The Proskit MT-7063 PoE & LAN Cable Tester is a versatile and essential tool designed for testing Ethernet cables (LAN) as well as Power over Ethernet (PoE) cables. This tool is invaluable for network professionals, electricians, and technicians who need to verify the performance and integrity of Ethernet cables, especially in environments where PoE technology is used to supply power to devices over a single Ethernet cable. Key Features: PoE (Power over Ethernet) Testing: The MT-7063 can test Power over Ethernet (PoE) cables to determine whether PoE power is being transmitted through the cable. This is crucial for verifying installations of devices that rely on PoE, such as IP cameras, VoIP phones, wireless access points, and other network devices that require both power and data through the same cable. The tester can detect whether PoE voltage is present, allowing users to verify that the cables are correctly providing power to connected devices. LAN Cable Testing: The tester is designed to test standard Ethernet cables (including Cat 5, Cat 5e, Cat 6, and Cat 6a), ensuring proper wiring and functionality. It checks whether the cables are wired correctly according to the T568A or T568B wiring standards. This is important for ensuring that network cables are wired in the correct sequence for optimal data transmission. Wiremap (Wiring Integrity): The MT-7063 is equipped with the ability to check the wiremap of the Ethernet cable. This includes verifying that all wires are properly connected, in the correct order, and ensuring there are no open circuits or short circuits. If any wiring issues are found, the tester will indicate the specific problem using LED lights. LED Indicators: The tester uses LED lights to show the status of each individual wire within the Ethernet cable. If the cable is wired correctly, green LEDs light up for each corresponding wire. If there is a problem (e.g., miswiring, open circuit, or short circuit), the relevant LED will light red or will be inactive, alerting the user to the specific issue. Short Circuit and Open Circuit Detection: The MT-7063 detects both short circuits and open circuits in Ethernet cables. A short circuit happens when two wires are mistakenly connected, while an open circuit occurs when a wire is not connected at all. Identifying these issues is crucial for ensuring that the cable will function properly in a network. Remote Unit for Long Cable Testing: The tester includes a remote unit, allowing for testing of long cables without having to have both ends near the main tester. This is particularly useful when testing cables that are already installed or are difficult to access fully. The remote unit is often designed for easy plug-in and quick testing. Clear LCD Display: The tester features a clear LCD display that provides visual feedback on whether the Ethernet cable is wired correctly and whether PoE power is detected. This display helps users interpret test results quickly and accurately. Compact and Portable Design: The Proskit MT-7063 is compact and lightweight, making it portable and easy to carry around for fieldwork. Its small size ensures that it can easily fit into a toolbag or be carried around on-site for easy access and use. Battery-Powered: The tester is powered by standard batteries, which ensures portability and ease of use in locations without access to an external power source. Its low power consumption helps extend battery life, making it ideal for frequent testing. Durability: Built with durability in mind, the MT-7063 is designed to withstand regular use in rugged environments, providing reliability for technicians who work in different locations or on different types of network setups. Easy to Use: The Proskit MT-7063 is designed to be simple to operate. You just need to plug one end of the Ethernet cable into the tester and the other end into the remote unit (if applicable). The tester will quickly display the results on the screen or via LED indicators. Applications: PoE Verification: Ideal for checking whether Power over Ethernet (PoE) is being properly supplied through Ethernet cables to power devices like IP cameras, wireless access points, and phones. Cable Troubleshooting: Useful for identifying wiring issues in Ethernet cables, such as miswiring, open circuits, shorts, or incorrect configurations. Network Installations: Perfect for verifying the integrity of Ethernet cables during the installation of networking equipment and ensuring that the wiring standards (T568A/B) are followed. IT Professionals: A must-have for IT technicians who are involved in the setup, maintenance, and troubleshooting of network systems. Home and Office Networking: Great for testing Ethernet and PoE cables in small-to-medium office or home network installations. Field Testing: Compact and easy to carry, it is an ideal tool for field technicians who need to perform quick tests on network cables during installations or maintenance. Summary: The Proskit MT-7063 PoE & LAN Cable Tester is a highly functional, easy-to-use tool designed for testing Ethernet cables and Power over Ethernet (PoE) cables. With its PoE detection, wiremap checking, short and open circuit detection, and clear LCD display, this tester provides reliable performance for professionals working with network cables. Its compact size, remote testing functionality, and LED indicators make it a versatile tool for field use and quick diagnostics in a wide range of network-related tasks. Whether you are installing, maintaining, or troubleshooting Ethernet and PoE cables, the MT-7063 offers the features necessary to ensure your network is performing optimally. You said: Proskit MT-7029 Noise-Filtering NetworkPoE Toner & Probe ChatGPT said: ChatGPT The Proskit MT-7029 Noise-Filtering Network PoE Toner & Probe is a specialized tool designed for testing and