The Proskit MT-7031 Mini LAN Cable Tester is a compact, portable device designed to quickly and accurately test Ethernet cables (LAN cables) to ensure they are wired correctly and functioning properly. This tool is essential for anyone working with network setups, such as IT professionals, electricians, or technicians. It allows users to verify cable integrity, check wiring configurations, and troubleshoot connection issues in a variety of networking environments. Key Features: Compact and Portable Design: The Proskit MT-7031 is designed to be small and lightweight, making it highly portable and easy to carry around for on-the-go testing. It’s ideal for use in tight spaces or when conducting fieldwork, ensuring ease of transport in toolkits or pockets. Ethernet Cable Testing: The MT-7031 is specifically designed to test Ethernet cables, including Cat 5, Cat 5e, Cat 6, and other similar LAN cables. It ensures the cable is wired according to the correct standard, such as T568A or T568B, and can detect common wiring issues. Testing for Correct Wiring: The device checks the wiring sequence of the cable to ensure that all wires are correctly connected. This helps identify if there are issues with the wiring, such as incorrect pinouts or open circuits, which could lead to network connection problems. The tester indicates whether the cable is properly wired for straight-through or crossover configuration. LED Indicators: The tester features LED indicators that visually display the wiring status of each individual wire inside the Ethernet cable. The lights show whether the cable is properly wired, helping users to quickly diagnose problems. Green lights usually indicate correct wiring. Red lights or no lights may indicate miswiring or open connections, signaling where the issue lies. Short Circuit and Open Circuit Detection: The Proskit MT-7031 can detect short circuits and open circuits within the cable, which is vital for ensuring a reliable network connection. If any wire is not connected or is incorrectly wired, the tester will indicate the specific problem. Simple and Easy to Use: The tester is straightforward to use, requiring no special knowledge or complex settings. Simply plug one end of the LAN cable into the main tester and the other end into the remote unit (which may be a detachable unit in some models). The tester will then provide instant feedback on the status of the cable. Remote Unit (Optional): In some versions of the MT-7031, the tester may include a remote unit that allows you to test cables without needing both ends to be near the main tester. This is useful when testing long cables or in large installations where the two ends of the cable are far apart. Battery-Powered: The Proskit MT-7031 operates on standard battery power, ensuring portability and ease of use in locations where a power source may not be readily available. It’s designed to conserve power, extending battery life during testing. Wide Application: This tester is ideal for a variety of environments, including: Network Installations: Ensuring proper wiring of Ethernet cables in network infrastructure. Home and Office Networking: Verifying LAN cables for proper connection in homes, offices, or small businesses. Troubleshooting: Helping network administrators and technicians quickly diagnose and repair faulty cables. IT Support: Ensuring that cables are correctly wired during computer or equipment setup. Durable Construction: The tester is built with durability in mind, designed to withstand the wear and tear of regular use in professional environments. The small yet sturdy casing protects the internal components from damage during transport or in rugged conditions. Applications: Network Testing: Ideal for verifying the functionality of LAN cables before installation or during troubleshooting. Installation: Useful for testing and certifying new Ethernet cables during network setup or maintenance. Field Use: A compact, portable solution for IT professionals, allowing them to test cables in various settings, such as data centers, offices, or homes. Cable Diagnostics: Quickly diagnosing issues with existing cables, such as miswiring, shorts, or open circuits, saving time in repairs. Summary: The Proskit MT-7031 Mini LAN Cable Tester is a compact, reliable, and easy-to-use tool designed to test Ethernet cables for correct wiring and functionality. With LED indicators for each wire, the ability to detect short and open circuits, and simple operation, it’s an essential tool for professionals who need to verify LAN cable integrity. Its portable design makes it an excellent choice for technicians working in the field or on-site installations, ensuring that Ethernet cables are properly configured for optimal network performance.

Wera torque screwdriver. Dependable protection against electrostatic energy and associated damage. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with ¼“ hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftfrom ESD torque screwdriver with Rapidadptor Quick-release chuck Multi-component kraftfrom handle for fast and low fatigue working Hexagonal anti-roll feature against rolling away Rapidaptor quick-release chuck for bits with 1/4” hex head drive Adjustable Torque Screwdrivers Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. Wera ESD Tools The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. Setting with Speed Simple setting of the required torque by hand. Easy-to-read Easy-to-read scale value. Attachable magnifying glass Articles 7430, 7431 and 7432 all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. Measurement accuracy Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque Unlimited torque for loosening seized screws. Versatile Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly.

