The Proskit MT-7063 PoE & LAN Cable Tester is a versatile and essential tool designed for testing Ethernet cables (LAN) as well as Power over Ethernet (PoE) cables. This tool is invaluable for network professionals, electricians, and technicians who need to verify the performance and integrity of Ethernet cables, especially in environments where PoE technology is used to supply power to devices over a single Ethernet cable. Key Features: PoE (Power over Ethernet) Testing: The MT-7063 can test Power over Ethernet (PoE) cables to determine whether PoE power is being transmitted through the cable. This is crucial for verifying installations of devices that rely on PoE, such as IP cameras, VoIP phones, wireless access points, and other network devices that require both power and data through the same cable. The tester can detect whether PoE voltage is present, allowing users to verify that the cables are correctly providing power to connected devices. LAN Cable Testing: The tester is designed to test standard Ethernet cables (including Cat 5, Cat 5e, Cat 6, and Cat 6a), ensuring proper wiring and functionality. It checks whether the cables are wired correctly according to the T568A or T568B wiring standards. This is important for ensuring that network cables are wired in the correct sequence for optimal data transmission. Wiremap (Wiring Integrity): The MT-7063 is equipped with the ability to check the wiremap of the Ethernet cable. This includes verifying that all wires are properly connected, in the correct order, and ensuring there are no open circuits or short circuits. If any wiring issues are found, the tester will indicate the specific problem using LED lights. LED Indicators: The tester uses LED lights to show the status of each individual wire within the Ethernet cable. If the cable is wired correctly, green LEDs light up for each corresponding wire. If there is a problem (e.g., miswiring, open circuit, or short circuit), the relevant LED will light red or will be inactive, alerting the user to the specific issue. Short Circuit and Open Circuit Detection: The MT-7063 detects both short circuits and open circuits in Ethernet cables. A short circuit happens when two wires are mistakenly connected, while an open circuit occurs when a wire is not connected at all. Identifying these issues is crucial for ensuring that the cable will function properly in a network. Remote Unit for Long Cable Testing: The tester includes a remote unit, allowing for testing of long cables without having to have both ends near the main tester. This is particularly useful when testing cables that are already installed or are difficult to access fully. The remote unit is often designed for easy plug-in and quick testing. Clear LCD Display: The tester features a clear LCD display that provides visual feedback on whether the Ethernet cable is wired correctly and whether PoE power is detected. This display helps users interpret test results quickly and accurately. Compact and Portable Design: The Proskit MT-7063 is compact and lightweight, making it portable and easy to carry around for fieldwork. Its small size ensures that it can easily fit into a toolbag or be carried around on-site for easy access and use. Battery-Powered: The tester is powered by standard batteries, which ensures portability and ease of use in locations without access to an external power source. Its low power consumption helps extend battery life, making it ideal for frequent testing. Durability: Built with durability in mind, the MT-7063 is designed to withstand regular use in rugged environments, providing reliability for technicians who work in different locations or on different types of network setups. Easy to Use: The Proskit MT-7063 is designed to be simple to operate. You just need to plug one end of the Ethernet cable into the tester and the other end into the remote unit (if applicable). The tester will quickly display the results on the screen or via LED indicators. Applications: PoE Verification: Ideal for checking whether Power over Ethernet (PoE) is being properly supplied through Ethernet cables to power devices like IP cameras, wireless access points, and phones. Cable Troubleshooting: Useful for identifying wiring issues in Ethernet cables, such as miswiring, open circuits, shorts, or incorrect configurations. Network Installations: Perfect for verifying the integrity of Ethernet cables during the installation of networking equipment and ensuring that the wiring standards (T568A/B) are followed. IT Professionals: A must-have for IT technicians who are involved in the setup, maintenance, and troubleshooting of network systems. Home and Office Networking: Great for testing Ethernet and PoE cables in small-to-medium office or home network installations. Field Testing: Compact and easy to carry, it is an ideal tool for field technicians who need to perform quick tests on network cables during installations or maintenance. Summary: The Proskit MT-7063 PoE & LAN Cable Tester is a highly functional, easy-to-use tool designed for testing Ethernet cables and Power over Ethernet (PoE) cables. With its PoE detection, wiremap checking, short and open circuit detection, and clear LCD display, this tester provides reliable performance for professionals working with network cables. Its compact size, remote testing functionality, and LED indicators make it a versatile tool for field use and quick diagnostics in a wide range of network-related tasks. Whether you are installing, maintaining, or troubleshooting Ethernet and PoE cables, the MT-7063 offers the features necessary to ensure your network is performing optimally. You said: Proskit MT-7029 Noise-Filtering NetworkPoE Toner & Probe ChatGPT said: ChatGPT The Proskit MT-7029 Noise-Filtering Network PoE Toner & Probe is a specialized tool designed for testing and