troubleshooting network cables, including those used for Power over Ethernet (PoE) systems. This toner and probe kit is an essential tool for network professionals, electricians, and IT technicians, especially when dealing with cable identification and PoE-enabled devices in complex network environments. Key Features: Noise-Filtering Capability: One of the standout features of the Proskit MT-7029 is its noise-filtering functionality. This allows the toner and probe to detect and trace network cables even in environments with high levels of electrical noise or interference. It ensures that the signals being transmitted by the toner are clear and precise, making it easier to identify cables and troubleshoot network issues. PoE Detection: The MT-7029 is specifically designed to work with Power over Ethernet (PoE) cables. It can detect whether PoE voltage is present on the cable, allowing users to confirm that both power and data are being transmitted through a single Ethernet cable. This is particularly important for installations involving PoE-powered devices like IP cameras, VoIP phones, and wireless access points. By verifying the presence of PoE power, users can quickly determine whether a cable is capable of powering devices in addition to transmitting data. Toner and Probe Design: The toner is the active part of the tool that sends a signal through the network cable, allowing the user to trace its path. The probe detects the signal emitted by the toner and produces an audible tone, allowing the technician to locate the cable without needing to access both ends of the wire. The signal strength and clarity of the tone help guide the user to the correct cable, ensuring efficient and accurate cable identification. Cable Tracing: This tool is ideal for cable tracing, allowing technicians to trace cables even when they are bundled together or hidden behind walls, ceilings, or other obstacles. The noise-filtering ability ensures that the signal can be detected and traced clearly, without interference from other nearby cables or electrical systems. Clear Audio Tone: The probe produces a clear, audible tone that indicates the presence of the toner’s signal in the cable. The volume of the tone can often be adjusted, making it easier to identify the cable's location even in noisy environments. A louder tone indicates that the probe is closer to the signal source, helping users pinpoint the cable. Multiple Applications: Cable Identification: The MT-7029 can be used to identify the specific path of individual cables in a network setup, making it useful for labeling or troubleshooting. PoE Troubleshooting: It helps verify that cables in PoE installations are delivering the proper power and are correctly wired, ensuring that PoE-powered devices will function properly. Network Maintenance: The tool is helpful for network administrators and technicians who need to troubleshoot or modify network wiring, whether in commercial or residential settings. Field Use: Due to its portability and easy-to-use design, the MT-7029 is a perfect tool for field technicians working in different locations, especially for large network installations where finding and diagnosing cable problems can be time-consuming. Adjustable Sensitivity: The probe comes with adjustable sensitivity settings, allowing users to fine-tune the device for more precise cable identification. This is particularly useful in large installations or dense cable environments, where other cables might interfere with the signal. Ergonomic Design: Both the toner and probe are designed for ergonomics, making them easy to handle and use for extended periods. The user-friendly interface and design ensure minimal fatigue during use, which is especially important during long troubleshooting sessions. Durable Construction: The MT-7029 is built to withstand the rigors of daily use in professional settings. Its durable casing protects the internal electronics from damage, ensuring a long service life even under tough working conditions. Battery-Powered: The toner and probe are powered by standard batteries, ensuring portability and easy use in locations where external power sources may not be readily available. Applications: PoE Network Installations: Ideal for testing and troubleshooting PoE cables, ensuring that both power and data are transmitted properly to connected devices. Cable Tracing in Complex Installations: Useful for tracing and identifying network cables in environments where multiple cables are bundled together, in cabinets, or behind walls. Network Troubleshooting: Essential for identifying faulty cables, determining the correct path for cable connections, and verifying proper PoE power delivery in network setups. Field Work: Compact and portable, this tool is an excellent choice for field technicians working in various locations to diagnose and resolve network cable issues. Infrastructure Maintenance: Perfect for technicians maintaining or upgrading network infrastructures in commercial and residential buildings, helping them identify the correct cables without making unnecessary disconnections. Summary: The Proskit MT-7029 Noise-Filtering Network PoE Toner & Probe is a highly effective tool designed for cable tracing and PoE testing. With its noise-filtering capabilities, PoE voltage detection, and adjustable sensitivity, it provides accurate and clear results for network professionals working with Ethernet and PoE systems. The ergonomic design, battery-powered convenience, and clear audio signals make it a reliable choice for field technicians and IT professionals looking to troubleshoot, identify, and verify network cables in diverse environments. Whether for PoE verification, cable tracing, or network maintenance, the Proskit MT-7029 is an essential tool for ensuring the functionality and integrity of network installations.