As installation spaces become increasingly confined, it remains necessary that tools enable users to work successfully. Narrow spaces require additional placement points of the tool, to allow screws to be accessed and actuated. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be “taken” every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With Take it easy tool finder: colour coding by size. The Joker pouches are suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end “takes” the screw every 15° Slim ring side with 15° crank Suitable for docking with the Wera 2go system For very tight spaces The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be “accessed” every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Joker 6003: For return angles of less than 30° Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. Double-hex geometry The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. Joker 6003: Tilted ring side The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). Suitable for docking with the Wera 2go system The Joker pouches are suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back. Set contents: 05020231001 6003 Joker Combination wrench 05020200001 1x 8 x 115 mm 05020201001 1x 10 x 125 mm 05020202001 1x 11 x 135 mm 05020203001 1x 12 x 148 mm 05020204001 1x 13 x 160 mm 05020205001 1x 14 x 167 mm 05020206001 1x 15 x 174 mm 05020207001 1x 16 x 182 mm 05020208001 1x 17 x 190 mm 05020209001 1x 18 x 210 mm 05020210001 1x 19 x 230 mm Hook and Loop Fastener Strip 240 1x 50x240 mm

16-piece wrench set for bicycle applications with torque control including Wera Clique-Torque wrench A 5 (2.5-25 Nm) Sockets and bit sockets for the most popular screw profiles on road bikes, mountain bikes and e-bikes Easy setting and saving of the desired torque value with audible and tactile click when the scale value is reached (click 1) Safely quantified force: when the set value is reached, the torque wrench triggers audibly and noticeably (click 2) Precise to ± 4% as per DIN EN ISO 6789-1:2017-07. The 16-piece set from the screwdriving tool specialist Wera solves the most important screwdriving problems associated with bicycles, with reliable control of applied torque to protect sensitive components. With a click-torque wrench in the unmistakable Wera design.Very robust design with high accuracy as per DIN EN ISO 6789-1: 2017-07. Easy setting and saving of the default values. The audible and tactile snapping on reaching the scale values also facilitates the safe setting of the desired torque values. The robust release mechanism guarantees a clearly audible and tactile trigger signal when the set torque is reached. For clockwise torque-control and with a reversible 45-tooth ratchet. The torque wrench is extremely space-saving and supplemented with accessories that are suitable for the torque range and adapted to the most common screwed connections on bicycles; in a robust, surface-friendly textile box. Included are: Click Torque A 5, 1/4“, 2.5 - 25 Nm, 4 sockets with 1/4” drive, 7 Hex Plus hexagon bit sockets and 4 TORX® bit sockets. Sockets and bit sockets with “Take it easy” tool finder with colour coding by size - for easy and quick location of the required tool. Bit sockets with holding function for extra comfortable screwdriving without the screw falling off the tool. Incredibly compact arrangement for a lot of tools in a small space. Textile box with very high robustness and longevity. Additional surface protection through the textile outer material. Low weight and volume for easier mobility. Bit sockets with all the benefits of Wera bit technology such as fitting accuracy, wear resistance and concentric run-out properties Set contents: Click-Torque A 5: 05075604001 1 x 1/4" x 2.5-25 Nm 8767 A: 05003390001 1 x TX 10 x 28 mm 05003391001 1 x TX 20 x 28 mm 05003392001 1 x TX 25 x 28 mm 05003393001 1 x TX 30 x 28 mm K240: 1 x 50 x 240 mm 8790 HMA: 05003509001 1 x 10 x 23 mm 05003512001 1 x 13 x 23 mm 05003513001 1 x 14 x 23 mm 05003499001 1 x 15 x 23 mm 8740 A HF: 05003332001 1 x 3 x 28 mm 05003333001 1 x 4 x 28 mm 05003335001 1 x 5 x 28 mm 05003336001 1 x 5 x 100 mm 05003337001 1 x 6 x 28 mm 05003338001 1 x 6 x 100 mm 05003339001 1 x 8 x 28 mm

