As installation spaces become increasingly confined, it remains necessary that tools enable users to work successfully. Narrow spaces require additional placement points of the tool, to allow screws to be accessed and actuated. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be “taken” every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With Take it easy tool finder: colour coding by size. The Joker pouches are suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end “takes” the screw every 15° Slim ring side with 15° crank Suitable for docking with the Wera 2go system For very tight spaces The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be “accessed” every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Joker 6003: For return angles of less than 30° Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. Double-hex geometry The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. Joker 6003: Tilted ring side The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). Suitable for docking with the Wera 2go system The Joker pouches are suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back. Set contents: 05020231001 6003 Joker Combination wrench 05020200001 1x 8 x 115 mm 05020201001 1x 10 x 125 mm 05020202001 1x 11 x 135 mm 05020203001 1x 12 x 148 mm 05020204001 1x 13 x 160 mm 05020205001 1x 14 x 167 mm 05020206001 1x 15 x 174 mm 05020207001 1x 16 x 182 mm 05020208001 1x 17 x 190 mm 05020209001 1x 18 x 210 mm 05020210001 1x 19 x 230 mm Hook and Loop Fastener Strip 240 1x 50x240 mm

Ratchets and screws in a Kraftform Kompakt format. These drop-forged, full-steel ratchets, Zyklop Mini 1 and 2, combine filigree design with incredible robustness. For particularly rapid screwdriving in confined working situations. Zyklop Mini 1 or Zyklop Mini 2 can be used whenever screwdriving with power tools or conventional hand tools is unfeasible for lack of space. 1 bit ratchet Zyklop Mini 1; suitable for the take-up of bits with ¼“ hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 and Wera connecting series 1 and 4; also possible to use ¼” sockets by attaching the Wera adaptor 870/1. 1 socket ratchet Zyklop Mini 2; suitable for the direct attachment of Wera Zyklop special sockets 8790 FA. Drop-forged, full-steel ratchet design For screwdriving in very confined working situations Zyklop sockets 8790 FA for direct insertion in the Zyklop Mini 2 Bit holder, 9 sockets, 14 bits and 1 adaptor In robust textile box The Zyklop Mini Ratchets For all difficult-to-access applications. The Zyklop Mini The fine tooth mechanism, with its 60 teeth, allows a small return angle of only 6° - ideal for precision work Rapid screwdriving High working speeds can be attained with the Zyklop Mini bit ratchet. The thumb wheel is important, enabling more rapid screwdriving, and the lever of the Zyklop Mini only needs to be used for the final tightening of the screw. Slim design Its slim design makes it ideal for all particularly confined working situations. Is such a small tool sufficiently resilient? The Zyklop Mini 1 can withstand a torque up to 65 Nm. That is far more power than can normally be transferred to such a small tool. What parts can be connected to the Zyklop Mini 1? Bits and sockets. Bits can be connected directly. However, a holder can be connected first and then the bit can be attached to this. This then serves as an extension with a free-turning sleeve. An adaptor e.g. Wera 870/1 is needed for sockets - ¼“ hexagonal on a square drive (included in the Bit-Check and with the individual Zyklop Mini 1 in the set). Zyklop Mini 2 The Zyklop Mini 2 is suitable for the direct attachment of the special Wera Zyklop sockets 8790 FA. These sockets feature a very low height, ideal for confined working spaces. Set Contents : 05135918001 8001 A Bit Ratchet ¼” 1x 1/4“x87 mm 8005 Zyklop Mini 2 Ratchet 05003660001 1x 107 mm 813 Bitholding screwdriver 05051274001 1x 1/4” x 78 mm 870/1 Adaptor 05136000001 1x 1/4“ x 25 mm 851/1 Z bits 05072070001 1x PH 1 x 25 mm 05072072001 1x PH 2 x 25 mm 855/1 Z bits 05072080001 1x PZ 1 x 25 mm 05072082001 1x PZ 2 x 25 mm 867/1 TORX bits 05066485001 1x TX 10 x 25 mm 05066486001 1x TX 15 x 25 mm 05066487001 1x TX 20 x 25 mm 05066488001 1x TX 25 x 25 mm 05066490001 1x TX 30 x 25 mm 05066491001 1x TX 40 x 25 mm 840/1 Z bits 05056315001 1x 3 x 25 mm 05056320001 1x 4 x 25 mm 05056325001 1x 5 x 25 mm 05056330001 1x 6 x 25 mm 8790 FA Zyklop socket with 1/4” and Hexagon 11 drive 05003665001 1x 4 mm 05003667001 1x 5 mm 05003668001 1x 5.5 mm 05003669001 1x 6 mm 05003670001 1x 7 mm 05003675001 1x 8 mm 05003690001 1x 10 mm 05003684001 1x 12 mm 05003685001 1x 13 mm Hook and Loop Fastener Strip 120 1x 120x50 mm