The Proskit MT-7063 PoE & LAN Cable Tester is a versatile and essential tool designed for testing Ethernet cables (LAN) as well as Power over Ethernet (PoE) cables. This tool is invaluable for network professionals, electricians, and technicians who need to verify the performance and integrity of Ethernet cables, especially in environments where PoE technology is used to supply power to devices over a single Ethernet cable. Key Features: PoE (Power over Ethernet) Testing: The MT-7063 can test Power over Ethernet (PoE) cables to determine whether PoE power is being transmitted through the cable. This is crucial for verifying installations of devices that rely on PoE, such as IP cameras, VoIP phones, wireless access points, and other network devices that require both power and data through the same cable. The tester can detect whether PoE voltage is present, allowing users to verify that the cables are correctly providing power to connected devices. LAN Cable Testing: The tester is designed to test standard Ethernet cables (including Cat 5, Cat 5e, Cat 6, and Cat 6a), ensuring proper wiring and functionality. It checks whether the cables are wired correctly according to the T568A or T568B wiring standards. This is important for ensuring that network cables are wired in the correct sequence for optimal data transmission. Wiremap (Wiring Integrity): The MT-7063 is equipped with the ability to check the wiremap of the Ethernet cable. This includes verifying that all wires are properly connected, in the correct order, and ensuring there are no open circuits or short circuits. If any wiring issues are found, the tester will indicate the specific problem using LED lights. LED Indicators: The tester uses LED lights to show the status of each individual wire within the Ethernet cable. If the cable is wired correctly, green LEDs light up for each corresponding wire. If there is a problem (e.g., miswiring, open circuit, or short circuit), the relevant LED will light red or will be inactive, alerting the user to the specific issue. Short Circuit and Open Circuit Detection: The MT-7063 detects both short circuits and open circuits in Ethernet cables. A short circuit happens when two wires are mistakenly connected, while an open circuit occurs when a wire is not connected at all. Identifying these issues is crucial for ensuring that the cable will function properly in a network. Remote Unit for Long Cable Testing: The tester includes a remote unit, allowing for testing of long cables without having to have both ends near the main tester. This is particularly useful when testing cables that are already installed or are difficult to access fully. The remote unit is often designed for easy plug-in and quick testing. Clear LCD Display: The tester features a clear LCD display that provides visual feedback on whether the Ethernet cable is wired correctly and whether PoE power is detected. This display helps users interpret test results quickly and accurately. Compact and Portable Design: The Proskit MT-7063 is compact and lightweight, making it portable and easy to carry around for fieldwork. Its small size ensures that it can easily fit into a toolbag or be carried around on-site for easy access and use. Battery-Powered: The tester is powered by standard batteries, which ensures portability and ease of use in locations without access to an external power source. Its low power consumption helps extend battery life, making it ideal for frequent testing. Durability: Built with durability in mind, the MT-7063 is designed to withstand regular use in rugged environments, providing reliability for technicians who work in different locations or on different types of network setups. Easy to Use: The Proskit MT-7063 is designed to be simple to operate. You just need to plug one end of the Ethernet cable into the tester and the other end into the remote unit (if applicable). The tester will quickly display the results on the screen or via LED indicators. Applications: PoE Verification: Ideal for checking whether Power over Ethernet (PoE) is being properly supplied through Ethernet cables to power devices like IP cameras, wireless access points, and phones. Cable Troubleshooting: Useful for identifying wiring issues in Ethernet cables, such as miswiring, open circuits, shorts, or incorrect configurations. Network Installations: Perfect for verifying the integrity of Ethernet cables during the installation of networking equipment and ensuring that the wiring standards (T568A/B) are followed. IT Professionals: A must-have for IT technicians who are involved in the setup, maintenance, and troubleshooting of network systems. Home and Office Networking: Great for testing Ethernet and PoE cables in small-to-medium office or home network installations. Field Testing: Compact and easy to carry, it is an ideal tool for field technicians who need to perform quick tests on network cables during installations or maintenance. Summary: The Proskit MT-7063 PoE & LAN Cable Tester is a highly functional, easy-to-use tool designed for testing Ethernet cables and Power over Ethernet (PoE) cables. With its PoE detection, wiremap checking, short and open circuit detection, and clear LCD display, this tester provides reliable performance for professionals working with network cables. Its compact size, remote testing functionality, and LED indicators make it a versatile tool for field use and quick diagnostics in a wide range of network-related tasks. Whether you are installing, maintaining, or troubleshooting Ethernet and PoE cables, the MT-7063 offers the features necessary to ensure your network is performing optimally.