Premium bits for TORX BO socket screws. TORX® BO screws have a protruding pin in their drive profile. This prevents unauthorized loosening, as these screws cannot be operated with “normal” TORX tools. Only special TORX BO tools have a bore which can mount the pin. Tough, for universal use. 1/4“ hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For recessed TORX screws with securing pin TORX® bit with bore hole on the output side Tough for hard materials TORX with borehole (BO) TORX tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that ”normal“ TORX tools cannot be used. This pin fits into the borehole of TORX BO tools allowing safety screws to be unfastened. Tough bits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. Tip Size Blade Length Blade Length Blade diameter Code mm inch mm 05060050001 TX 10 89 3 1/2” 4.0 05060051001 TX 15 89 3 1/2“ 4.0 05060052001 TX 20 89 3 1/2” 4.5 05060053001 TX 25 89 3 1/2“ 6.0 05060054001 TX 30 89 3 1/2” 6.0 05060056001 TX 40 89 3 1/2"

Overview Bit holder with Rapidaptor quick-release chuck for bits with 1/4“ hexagon drive Multi-component Kraftform handle for fast and ergonomic screwdriving Hexagonal anti-roll feature against rolling away Rapidaptor technology for rapid change of the bits or blades Retractable bayonet blade High quality bit holder. The telescopic bayonet blade, which can be lowered into the handle, together with the quick-release chuck allows fast manual work even in confined installation situations. The Rapidaptor quick-release chuck enables rapid bit change without needing any special tools. The strong permanent magnet holds the bits absolutely securely. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Suitable for bits with ¼” hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). The telescopic blade I When the unique telescopic blade is lowered into the handle, fast, easy screw-driving action is possible, even in the tightest spots! The telescopic blade II By pushing the clamping sleeve, the telescopic blade can be extended out of the handle and the compact tool becomes a full-sized screwdriver. The telescopic blade III If the clamping sleeve is pushed again the telescopic blade can be taken out of the handle, and be used as a machine bit adaptor. Rapid-in and self-lock The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Rapid-out Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Chuck-all The Rapidaptor quick-release chucks hold ¼“ DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. Rapid-spin The free-turning sleeve allows screw steadying at the start of the screwdriving process. This makes it easier to apply the tool to the screw and prevents slipping. It can also be used as a short extension for ¼” applications e.g. in combination with the Wera Zyklop Ratchets. Kraftform The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either.

Ratchets and screws in a Kraftform Kompakt format. These drop-forged, full-steel ratchets, Zyklop Mini 1 and 2, combine filigree design with incredible robustness. For particularly rapid screwdriving in confined working situations. Zyklop Mini 1 or Zyklop Mini 2 can be used whenever screwdriving with power tools or conventional hand tools is unfeasible for lack of space. 1 bit ratchet Zyklop Mini 1; suitable for the take-up of bits with ¼“ hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 and Wera connecting series 1 and 4; also possible to use ¼” sockets by attaching the Wera adaptor 870/1. 1 socket ratchet Zyklop Mini 2; suitable for the direct attachment of Wera Zyklop special sockets 8790 FA. Drop-forged, full-steel ratchet design For screwdriving in very confined working situations Zyklop sockets 8790 FA for direct insertion in the Zyklop Mini 2 Bit holder, 9 sockets, 14 bits and 1 adaptor In robust textile box The Zyklop Mini Ratchets For all difficult-to-access applications. The Zyklop Mini The fine tooth mechanism, with its 60 teeth, allows a small return angle of only 6° - ideal for precision work Rapid screwdriving High working speeds can be attained with the Zyklop Mini bit ratchet. The thumb wheel is important, enabling more rapid screwdriving, and the lever of the Zyklop Mini only needs to be used for the final tightening of the screw. Slim design Its slim design makes it ideal for all particularly confined working situations. Is such a small tool sufficiently resilient? The Zyklop Mini 1 can withstand a torque up to 65 Nm. That is far more power than can normally be transferred to such a small tool. What parts can be connected to the Zyklop Mini 1? Bits and sockets. Bits can be connected directly. However, a holder can be connected first and then the bit can be attached to this. This then serves as an extension with a free-turning sleeve. An adaptor e.g. Wera 870/1 is needed for sockets - ¼“ hexagonal on a square drive (included in the Bit-Check and with the individual Zyklop Mini 1 in the set). Zyklop Mini 2 The Zyklop Mini 2 is suitable for the direct attachment of the special Wera Zyklop sockets 8790 FA. These sockets feature a very low height, ideal for confined working spaces. Set Contents : 05135918001 8001 A Bit Ratchet ¼” 1x 1/4“x87 mm 8005 Zyklop Mini 2 Ratchet 05003660001 1x 107 mm 813 Bitholding screwdriver 05051274001 1x 1/4” x 78 mm 870/1 Adaptor 05136000001 1x 1/4“ x 25 mm 851/1 Z bits 05072070001 1x PH 1 x 25 mm 05072072001 1x PH 2 x 25 mm 855/1 Z bits 05072080001 1x PZ 1 x 25 mm 05072082001 1x PZ 2 x 25 mm 867/1 TORX bits 05066485001 1x TX 10 x 25 mm 05066486001 1x TX 15 x 25 mm 05066487001 1x TX 20 x 25 mm 05066488001 1x TX 25 x 25 mm 05066490001 1x TX 30 x 25 mm 05066491001 1x TX 40 x 25 mm 840/1 Z bits 05056315001 1x 3 x 25 mm 05056320001 1x 4 x 25 mm 05056325001 1x 5 x 25 mm 05056330001 1x 6 x 25 mm 8790 FA Zyklop socket with 1/4” and Hexagon 11 drive 05003665001 1x 4 mm 05003667001 1x 5 mm 05003668001 1x 5.5 mm 05003669001 1x 6 mm 05003670001 1x 7 mm 05003675001 1x 8 mm 05003690001 1x 10 mm 05003684001 1x 12 mm 05003685001 1x 13 mm Hook and Loop Fastener Strip 120 1x 120x50 mm