troubleshooting network cables, including those used for Power over Ethernet (PoE) systems. This toner and probe kit is an essential tool for network professionals, electricians, and IT technicians, especially when dealing with cable identification and PoE-enabled devices in complex network environments. Key Features: Noise-Filtering Capability: One of the standout features of the Proskit MT-7029 is its noise-filtering functionality. This allows the toner and probe to detect and trace network cables even in environments with high levels of electrical noise or interference. It ensures that the signals being transmitted by the toner are clear and precise, making it easier to identify cables and troubleshoot network issues. PoE Detection: The MT-7029 is specifically designed to work with Power over Ethernet (PoE) cables. It can detect whether PoE voltage is present on the cable, allowing users to confirm that both power and data are being transmitted through a single Ethernet cable. This is particularly important for installations involving PoE-powered devices like IP cameras, VoIP phones, and wireless access points. By verifying the presence of PoE power, users can quickly determine whether a cable is capable of powering devices in addition to transmitting data. Toner and Probe Design: The toner is the active part of the tool that sends a signal through the network cable, allowing the user to trace its path. The probe detects the signal emitted by the toner and produces an audible tone, allowing the technician to locate the cable without needing to access both ends of the wire. The signal strength and clarity of the tone help guide the user to the correct cable, ensuring efficient and accurate cable identification. Cable Tracing: This tool is ideal for cable tracing, allowing technicians to trace cables even when they are bundled together or hidden behind walls, ceilings, or other obstacles. The noise-filtering ability ensures that the signal can be detected and traced clearly, without interference from other nearby cables or electrical systems. Clear Audio Tone: The probe produces a clear, audible tone that indicates the presence of the toner’s signal in the cable. The volume of the tone can often be adjusted, making it easier to identify the cable's location even in noisy environments. A louder tone indicates that the probe is closer to the signal source, helping users pinpoint the cable. Multiple Applications: Cable Identification: The MT-7029 can be used to identify the specific path of individual cables in a network setup, making it useful for labeling or troubleshooting. PoE Troubleshooting: It helps verify that cables in PoE installations are delivering the proper power and are correctly wired, ensuring that PoE-powered devices will function properly. Network Maintenance: The tool is helpful for network administrators and technicians who need to troubleshoot or modify network wiring, whether in commercial or residential settings. Field Use: Due to its portability and easy-to-use design, the MT-7029 is a perfect tool for field technicians working in different locations, especially for large network installations where finding and diagnosing cable problems can be time-consuming. Adjustable Sensitivity: The probe comes with adjustable sensitivity settings, allowing users to fine-tune the device for more precise cable identification. This is particularly useful in large installations or dense cable environments, where other cables might interfere with the signal. Ergonomic Design: Both the toner and probe are designed for ergonomics, making them easy to handle and use for extended periods. The user-friendly interface and design ensure minimal fatigue during use, which is especially important during long troubleshooting sessions. Durable Construction: The MT-7029 is built to withstand the rigors of daily use in professional settings. Its durable casing protects the internal electronics from damage, ensuring a long service life even under tough working conditions. Battery-Powered: The toner and probe are powered by standard batteries, ensuring portability and easy use in locations where external power sources may not be readily available. Applications: PoE Network Installations: Ideal for testing and troubleshooting PoE cables, ensuring that both power and data are transmitted properly to connected devices. Cable Tracing in Complex Installations: Useful for tracing and identifying network cables in environments where multiple cables are bundled together, in cabinets, or behind walls. Network Troubleshooting: Essential for identifying faulty cables, determining the correct path for cable connections, and verifying proper PoE power delivery in network setups. Field Work: Compact and portable, this tool is an excellent choice for field technicians working in various locations to diagnose and resolve network cable issues. Infrastructure Maintenance: Perfect for technicians maintaining or upgrading network infrastructures in commercial and residential buildings, helping them identify the correct cables without making unnecessary disconnections. Summary: The Proskit MT-7029 Noise-Filtering Network PoE Toner & Probe is a highly effective tool designed for cable tracing and PoE testing. With its noise-filtering capabilities, PoE voltage detection, and adjustable sensitivity, it provides accurate and clear results for network professionals working with Ethernet and PoE systems. The ergonomic design, battery-powered convenience, and clear audio signals make it a reliable choice for field technicians and IT professionals looking to troubleshoot, identify, and verify network cables in diverse environments. Whether for PoE verification, cable tracing, or network maintenance, the Proskit MT-7029 is an essential tool for ensuring the functionality and integrity of network installations.

