x 7 mm 05003675001 1x 8 mm 05003690001 1x 10 mm 05003684001 1x 12 mm 05003685001 1x 13 mm Hook and Loop Fastener Strip 120 1x 120x50 mm

Article description Pouch with 89-mm long bits. Includes 816 R Kraftform holder with Rapidaptor quick-release chuck and multi-component Kraftform handle for low-fatigue working. Suitable for manual and power tool operations; 33-piece. Pouch with 89 mm-long bits Kraftform holder with Rapidaptor quick-release chuck Rapidaptor quick-release chuck allows rapid bit change Tough viscous bits for universal use Suitable for manual and power tool operations For fixed workplace locations and external sites Frequently, users have to work with their tools at a fixed workplace location as well as at external sites. Just as frequently, it is only on site that a decision is taken as to whether to work manually or with a power tool. The Kraftform Kompakt tool sets equip the user for both types of operation with just single set. Additionally, the sets are kept in belt pouches or plastic cases. This keeps them secure and clean and means that they are clearly arranged for easy tool selection, something that is very practical when they are to be used or transported. Handle/interchangeable blade system The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Manual and power tool operations The sets come with a Kraftform handle, quick-release chuck and bits for manual and power tool operations. Chuck-all The Rapidaptor quick-release chucks hold ¼“ DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. Hex-Plus Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The TRI-WING screwdriving system The TRI-WING® screwdriving system is mainly found in aviation and household technology (here e.g. on live components). The asymmetric arrangement of the three profile flanks prevents the use of anything other than the original tools. The high-precision Wera profile design ensures a secure fit of the tool in the head of the screw. The blades are manufactured out of bit material. The Wera know-how with regard to the hardening technology ensures a long service life of the tool. TORQ-SET Mplus Wera developed the Mplus profile with stronger flanks compared with tools with a conventional TORQ-SET® profile. This results in approximately 70 % extra torsional strength and greatly extends the service life of Wera Mplus tools. Storage and transport The tools can be stored and carried either in a solid plastic case or a robust pouch. In this way the tool is always to hand. Set contents: 05059297001 816 R Bitholding screwdriver with Rapidaptor quick-release chuck 05051462001 1x 1/4” x 119 mm 851/4 Z bits 05059760001 1x PH 1 x 89 mm 05059775001 1x PH 2 x 89 mm 05059795001 1x PH 3 x 89 mm 855/4 Z bits 05060029001 1x PZ 1 x 89 mm 05060035001 1x PZ 2 x 89 mm 05060043001 1x PZ 3 x 89 mm 867/4 Z TORX® BO bits with bore hole 05060048001 1x TX 8 x 89 mm 05060050001 1x TX 10 x 89 mm 05060051001 1x TX 15 x 89 mm 05060052001 1x TX 20 x 89 mm 05060053001 1x TX 25 x 89 mm 05060054001 1x TX 30 x 89 mm 05060056001 1x TX 40 x 89 mm 05060057001 1x TX 27 x 89 mm 840/4 Z Tamper-proof Hex-Plus BO bits 05059640001 1x 2 x 89 mm 05059641001 1x 2.5 x 89 mm 05059642001 1x 3 x 89 mm 05059643001 1x 4 x 89 mm 05059644001 1x 5 x 89 mm 05059645001 1x 6 x 89 mm 800/4 Z bits 05059490001 1x 1.2 x 6.5 x 89 mm 871/4 TORQ-SET® Mplus bits 05066682001 1x 10 x 89 mm 05066686001 1x 6 x 89 mm 05066687001 1x 8 x 89 mm 875/4 TRI-WING® bits 05066785001 1x 1 x 89 mm 05066786001 1x 2 x 89 mm 05066787001 1x 3 x 89 mm 05066788001 1x 4 x 89 mm 857/4 Z Spanner bits 05057160001 1x 4 x 89 mm 05057161001 1x 6 x 89 mm 05057162001 1x 8 x 89 mm 05057163001 1x 10 x 89 mm Hook and Loop Fastener Strip 70 1x 50x70 mm