The Proskit MT-7064 PoE & LAN Cable Tester is an advanced, multifunctional cable tester designed for testing Ethernet (LAN) cables as well as Power over Ethernet (PoE) cables. It is an essential tool for network professionals, electricians, and technicians who need to verify the integrity and performance of network cables, especially in environments where PoE technology is used for powering devices like IP cameras, wireless access points, and VoIP phones. Key Features: PoE (Power over Ethernet) Testing: The PoE testing capability is one of the standout features of the Proskit MT-7064. It can detect whether Power over Ethernet (PoE) is present on a cable, which is essential for troubleshooting and verifying installations where both power and data are transmitted through a single Ethernet cable. The tester can check if the cable is capable of delivering power (i.e., whether PoE voltage is present), ensuring that devices powered by PoE will receive adequate voltage and current for proper operation. LAN Cable Testing: The MT-7064 tests standard Ethernet cables (such as Cat 5, Cat 5e, Cat 6, and Cat 6a) for correct wiring. It helps identify any issues in the wiring configuration, such as incorrect pinouts, miswiring, shorts, and open circuits. The tester checks the cable for proper wiring configurations, including T568A and T568B standards. LED Indicators for Cable Status: The tester is equipped with LED indicators that display the status of each individual wire in the Ethernet cable. Green LEDs typically indicate correct wiring, while red LEDs or a lack of illumination signal issues like miswiring or open circuits. This provides users with clear visual feedback, helping them pinpoint exactly where problems exist in the cable. Multifunctional Testing Capabilities: In addition to basic cable testing, the MT-7064 is capable of more advanced testing, such as detecting: PoE Voltage and Power: Checking whether PoE voltage is being supplied to the cable. Data Transmission Integrity: Verifying that the Ethernet cable supports proper data transmission and that no wires are missing or incorrectly connected. Short Circuits and Open Circuits: The tester identifies short circuits and open circuits in the cable, helping to quickly troubleshoot faulty connections. Correct Cable Configuration: Verifies the correctness of the cable configuration (T568A/B) for network standards. Remote Testing: The MT-7064 comes with a remote unit, which allows users to test long cables without needing to have both ends near the main tester. This remote unit is particularly useful in large installations or when cables are already deployed and connected. Compact and Easy-to-Use Design: The compact size and ergonomic design of the Proskit MT-7064 make it highly portable and easy to handle. Its simple layout ensures that users can easily navigate through the various testing modes with minimal setup. It’s designed for fast, on-the-go testing, ideal for technicians who need to test multiple cables during a workday. LCD Display: The tester features a clear LCD display that provides visual feedback on the PoE voltage and cable testing results. It allows the user to see information such as whether the cable is functioning properly, whether PoE power is present, and any errors in wiring configuration. Battery-Powered: The tester is powered by standard batteries, making it portable and suitable for field use where power sources may not be readily available. It is designed for low power consumption to maximize battery life during long testing sessions. Durability: The MT-7064 is built with durable materials to withstand the wear and tear of regular field use. It is compact yet sturdy, making it a reliable tool for technicians working in different environments. Overload Protection: The tester is designed with overload protection to safeguard against damage in case of incorrect usage or testing beyond the recommended limits. Applications: Network Installations: Ensures that Ethernet and PoE cables are correctly wired and capable of delivering both data and power for devices. Troubleshooting: Ideal for diagnosing issues with Ethernet cables, identifying faulty cables or incorrect wiring configurations, and checking for PoE power delivery. IT and Telecommunications: Essential for network technicians and IT professionals setting up or maintaining networks, especially those that rely on PoE for powering devices like security cameras or access points. Home and Office Networking: Useful for home and office network installations, where both data and power need to be transmitted through a single cable. Field Testing: Perfect for on-site testing and troubleshooting of pre-installed cables or cables in large, complex networks. Summary: The Proskit MT-7064 PoE & LAN Cable Tester is a versatile, multifunctional tool designed to test both Ethernet cables and Power over Ethernet (PoE) cables. With its PoE voltage detection, cable wiring verification, and ability to identify shorts and open circuits, it’s a must-have tool for anyone working with network cables. The compact design, remote testing capability, and LCD display ensure ease of use and portability, making it an ideal choice for network professionals, electricians, and technicians. Whether you are installing new network equipment or troubleshooting existing cables, the MT-7064 helps ensure that your Ethernet and PoE cables are correctly wired and ready for optimal performance.