The Proskit MT-7063 PoE & LAN Cable Tester is a versatile and essential tool designed for testing Ethernet cables (LAN) as well as Power over Ethernet (PoE) cables. This tool is invaluable for network professionals, electricians, and technicians who need to verify the performance and integrity of Ethernet cables, especially in environments where PoE technology is used to supply power to devices over a single Ethernet cable. Key Features: PoE (Power over Ethernet) Testing: The MT-7063 can test Power over Ethernet (PoE) cables to determine whether PoE power is being transmitted through the cable. This is crucial for verifying installations of devices that rely on PoE, such as IP cameras, VoIP phones, wireless access points, and other network devices that require both power and data through the same cable. The tester can detect whether PoE voltage is present, allowing users to verify that the cables are correctly providing power to connected devices. LAN Cable Testing: The tester is designed to test standard Ethernet cables (including Cat 5, Cat 5e, Cat 6, and Cat 6a), ensuring proper wiring and functionality. It checks whether the cables are wired correctly according to the T568A or T568B wiring standards. This is important for ensuring that network cables are wired in the correct sequence for optimal data transmission. Wiremap (Wiring Integrity): The MT-7063 is equipped with the ability to check the wiremap of the Ethernet cable. This includes verifying that all wires are properly connected, in the correct order, and ensuring there are no open circuits or short circuits. If any wiring issues are found, the tester will indicate the specific problem using LED lights. LED Indicators: The tester uses LED lights to show the status of each individual wire within the Ethernet cable. If the cable is wired correctly, green LEDs light up for each corresponding wire. If there is a problem (e.g., miswiring, open circuit, or short circuit), the relevant LED will light red or will be inactive, alerting the user to the specific issue. Short Circuit and Open Circuit Detection: The MT-7063 detects both short circuits and open circuits in Ethernet cables. A short circuit happens when two wires are mistakenly connected, while an open circuit occurs when a wire is not connected at all. Identifying these issues is crucial for ensuring that the cable will function properly in a network. Remote Unit for Long Cable Testing: The tester includes a remote unit, allowing for testing of long cables without having to have both ends near the main tester. This is particularly useful when testing cables that are already installed or are difficult to access fully. The remote unit is often designed for easy plug-in and quick testing. Clear LCD Display: The tester features a clear LCD display that provides visual feedback on whether the Ethernet cable is wired correctly and whether PoE power is detected. This display helps users interpret test results quickly and accurately. Compact and Portable Design: The Proskit MT-7063 is compact and lightweight, making it portable and easy to carry around for fieldwork. Its small size ensures that it can easily fit into a toolbag or be carried around on-site for easy access and use. Battery-Powered: The tester is powered by standard batteries, which ensures portability and ease of use in locations without access to an external power source. Its low power consumption helps extend battery life, making it ideal for frequent testing. Durability: Built with durability in mind, the MT-7063 is designed to withstand regular use in rugged environments, providing reliability for technicians who work in different locations or on different types of network setups. Easy to Use: The Proskit MT-7063 is designed to be simple to operate. You just need to plug one end of the Ethernet cable into the tester and the other end into the remote unit (if applicable). The tester will quickly display the results on the screen or via LED indicators. Applications: PoE Verification: Ideal for checking whether Power over Ethernet (PoE) is being properly supplied through Ethernet cables to power devices like IP cameras, wireless access points, and phones. Cable Troubleshooting: Useful for identifying wiring issues in Ethernet cables, such as miswiring, open circuits, shorts, or incorrect configurations. Network Installations: Perfect for verifying the integrity of Ethernet cables during the installation of networking equipment and ensuring that the wiring standards (T568A/B) are followed. IT Professionals: A must-have for IT technicians who are involved in the setup, maintenance, and troubleshooting of network systems. Home and Office Networking: Great for testing Ethernet and PoE cables in small-to-medium office or home network installations. Field Testing: Compact and easy to carry, it is an ideal tool for field technicians who need to perform quick tests on network cables during installations or maintenance. Summary: The Proskit MT-7063 PoE & LAN Cable Tester is a highly functional, easy-to-use tool designed for testing Ethernet cables and Power over Ethernet (PoE) cables. With its PoE detection, wiremap checking, short and open circuit detection, and clear LCD display, this tester provides reliable performance for professionals working with network cables. Its compact size, remote testing functionality, and LED indicators make it a versatile tool for field use and quick diagnostics in a wide range of network-related tasks. Whether you are installing, maintaining, or troubleshooting Ethernet and PoE cables, the MT-7063 offers the features necessary to ensure your network is performing optimally.