For socket head screws Ductile and tough for hard materials Hex-Plus allows socket head screws to live longer 1/4“ hexagon drive (Wera connecting series 4) Suitable for AEG, ARO, Atlas-Copco, Biax, Black & Decker, Bosch, Buckeye Tools etc. Tough viscous Wera bits for hexagon socket screws for universal use. The HexPlus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. 1/4”hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

16-piece wrench set for bicycle applications with torque control including Wera Clique-Torque wrench A 5 (2.5-25 Nm) Sockets and bit sockets for the most popular screw profiles on road bikes, mountain bikes and e-bikes Easy setting and saving of the desired torque value with audible and tactile click when the scale value is reached (click 1) Safely quantified force: when the set value is reached, the torque wrench triggers audibly and noticeably (click 2) Precise to ± 4% as per DIN EN ISO 6789-1:2017-07. The 16-piece set from the screwdriving tool specialist Wera solves the most important screwdriving problems associated with bicycles, with reliable control of applied torque to protect sensitive components. With a click-torque wrench in the unmistakable Wera design.Very robust design with high accuracy as per DIN EN ISO 6789-1: 2017-07. Easy setting and saving of the default values. The audible and tactile snapping on reaching the scale values also facilitates the safe setting of the desired torque values. The robust release mechanism guarantees a clearly audible and tactile trigger signal when the set torque is reached. For clockwise torque-control and with a reversible 45-tooth ratchet. The torque wrench is extremely space-saving and supplemented with accessories that are suitable for the torque range and adapted to the most common screwed connections on bicycles; in a robust, surface-friendly textile box. Included are: Click Torque A 5, 1/4“, 2.5 - 25 Nm, 4 sockets with 1/4” drive, 7 Hex Plus hexagon bit sockets and 4 TORX® bit sockets. Sockets and bit sockets with “Take it easy” tool finder with colour coding by size - for easy and quick location of the required tool. Bit sockets with holding function for extra comfortable screwdriving without the screw falling off the tool. Incredibly compact arrangement for a lot of tools in a small space. Textile box with very high robustness and longevity. Additional surface protection through the textile outer material. Low weight and volume for easier mobility. Bit sockets with all the benefits of Wera bit technology such as fitting accuracy, wear resistance and concentric run-out properties Set contents: Click-Torque A 5: 05075604001 1 x 1/4" x 2.5-25 Nm 8767 A: 05003390001 1 x TX 10 x 28 mm 05003391001 1 x TX 20 x 28 mm 05003392001 1 x TX 25 x 28 mm 05003393001 1 x TX 30 x 28 mm K240: 1 x 50 x 240 mm 8790 HMA: 05003509001 1 x 10 x 23 mm 05003512001 1 x 13 x 23 mm 05003513001 1 x 14 x 23 mm 05003499001 1 x 15 x 23 mm 8740 A HF: 05003332001 1 x 3 x 28 mm 05003333001 1 x 4 x 28 mm 05003335001 1 x 5 x 28 mm 05003336001 1 x 5 x 100 mm 05003337001 1 x 6 x 28 mm 05003338001 1 x 6 x 100 mm 05003339001 1 x 8 x 28 mm

Many tools in a minimum of space. The sorting according to drive and size allows rapid accessing of the bits. The Wera Mini ratchet: drop-forged, full-steel design. Fine-pitched mechanism with 60 teeth that allows a small return angle of only 6° for precise work. Simple left/right switchover. Ergonomically-designed ratchet head and lever. 1/4“ Mini ratchet and tough viscous bits Ideal for working in confined spaces Tough viscous bits for universal use Use of 1/4” sockets also possible with the Wera adaptor 870/1 In handy and robust Bit-Check Zyklop Mini Set contents: 8001 A 05073999001 1 x 1/4" x 87 mm 851/1 Z PH 05072070001 1 x PH 1 x 25 mm 05072072001 1 x PH 2 x 25 mm 855/1 Z PZ 05072080001 1 x PZ 1 x 25 mm 05072082001 1 x PZ 2 x 25 mm 867/1 TORX® 05066486001 1 x TX 15 x 25 mm 05066487001 1 x TX 20 x 25 mm 05066488001 1 x TX 25 x 25 mm 840/1 Z Hex-Plus 05056320001 1 x 4 x 25 mm 05056325001 1 x 5 x 25 mm