The Proskit MT-7031 Mini LAN Cable Tester is a compact, portable device designed to quickly and accurately test Ethernet cables (LAN cables) to ensure they are wired correctly and functioning properly. This tool is essential for anyone working with network setups, such as IT professionals, electricians, or technicians. It allows users to verify cable integrity, check wiring configurations, and troubleshoot connection issues in a variety of networking environments. Key Features: Compact and Portable Design: The Proskit MT-7031 is designed to be small and lightweight, making it highly portable and easy to carry around for on-the-go testing. It’s ideal for use in tight spaces or when conducting fieldwork, ensuring ease of transport in toolkits or pockets. Ethernet Cable Testing: The MT-7031 is specifically designed to test Ethernet cables, including Cat 5, Cat 5e, Cat 6, and other similar LAN cables. It ensures the cable is wired according to the correct standard, such as T568A or T568B, and can detect common wiring issues. Testing for Correct Wiring: The device checks the wiring sequence of the cable to ensure that all wires are correctly connected. This helps identify if there are issues with the wiring, such as incorrect pinouts or open circuits, which could lead to network connection problems. The tester indicates whether the cable is properly wired for straight-through or crossover configuration. LED Indicators: The tester features LED indicators that visually display the wiring status of each individual wire inside the Ethernet cable. The lights show whether the cable is properly wired, helping users to quickly diagnose problems. Green lights usually indicate correct wiring. Red lights or no lights may indicate miswiring or open connections, signaling where the issue lies. Short Circuit and Open Circuit Detection: The Proskit MT-7031 can detect short circuits and open circuits within the cable, which is vital for ensuring a reliable network connection. If any wire is not connected or is incorrectly wired, the tester will indicate the specific problem. Simple and Easy to Use: The tester is straightforward to use, requiring no special knowledge or complex settings. Simply plug one end of the LAN cable into the main tester and the other end into the remote unit (which may be a detachable unit in some models). The tester will then provide instant feedback on the status of the cable. Remote Unit (Optional): In some versions of the MT-7031, the tester may include a remote unit that allows you to test cables without needing both ends to be near the main tester. This is useful when testing long cables or in large installations where the two ends of the cable are far apart. Battery-Powered: The Proskit MT-7031 operates on standard battery power, ensuring portability and ease of use in locations where a power source may not be readily available. It’s designed to conserve power, extending battery life during testing. Wide Application: This tester is ideal for a variety of environments, including: Network Installations: Ensuring proper wiring of Ethernet cables in network infrastructure. Home and Office Networking: Verifying LAN cables for proper connection in homes, offices, or small businesses. Troubleshooting: Helping network administrators and technicians quickly diagnose and repair faulty cables. IT Support: Ensuring that cables are correctly wired during computer or equipment setup. Durable Construction: The tester is built with durability in mind, designed to withstand the wear and tear of regular use in professional environments. The small yet sturdy casing protects the internal components from damage during transport or in rugged conditions. Applications: Network Testing: Ideal for verifying the functionality of LAN cables before installation or during troubleshooting. Installation: Useful for testing and certifying new Ethernet cables during network setup or maintenance. Field Use: A compact, portable solution for IT professionals, allowing them to test cables in various settings, such as data centers, offices, or homes. Cable Diagnostics: Quickly diagnosing issues with existing cables, such as miswiring, shorts, or open circuits, saving time in repairs. Summary: The Proskit MT-7031 Mini LAN Cable Tester is a compact, reliable, and easy-to-use tool designed to test Ethernet cables for correct wiring and functionality. With LED indicators for each wire, the ability to detect short and open circuits, and simple operation, it’s an essential tool for professionals who need to verify LAN cable integrity. Its portable design makes it an excellent choice for technicians working in the field or on-site installations, ensuring that Ethernet cables are properly configured for optimal network performance.