The Proskit MT-7031 Mini LAN Cable Tester is a compact, portable device designed to quickly and accurately test Ethernet cables (LAN cables) to ensure they are wired correctly and functioning properly. This tool is essential for anyone working with network setups, such as IT professionals, electricians, or technicians. It allows users to verify cable integrity, check wiring configurations, and troubleshoot connection issues in a variety of networking environments. Key Features: Compact and Portable Design: The Proskit MT-7031 is designed to be small and lightweight, making it highly portable and easy to carry around for on-the-go testing. It’s ideal for use in tight spaces or when conducting fieldwork, ensuring ease of transport in toolkits or pockets. Ethernet Cable Testing: The MT-7031 is specifically designed to test Ethernet cables, including Cat 5, Cat 5e, Cat 6, and other similar LAN cables. It ensures the cable is wired according to the correct standard, such as T568A or T568B, and can detect common wiring issues. Testing for Correct Wiring: The device checks the wiring sequence of the cable to ensure that all wires are correctly connected. This helps identify if there are issues with the wiring, such as incorrect pinouts or open circuits, which could lead to network connection problems. The tester indicates whether the cable is properly wired for straight-through or crossover configuration. LED Indicators: The tester features LED indicators that visually display the wiring status of each individual wire inside the Ethernet cable. The lights show whether the cable is properly wired, helping users to quickly diagnose problems. Green lights usually indicate correct wiring. Red lights or no lights may indicate miswiring or open connections, signaling where the issue lies. Short Circuit and Open Circuit Detection: The Proskit MT-7031 can detect short circuits and open circuits within the cable, which is vital for ensuring a reliable network connection. If any wire is not connected or is incorrectly wired, the tester will indicate the specific problem. Simple and Easy to Use: The tester is straightforward to use, requiring no special knowledge or complex settings. Simply plug one end of the LAN cable into the main tester and the other end into the remote unit (which may be a detachable unit in some models). The tester will then provide instant feedback on the status of the cable. Remote Unit (Optional): In some versions of the MT-7031, the tester may include a remote unit that allows you to test cables without needing both ends to be near the main tester. This is useful when testing long cables or in large installations where the two ends of the cable are far apart. Battery-Powered: The Proskit MT-7031 operates on standard battery power, ensuring portability and ease of use in locations where a power source may not be readily available. It’s designed to conserve power, extending battery life during testing. Wide Application: This tester is ideal for a variety of environments, including: Network Installations: Ensuring proper wiring of Ethernet cables in network infrastructure. Home and Office Networking: Verifying LAN cables for proper connection in homes, offices, or small businesses. Troubleshooting: Helping network administrators and technicians quickly diagnose and repair faulty cables. IT Support: Ensuring that cables are correctly wired during computer or equipment setup. Durable Construction: The tester is built with durability in mind, designed to withstand the wear and tear of regular use in professional environments. The small yet sturdy casing protects the internal components from damage during transport or in rugged conditions. Applications: Network Testing: Ideal for verifying the functionality of LAN cables before installation or during troubleshooting. Installation: Useful for testing and certifying new Ethernet cables during network setup or maintenance. Field Use: A compact, portable solution for IT professionals, allowing them to test cables in various settings, such as data centers, offices, or homes. Cable Diagnostics: Quickly diagnosing issues with existing cables, such as miswiring, shorts, or open circuits, saving time in repairs. Summary: The Proskit MT-7031 Mini LAN Cable Tester is a compact, reliable, and easy-to-use tool designed to test Ethernet cables for correct wiring and functionality. With LED indicators for each wire, the ability to detect short and open circuits, and simple operation, it’s an essential tool for professionals who need to verify LAN cable integrity. Its portable design makes it an excellent choice for technicians working in the field or on-site installations, ensuring that Ethernet cables are properly configured for optimal network performance.