Article description Ratchet, bits and sockets in a minimum of space - as compact as it gets. Simple operation, even with just one hand, in confined working spaces. Drop-forged, full-steel design and fine-pitched mechanism with 60 teeth that allows a small return angle of 6° for precise working. Easy left/right switchover. Ergonomically designed ratchet head and lever. Suitable for ¼“ bit and socket take-up. The use of ¼” sockets is also possible with the Wera adaptor 870/1. Tough viscous bits for universal use. Manual and power tool socket insert (ISO 2725-Part 3) by Wera allows applications both in manual as well as power tools. Take it easy Tool Finder with colour coding according to size - for simple and rapid accessing of the required tool. Featuring a good grip to allow easy pick-up even with oily hands. Ball stop groove, for hex head bolts and nuts; chrome vanadium steel, matt chrome-plated. 1/4“ bit ratchet, tough viscous bits, Rapidaptor holder, adaptor and 1/4” sockets Ideal for working in confined spaces Tough viscous bits for universal use Use of 1/4“ sockets also possible with the Wera adaptor 870/1 Take it easy tool finder: colour coding according to profile and size Zyklop Mini The Zyklop Mini Ratchets For all difficult-to-access applications. The Zyklop Mini The fine tooth mechanism, with its 60 teeth, allows a small return angle of only 6° - ideal for precision work. Simple direction change Simple switching between left/right operations. Rapid screwdriving High working speeds can be attained with the Zyklop Mini bit ratchet. The thumb wheel is important, enabling more rapid screwdriving, and the lever of the Zyklop Mini only needs to be used for the final tightening of the screw. Slim design Its slim design makes it ideal for all particularly confined working situations. Take it easy tool finder system Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). Is such a small tool sufficiently resilient? The Zyklop Mini 1 can withstand a torque up to 65 Nm. That is far more power than can normally be transferred to such a small tool. Set contents: 870/1 051360000011) 1 x 1/4” x 25 mm 889/4/1 K 05052502001 1 x 1/4" x 50 mm 851/1 TZ PH 05056505001 1 x PH 1 x 25 mm 05056510001 1 x PH 2 x 25 mm 05056525001 1 x PH 3 x 25 mm 867/1 TZ TORX® 05066305001 1 x TX 10 x 25 mm 05066308001 1 x TX 15 x 25 mm 05066310001 1 x TX 20 x 25 mm 05066312001 1 x TX 25 x 25 mm 05066315001 1 x TX 30 x 25 mm 05066320001 1 x TX 40 x 25 mm 867/1 Z TORX® BO 05066500001 1 x TX 10 x 25 mm 05066505001 1 x TX 15 x 25 mm 05066510001 1 x TX 20 x 25 mm 05066515001 1 x TX 25 x 25 mm 05066525001 1 x TX 30 x 25 mm 800/1 TZ 05056225001 1 x 1 x 5.5 x 25 mm 840/1 Z Hex-Plus 05056315001 1 x 3 x 25 mm 05056320001 1 x 4 x 25 mm 05056325001 1 x 5 x 25 mm 05056330001 1 x 6 x 25 mm 05056335001 1 x 8 x 25 mm 860/1 XZN 05066150001 1 x M 4 x 25 mm 05066155001 1 x M 5 x 25 mm 05066160001 1 x M 6 x 25 mm 05066165001 1 x M 8 x 25 mm 8790 HMA 05003504001 1 x 5.5 x 23 mm 05003505001 1 x 6 x 23 mm 05003506001 1 x 7 x 23 mm 05003507001 1 x 8 x 23 mm 05003509001 1 x 10 x 23 mm 05003511001 1 x 12 x 23 mm 05003512001 1 x 13 x 23 mm

High quality bits with combination profile Phillips/slotted. In electrical applications screws with mixed geometry (slotted and Phillips cross-recess) are quite common. Bits having a PlusMinus profile are optimum for addressing these screws. Tough viscous for universal use. ¼“ hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For PlusMinus screws (combination profile Phillips/slotted) Also for jobs on terminal blocks, fuse boxes, switches and relays Tough for hard materials 1/4” hexagon drive (Wera connecting series 4) Tough bits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. Code mm inch mm 05059720001 # 1 70 2 3/4“ 4.5 05059721001 # 2 70 2 3/4” 6

Wera torque screwdriver. Dependable protection against electrostatic energy and associated damage. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with ¼“ hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftfrom ESD torque screwdriver with Rapidadptor Quick-release chuck Multi-component kraftfrom handle for fast and low fatigue working Hexagonal anti-roll feature against rolling away Rapidaptor quick-release chuck for bits with 1/4” hex head drive Adjustable Torque Screwdrivers Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. Wera ESD Tools The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. Setting with Speed Simple setting of the required torque by hand. Easy-to-read Easy-to-read scale value. Attachable magnifying glass Articles 7430, 7431 and 7432 all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. Measurement accuracy Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque Unlimited torque for loosening seized screws. Versatile Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly.

Connector from square head to hexagonal. For 1/4“ hexagon bits as per DIN ISO 1173-C 6.3 and E 6.3 and Wera connection series 1 and 4. With quick-release chuck. Code inch inch mm 05003529001 1/4” 1/4“ 37.0 1/4” Zyklop adaptor with quick-release chuck for rapid bit change Suitable for 1/4" hex bits (Wera connecting series 1 and 4) Chrome vanadium steel Due to the ever-more confined working environment, space is becoming more and more an issue for the application of ratchets. Our product developers therefore intensively occupied themselves with the issue of confined working spaces, and Wera has now solved this problem. The extremely slim and robust Zyklop Metal ratchet with a long lever was what emerged. When the change in direction needs to be quick, the Zyklop Metal Switch ratchet is the right tool. When the socket must not get lost and a coincidental change of direction has to be avoided at all cost, the Zyklop Metal Push is the correct choice.