The Proskit MT-3209 3-5/6 AC/DC Digital Clamp Meter is an advanced, high-precision tool designed for measuring both AC and DC electrical parameters, offering versatility and reliability in a range of electrical testing and troubleshooting applications. Below is a detailed description of the features and specifications of the MT-3209. Key Features: Wide Measuring Range: The Proskit MT-3209 offers a 3-5/6 digit display, which means it can display up to 5999 counts. This high level of precision allows for accurate measurements across a wide range of values, making it suitable for both low and high current measurements. AC/DC Current Measurement: The meter can measure AC (Alternating Current) and DC (Direct Current) currents with a wide range, typically from a few milliamps (mA) to several hundred amps (A). This feature is especially useful for professionals working in a variety of environments, from residential wiring to industrial electrical systems. AC/DC Voltage Measurement: It can measure both AC and DC voltages across a range of circuits, including household electrical systems, appliances, and industrial equipment. The ability to measure both types of voltages makes this meter a versatile tool for troubleshooting electrical circuits. Resistance Measurement: The MT-3209 also measures resistance in circuits, with a broad range that allows users to test for continuity, resistance in wires, and check the integrity of electrical components. True RMS Measurement: The True RMS (Root Mean Square) measurement capability allows for accurate readings of non-sinusoidal waveforms, which are commonly found in modern electrical devices and complex industrial machinery. This feature ensures the meter provides precise readings, even when the current or voltage waveform is distorted. Continuity Testing: The continuity function checks for an open circuit or a break in the circuit, emitting an audible beep when continuity is present. This is useful for quickly diagnosing faults in wires and circuits. Data Hold Function: The Data Hold function freezes the displayed value, making it easier to record measurements or inspect them more closely without needing to keep the meter in place. Large LCD Display with Backlight: The meter is equipped with a large LCD display that provides clear and easy-to-read results. The backlight feature allows users to work in low-light conditions, ensuring visibility in dark or confined spaces. Auto Range Function: The auto-range function automatically adjusts the meter’s range based on the measurement, making it easy to use by eliminating the need for manual range selection. This simplifies the process and ensures that the correct range is used for accurate readings. Jaw Size and Clamp Design: The clamp jaw has a large opening, which can measure current in larger conductors without the need to disconnect them. This feature allows users to measure current without interrupting the circuit, making it convenient and time-saving for electrical diagnostics. Overload Protection: The MT-3209 is designed with overload protection, ensuring the safety of the device and user in the event of measuring currents or voltages beyond the meter's rated capacity. Built-in Temperature Measurement (Optional): In some models or with certain accessories, the MT-3209 may also include the ability to measure temperature. This adds another layer of functionality, allowing users to monitor the temperature of electrical components, which is useful in assessing the condition of circuits, equipment, and machinery. Battery-Powered: The meter operates on standard battery power, providing portability and ease of use in various settings, such as the field, workshops, and remote locations. Applications: Electrical Installation and Maintenance: Ideal for electricians and maintenance personnel for measuring and troubleshooting electrical systems in residential, commercial, and industrial environments. Automotive and HVAC Systems: Useful for diagnosing electrical issues in vehicles or HVAC systems, including current draw, voltage levels, and resistance of components. Power Distribution Systems: Essential for monitoring and testing circuits and power systems in industrial facilities. Energy Audits: Great for energy audits where current and voltage measurements are needed to assess the efficiency of electrical systems. Home Appliances: Used for testing the operation and safety of home appliances and electronics. Safety Features: CAT III 600V Rating: The Proskit MT-3209 is rated for CAT III 600V, meaning it is safe to use on equipment that operates at voltages up to 600V, including residential and industrial electrical systems. Double Insulation: Ensures added safety when working with electrical circuits, providing protection against accidental shocks. Summary: The Proskit MT-3209 3-5/6 AC/DC Digital Clamp Meter is a versatile and highly accurate tool that is perfect for measuring current, voltage, resistance, and other electrical parameters. Its True RMS capabilities, wide measurement range, and large display make it suitable for both simple and complex electrical tasks. The inclusion of features like data hold, backlight display, overload protection, and auto-ranging makes this clamp meter a reliable and essential tool for professionals working in a variety of industries.