he Proskit MT-1506 Pocket True-RMS Auto Range Multimeter is a compact, portable, and feature-rich digital multimeter designed for accurate electrical measurements in various applications. Its compact size, combined with True-RMS capabilities and auto-ranging functions, makes it an excellent tool for professionals and DIY enthusiasts alike. Below is a detailed description of its features and specifications: Key Features: True RMS Measurement: The Proskit MT-1506 is equipped with True RMS (Root Mean Square) measurement technology, which provides accurate readings for both sinusoidal and non-sinusoidal waveforms. This is especially important for accurately measuring power in modern electronic devices and equipment with distorted waveforms, such as inverters, UPS systems, and variable speed drives. Auto-Ranging Function: The meter features auto-ranging, meaning it automatically selects the correct measurement range based on the value being tested. This feature makes it easy to use, as you don't need to manually adjust the range for different measurements, ensuring both convenience and accuracy. Compact and Portable Design: As a pocket-sized multimeter, the MT-1506 is extremely compact and portable, making it convenient for fieldwork, on-site diagnostics, or carrying in a toolbox. Its small size does not compromise its functionality, providing professional-grade performance in a lightweight package. Wide Measurement Range: The Proskit MT-1506 is capable of measuring a broad range of electrical parameters, including: AC and DC Voltage: Measures voltages with a wide range, from millivolts (mV) to several hundred volts (V). AC and DC Current: Measures current, typically from microamperes (µA) to several amperes (A), allowing for testing in various applications such as electronics, appliances, and circuits. Resistance: Measures resistance in circuits, allowing users to check for continuity or test components like resistors, capacitors, or diodes. Diode and Continuity Testing: Includes diode testing and continuity checking with an audible beep when continuity is detected, which helps with quick circuit diagnostics. Large LCD Display: Despite its small size, the MT-1506 features a large LCD display, making it easy to read measurements clearly, even in dimly lit environments. Some models may include a backlight for visibility in low-light conditions, improving readability in a variety of settings. Data Hold Function: The Data Hold function allows the user to freeze the reading on the display, which is helpful when taking measurements in hard-to-reach places or when you need to record a reading without holding the meter in place. Low Power Consumption: The meter is designed with low power consumption, which extends battery life, making it ideal for prolonged use without the need to frequently change batteries. Safety Features: The MT-1506 is built with safety in mind, featuring overload protection and CAT III 600V safety rating, which allows it to safely measure electrical parameters in circuits up to 600V, making it suitable for use in residential and industrial applications. It also typically includes fuse protection to prevent damage to the meter in case of accidental overcurrent. Battery Powered: The multimeter operates on standard battery power, which ensures portability and ease of use in locations without direct access to external power sources. Multifunction Rotary Switch: The meter is equipped with a multifunction rotary switch that allows you to easily select the measurement type, range, and mode (voltage, current, resistance, etc.). The intuitive design of the switch makes it simple to navigate between settings quickly. Applications: Electrical Troubleshooting: Ideal for professionals and hobbyists diagnosing electrical problems in residential, commercial, and industrial settings. HVAC Systems: Great for measuring electrical parameters in heating, ventilation, and air conditioning systems. Automotive: Used for testing and troubleshooting electrical components in cars, trucks, and other vehicles. Home Appliances: Useful for checking the performance and safety of home appliances and electronics. DIY Projects: A handy tool for hobbyists and DIY enthusiasts working with electronics and electrical circuits. Safety Guidelines: Always ensure the multimeter is set to the correct mode before taking measurements to prevent damage to the device. Ensure that the meter is rated for the voltage and current levels being tested. Use the meter in accordance with its safety ratings (such as CAT III 600V) to avoid electrical hazards. Summary: The Proskit MT-1506 Pocket True-RMS Auto Range Multimeter is an excellent choice for those looking for a compact, reliable, and easy-to-use multimeter. With its True RMS capability, auto-ranging, broad measurement range, and safety features, it provides accurate readings for a wide variety of electrical testing tasks. Its pocket-sized design makes it highly portable, while its intuitive interface and display ensure users can quickly and easily perform measurements, making it an indispensable tool for both professionals and hobbyists.

The Proskit PK-1938M1 Professional Telecom & Networking Tool Kit is a comprehensive and versatile toolkit designed for professionals working in the fields of telecommunications, networking, and IT services. It includes a wide range of high-quality tools for installation, maintenance, and troubleshooting of telecom and networking systems, making it an ideal solution for professionals who need reliable, durable tools for both simple and complex tasks. Key Features: Complete Telecom & Networking Tool Set: The Proskit PK-1938M1 includes all the essential tools for telecommunications and networking, such as tools for crimping, cutting, stripping, testing, and punching down wires, among others. It’s specifically designed for working with network cables, telephone wires, fiber optic cables, and other telecom systems. High-Quality Crimping Tools: The kit includes professional-grade crimping tools that are essential for RJ-45 and RJ-11 connectors used in network