Article description Premium Kraftform Plus screwdriver with electrician's blade. Multi-component Kraftform Plus handle for comfortable ergonomic screwdriving, which avoids blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface “bites” into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Code mm mm mm mm mm inch inch Blade thickness Blade Width Blade Length Handle Length Blade Diameter Blade Width Blade Length 05008061001 1.2 6.0 100 105 6.0 15/64“ 4” Slotted screwdriver -electrician's blade Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. Lasertip prevents slipping out It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally “bites” itself firmly into the screw head. Slipping out becomes a thing of the past. Lasertip A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip “bites” itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Reduced contact pressure Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Take it easy Tool Finder Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Kraftform The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Prevents hand injuries The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. Rapid hand repositioning The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin “sticking” to the handle. The surrounding hard zones with large diameters glide like wheels through the hand.

Overview Kraftform Micro screwdriver for recessed TORX® screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Anti-roll feature and swivel cap for rapid twisting The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size

Article description Tough Wera bits for slotted screws, for universal use. 1/4“ hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For slotted screws Tough for hard materials 1/4” hexagone drive (Wera connecting series 4) Tough-absorbing Bits Tough-absorbing Wera Bits (Z) Prevent any premature Breakage of the drive tip. Code mm mm mm inch mm 05059305001 0.5 3.0 50 2“ 3.0 05059450001 0.6 3.5 152 6” 3.5 05059451001 0.8 4.0 152 6“ 4.0 05059452001 1.0 5.5 152 6” 5.5 05059453001 1.2 6.5 152 6“ 6.2 05059500001 1.6 8.0 89 3 1/2” 8.0

Article description Premium Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and gentle work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Screwdriver for recessed TORX screws Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away The Wera Black Point tip offers an exact fit and optimum corrosion protection Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. Kraftform The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Rapid hand repositioning The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin “sticking” to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Large contact area The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. Non-roll feature The hexagonal non-roll feature prevents any rolling away at the workplace. Identification marking The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. Wera Black Point tip The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Code mm mm mm inch 05028000001 TX 5 60 70 3.5 2 3/8“ 05028001001 TX 6 60 70 3.5 2 3/8” 05028002001 TX 7 60 70 3.5 2 3/8“ 05028003001 TX 8 60 81 3.5 2 3/8” 05028005001 TX 10 80 81 4.0 3 1/8“ 05028010001 TX 20 100 98 4.5 4”

Article description Premium Kraftform Plus screwdriver by Wera. Hard handle zones for high working speeds, soft handle zones for a high torque transfer and for fast and smooth work. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface “bites” into the screw head and unintentional slipping is a thing of the past. “Take it easy” tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids bits from rolling away annoyingly at the workplace. Screwdriver, for cross-recess screws, Pozidriv Multi-component Kraftform handle for fast and ergonomic screwdriving “Take it easy” tool finder. colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. Lasertip prevents slipping out It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally “bites” itself firmly into the screw head. Slipping out becomes a thing of the past. Lasertip A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip “bites” itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Reduced contact pressure Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Kraftform The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Rapid hand repositioning The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin “sticking” to handle. The surrounding hard zones with large diameters glide like wheels through the hand. Non-roll feature The hexagonal non-roll feature prevents amy rolling away at the workplace. “Take it easy tool” finder Screwdrivers with “take it easy”tool finder:colour coding according to profile and size stamp. Code mm mm mm inch 05009315001 PZ 2 100 105 6.0 4“ 05009310001 PZ 1 80 98 4.5 3 1/8” 05009320001 PZ 3 150 112 8.0 6"

For socket head screws Ductile and tough for hard materials Hex-Plus allows socket head screws to live longer 1/4“ hexagon drive (Wera connecting series 4) Suitable for AEG, ARO, Atlas-Copco, Biax, Black & Decker, Bosch, Buckeye Tools etc. Tough viscous Wera bits for hexagon socket screws for universal use. The HexPlus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. 1/4”hexagon, suitable for holders as per DIN ISO 1173-F 6.3.