Wera torque screwdriver. Dependable protection against electrostatic energy and associated damage. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with ¼“ hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftform ESD torque screwdriver with Rapidaptor quick-release chuck ESD-safe tool thanks to surface resistance of ≤109 Ohm Multi-component Kraftfrom handle for fast and low-fatigue working Hexagonal anti-roll feature against rolling away Rapidaptor quick-release chuck for bits with 1/4” hex head drive Adjustable Torque Screwdrivers Wera's adjustable torque screwdriver allow variable torque settings with maximum precision and ensure that the user gets the very best result in the familiar wera design with superior ergonomics. Wera ESD Tools The requirements for ESD-Safe screwdriver are specified in the european standard DIN EN 61340-5-1. This standard also includes a Handle that has to be out of a defined conductive Material. the Wera product in the ESD series satisfy these standards and the even more stringent requirement demanded by some technology companies. Simple Setting Simple setting of the required torque by hand Easy-to-read Easy-to-read Scale Value. Attachable magnifying glass Articles 7430, 7431, and 7432 all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility.

Overview Convinient direction change thanks to switchover lever Fine-pitched ratchet mechanism and small return angle of 6 Very robust without any restriction on torque Quick-release chuck with Rapidator technology With Take it easy tool finder: colour coding by size. Article description: Combination tool consisting of a ratchet, bits, sockets and holder in a minimum of space. Ideal as a universal companion for a whole host of screwdriving applications. High quality bit holder with Kraftform Plus handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Mini ratchet for rapid working when fastening jobs with a power tool or conventional hand tools are not feasible due to insufficient space. Rapid changeover from left to right direction and vice versa by using the switchover lever. Fast work possible by turning the thumbwheel (with the thumb) on the ratchet head. Simplest operation even with just one hand. Ergonomic ratchet head/lever: Kraftform geometry with perfectly shaped contact areas for the fingers. The direct bit take-up in the ratchet head makes for a mini tool design and is ideal for low working heights. The small return angle of 6° allows for precise work. Robust drop-forged, full steel design. Torque of over 65 Nm. The Rapidaptor bit holder with free-turning sleeve: can be used as an extension; for rapid bit change without any special tools – even the very smallest bits with just a single hand. Tough viscous bits for universal use. Sockets for both manual as well as power tool operations for almost all applications. “Take it easy” Tool Finder with colour coding according to size - for simple and rapid accessing of the required tool. Featuring a good grip to allow easy pick-up even with oily hands. Ball stop groove, for hex head bolts and nuts; chrome vanadium steel, matt chrome-plated.