and telecom cables. The crimping tools ensure secure and durable connections, which are vital for high-performance telecom and networking setups. The crimping tools are designed for precision and strength, ensuring that every connection is solid and free from issues. Cable Stripping and Cutting Tools: Cable Strippers: The kit includes insulated wire strippers that make it easy to strip the insulation from telecom or network cables without damaging the wires inside. They help prepare cables for crimping or other connections. Cable Cutter: A high-quality cable cutter is included for cutting cables to the required lengths, offering clean and precise cuts for various types of cables. Punch-Down Tool: The Proskit PK-1938M1 comes with a punch-down tool, which is essential for installing telephone and networking jacks (such as Keystone jacks or patch panels). The punch-down tool allows you to insert and secure wires into the punch-down blocks or connectors, ensuring stable connections for telecom and network systems. Network Cable Tester: The kit includes a network cable tester that is crucial for testing the integrity of network cables. It allows you to check whether Ethernet cables (such as CAT5, CAT6) are properly wired and functioning. The tester can detect common problems like miswiring, open circuits, and short circuits, which can help ensure the quality and reliability of your network connections. Ergonomic and Durable Tools: The tools in this kit are ergonomically designed for comfort and ease of use. They feature soft, non-slip handles for secure grip, which is especially important when working with cables for extended periods. The build quality of the tools is robust, made from high-strength materials to withstand frequent use, making the tools long-lasting and durable in demanding environments. Comprehensive Tool Set: The Proskit PK-1938M1 includes a wide variety of tools to cater to various tasks, such as stripping insulation, crimping connectors, cutting cables, testing cables, and making network connections. The comprehensive range of tools makes it suitable for telecom installations, network setups, troubleshooting, and maintenance in both professional and DIY contexts. Compact and Organized Storage: The Proskit PK-1938M1 comes with a compact, durable carrying case designed for easy storage and portability. The case helps keep all the tools organized, ensuring that you can quickly access what you need while on the job. The case also keeps tools protected and ensures that they stay in good condition during transport. Versatile Applications: This tool kit is designed for professionals who work in various networking and telecom environments. It is suitable for: Telecom cable installations (telephone lines, fiber optic cables, and more). Network installations (setting up local area networks (LANs), Ethernet connections, etc.). Cable testing and troubleshooting (identifying faults or miswiring in telecom or network cables). DIY networking projects (home network setups, telephone system maintenance). Included Components: The Proskit PK-1938M1 Professional Telecom & Networking Tool Kit typically includes the following: Crimping Tool: For crimping RJ-45 and RJ-11 connectors onto cables. Cable Strippers: For stripping the insulation from network and telecom cables without damaging the inner wires. Cable Cutter: For cutting cables to the required length. Punch-Down Tool: For installing cables into connectors, such as Keystone jacks or patch panels. Network Cable Tester: To test the integrity of network cables and ensure proper connections. Tweezers: For precision handling of small components. Small Flathead and Phillips Screwdrivers: For general telecom and networking tasks that require screws. Cable Ties: For organizing cables and keeping them neat. Modular Connectors: Includes RJ-45 and RJ-11 connectors for network and telephone cables. Compact Carrying Case: To store all the tools neatly and transport them conveniently. Applications: Telecommunications: Ideal for professionals involved in the installation and maintenance of telephone systems, fiber optic cables, and other telecom-related work. Networking: Suitable for setting up and maintaining Ethernet networks (LANs), including cabling, installation of patch panels, connectors, and testing of cables. Troubleshooting: Perfect for diagnosing issues with network connections, ensuring proper wiring, and resolving connectivity problems. Home and Office Networks: Suitable for DIY network setups and maintenance of home or office network systems. Fiber Optic Cable Work: Works well for those handling fiber optic cables with the right precision tools for both stripping and installation. Advantages: Complete Tool Set: The kit includes all essential tools for telecom and networking, ensuring you are equipped for a variety of tasks. Professional Quality: The tools are built to high standards, ensuring durability and reliability for long-term use. Easy to Use: The tools are designed for ergonomics and comfort, making them simple to use, even for extended periods. Compact and Organized: The included carrying case keeps everything organized, making it easy to transport and access the tools. Cost-Effective: Offers great value for money, providing a full set of professional-grade tools at an affordable price for telecom and networking professionals. Conclusion: The Proskit PK-1938M1 Professional Telecom & Networking Tool Kit is an all-in-one solution for telecom professionals, network technicians, and DIY enthusiasts who require a set of high-quality tools for network installation, maintenance, and troubleshooting. With crimping tools, cable testers, punch-down tools, and cable cutters, this kit provides everything needed to ensure successful and efficient networking and telecom tasks. The ergonomic design, professional-grade quality, and compact storage make it an ideal toolset for both everyday use and complex installations. Whether you're working with Ethernet, telephone, or fiber optic cables, the Proskit PK-1938M1 toolkit is a reliable and cost-effective choice.

he Proskit 3PK-NT013 PC Cable Tester with Optional USB/1394 Test Port is a versatile and essential tool designed to test the integrity and functionality of various types of computer cables. This cable tester is specifically useful for IT professionals, technicians, and engineers who work with computer systems, ensuring that cables are functioning correctly and free of defects before they are used in critical installations or troubleshooting tasks. Key Features: Versatile Cable Testing: The Proskit 3PK-NT013 is capable of testing a variety of PC cables, including Ethernet (RJ45), USB, and 1394 (FireWire) cables. It allows users to quickly verify whether the cables are properly wired and functioning, making it a crucial tool for network installations, computer repairs, and IT maintenance. This multi-functional tester supports testing for common cable types, ensuring flexibility and wide-ranging use in different environments. USB/1394 Optional Test Ports: The USB and 1394 (FireWire) test ports are optional, meaning the tester can be equipped with specific connectors as needed for testing these types of cables. With these additional ports, the 3PK-NT013 is capable of checking USB cables (commonly used for connecting peripherals like printers, keyboards, and storage devices) and 1394 cables (used in devices like digital cameras, audio equipment, and external hard drives). This feature ensures comprehensive testing capabilities across various commonly used interfaces in modern computer and networking systems. Easy-to-Read LED Indicators: The tester is equipped with LED lights that provide visual feedback on the cable's status. Each cable is tested for proper wiring, and the LEDs will indicate whether the cable is functioning correctly or has any faults such as short circuits, incorrect wiring, or open circuits. This clear indication simplifies troubleshooting, enabling users to quickly identify which cables are suitable for use and which need repair or replacement. Compact and Portable Design: The Proskit 3PK-NT013 is designed to be compact and lightweight, making it easy to carry around and ideal for fieldwork. It fits comfortably in a tool kit, backpack, or drawer, ensuring that technicians always have it on hand when performing cable tests. Its small size doesn’t compromise its functionality, making it an excellent tool for on-the-go diagnostics. Efficient and Quick Testing: The tester allows for quick testing of multiple cables at once, making it an excellent time-saver for IT professionals who need to assess many cables in a short period. Whether it’s testing a batch of Ethernet cables or USB cords, this tester provides results instantly. The simple operation means that users don’t need to be experts in electronics to perform effective tests. It ensures that technicians can focus on other aspects of their work without getting bogged down by complex testing procedures. Durable Construction: The Proskit 3PK-NT013 is made from durable materials to withstand the wear and tear of regular use. Its robust build ensures longevity and reliability, even in demanding work environments. Whether used in workshops, offices, or on job sites, the tester is built to endure the conditions typical of IT and networking environments. Battery-Powered: The device operates on batteries, providing portable, standalone testing without needing to be plugged into a power source. This battery-powered feature allows for remote or on-location testing where power outlets may not be readily available. Some models may include an automatic power-off feature to conserve battery life when not in use, further improving efficiency. Applications: Network Cable Testing: Used by network engineers and technicians to test Ethernet (RJ45) cables, ensuring that they are correctly wired and capable of handling network signals. USB Cable Testing: Ideal for verifying the integrity of USB cables used for various peripherals such as external drives, printers, and smartphones. 1394 (FireWire) Cable Testing: Useful for testing 1394 cables that connect devices such as video cameras, audio equipment, and high-speed external storage devices. Fieldwork: The portable design makes it an essential tool for technicians who work on-site, enabling them to quickly verify cable connections during installation, maintenance, or repairs. Troubleshooting: Helps IT professionals and technicians to diagnose cable faults, such as wiring issues, shorts, or broken connections, that could cause network failures or connectivity problems. Advantages: Comprehensive Testing: The tester supports multiple cable types, making it versatile and suitable for a wide range of applications, from networking to peripheral connections. Clear Visual Indicators: The LED lights simplify troubleshooting by showing at a glance whether a cable is in working condition or needs attention. Portable and Lightweight: Its small size and lightweight design make it easy to carry, perfect for professionals who are frequently on the move or working in various locations. Quick and Efficient: The tester provides fast results, allowing for quick verification of multiple cables, saving time and increasing productivity. Durable: The sturdy construction ensures long-lasting use, making it a reliable tool for regular testing and diagnostics. Battery Operated: Its battery-powered design ensures convenience for on-location testing without the need for an electrical outlet. Conclusion: The Proskit 3PK-NT013 PC Cable Tester with Optional USB/1394 Test Port is an essential and versatile tool for IT professionals, network engineers, and technicians who work with computer and networking cables. With its ability to test a wide variety of cables, including Ethernet, USB, and 1394, it provides a comprehensive solution for cable testing and troubleshooting. The easy-to-read LED indicators, compact and portable design, and quick testing capabilities make this tool an invaluable asset for anyone involved in cable installation, maintenance, or repair. Whether you're in the field or in a workshop, the Proskit 3PK-NT013 ensures that your cables are reliable and ready for use, helping to prevent connectivity issues and ensure smooth operation in computer systems and networks.

Connector from square head to hexagonal. For 1/4“ hexagon bits as per DIN ISO 1173-C 6.3 and E 6.3 and Wera connection series 1 and 4. With quick-release chuck. Code inch inch mm 05003529001 1/4” 1/4“ 37.0 1/4” Zyklop adaptor with quick-release chuck for rapid bit change Suitable for 1/4" hex bits (Wera connecting series 1 and 4) Chrome vanadium steel Due to the ever-more confined working environment, space is becoming more and more an issue for the application of ratchets. Our product developers therefore intensively occupied themselves with the issue of confined working spaces, and Wera has now solved this problem. The extremely slim and robust Zyklop Metal ratchet with a long lever was what emerged. When the change in direction needs to be quick, the Zyklop Metal Switch ratchet is the right tool. When the socket must not get lost and a coincidental change of direction has to be avoided at all cost, the Zyklop Metal Push is the correct choice.

16-piece wrench set for bicycle applications with torque control including Wera Clique-Torque wrench A 5 (2.5-25 Nm) Sockets and bit sockets for the most popular screw profiles on road bikes, mountain bikes and e-bikes Easy setting and saving of the desired torque value with audible and tactile click when the scale value is reached (click 1) Safely quantified force: when the set value is reached, the torque wrench triggers audibly and noticeably (click 2) Precise to ± 4% as per DIN EN ISO 6789-1:2017-07. The 16-piece set from the screwdriving tool specialist Wera solves the most important screwdriving problems associated with bicycles, with reliable control of applied torque to protect sensitive components. With a click-torque wrench in the unmistakable Wera design.Very robust design with high accuracy as per DIN EN ISO 6789-1: 2017-07. Easy setting and saving of the default values. The audible and tactile snapping on reaching the scale values also facilitates the safe setting of the desired torque values. The robust release mechanism guarantees a clearly audible and tactile trigger signal when the set torque is reached. For clockwise torque-control and with a reversible 45-tooth ratchet. The torque wrench is extremely space-saving and supplemented with accessories that are suitable for the torque range and adapted to the most common screwed connections on bicycles; in a robust, surface-friendly textile box. Included are: Click Torque A 5, 1/4“, 2.5 - 25 Nm, 4 sockets with 1/4” drive, 7 Hex Plus hexagon bit sockets and 4 TORX® bit sockets. Sockets and bit sockets with “Take it easy” tool finder with colour coding by size - for easy and quick location of the required tool. Bit sockets with holding function for extra comfortable screwdriving without the screw falling off the tool. Incredibly compact arrangement for a lot of tools in a small space. Textile box with very high robustness and longevity. Additional surface protection through the textile outer material. Low weight and volume for easier mobility. Bit sockets with all the benefits of Wera bit technology such as fitting accuracy, wear resistance and concentric run-out properties Set contents: Click-Torque A 5: 05075604001 1 x 1/4" x 2.5-25 Nm 8767 A: 05003390001 1 x TX 10 x 28 mm 05003391001 1 x TX 20 x 28 mm 05003392001 1 x TX 25 x 28 mm 05003393001 1 x TX 30 x 28 mm K240: 1 x 50 x 240 mm 8790 HMA: 05003509001 1 x 10 x 23 mm 05003512001 1 x 13 x 23 mm 05003513001 1 x 14 x 23 mm 05003499001 1 x 15 x 23 mm 8740 A HF: 05003332001 1 x 3 x 28 mm 05003333001 1 x 4 x 28 mm 05003335001 1 x 5 x 28 mm 05003336001 1 x 5 x 100 mm 05003337001 1 x 6 x 28 mm 05003338001 1 x 6 x 100 mm 05003339001 1 x 8 x 28 mm

Premium Wera Micro insert wrench for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro nutsetter for hex head screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Anti-roll feature and rotating cap for rapid twisting E.g. for electricians, opticians, precision mechanics, jewellers or IT hardware fitters Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Kraftform Micro handle Multi-component screwdriver handle for ergonomic working. The refined screwdriver for electronics technicians The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone The fast-turning zone just below the rotating cap allows rapid spinning. Take it easy Tool Finder Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Applications Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fitters and model-makers Code mm inch mm mm mm inch 05118110001 2.0 - 60 97 5.7 2 3/8“ 05118112001 2.5 - 60 97 5.7 2 3/8” 05118114001 3.0 - 60 97 5.7 2 3/8“ 05118116001 3.2 - 60 97 5.7 2 3/8” 05118118001 3.5 - 60 97 5.7 2 3/8“ 05118122001 4.5 - 60 97 6.4 2 3/8” 05118124001 5.0 - 60 97 7.0 2 3/8“ 05345281001 6.0 - 60 97 8.5 2 3/8” 05118108001 1.5 - 60 97 5.7 2 3/8“ 05118109001 1.8 - 60 97 5.7 2 3/8”