The Proskit MT-309 Smart Non-Contact Voltage Tester is a versatile and user-friendly electrical tool designed to safely detect the presence of AC voltage in wires, outlets, and electrical equipment without making physical contact. Here’s a detailed description of the key features and specifications: Key Features: Non-Contact Voltage Detection: The tester is equipped with advanced technology to sense AC voltage from a distance. Simply bring the device close to the live wire, and it will alert you if there’s voltage present, without the need for direct contact with the electrical circuit. Voltage Range: Typically, the tester detects a wide range of AC voltages, often from 90V to 1000V, making it suitable for use in residential, commercial, and industrial environments. LED and Audible Indicators: The device features both visual (LED lights) and audible (buzzer) indicators. The LED lights will flash to show the presence of voltage, while a loud beep or tone increases in intensity when the voltage level is higher, providing a clear, immediate indication. Smart Detection: The "smart" functionality helps identify the proximity to the voltage source. It may feature a sensitivity adjustment for different voltage levels, enhancing safety by accurately detecting power in complex or tricky environments. Pen-Style Design: The tester is designed in a pen-like shape, making it easy to handle and maneuver in tight spaces. The ergonomic design allows for comfortable use during extended periods. Safety and Reliability: The device is typically insulated to ensure user safety when detecting live wires. The MT-309 is also built to meet high safety standards, such as being resistant to electrical surges and potential electrical hazards. LED Flashlight: Many models come with an integrated LED flashlight at the tip, which is useful for illuminating dark spaces while conducting voltage tests. Auto Power-Off: The tester may include an auto power-off feature that helps conserve battery life by turning off automatically after a period of inactivity. Battery-Powered: Powered by a standard battery (commonly a 9V battery), ensuring portability and convenience for on-the-go testing without the need for external power sources. Durability: The MT-309 is designed to withstand everyday wear and tear in tough working environments, with a durable plastic casing that resists impact and damage. Applications: Residential Wiring: Detects voltage in home outlets, wires, and appliances. Industrial and Commercial Electrical Work: Ideal for electricians and maintenance workers who need to test electrical systems in various work environments. DIY Projects: Useful for hobbyists and DIY enthusiasts working with home electrical projects. Safety Guidelines: Always test the voltage tester on a known live circuit before using it on unknown circuits. Ensure the device is working properly by checking it on a live electrical source. Always exercise caution when working with electricity, even when using non-contact testers. In summary, the Proskit MT-309 Smart Non-Contact Voltage Tester is a reliable and easy-to-use tool designed to help electricians, technicians, and DIY enthusiasts detect live wires and ensure electrical safety efficiently.

The Proskit PK-1938M1 Professional Telecom & Networking Tool Kit is a comprehensive and versatile toolkit designed for professionals working in the fields of telecommunications, networking, and IT services. It includes a wide range of high-quality tools for installation, maintenance, and troubleshooting of telecom and networking systems, making it an ideal solution for professionals who need reliable, durable tools for both simple and complex tasks. Key Features: Complete Telecom & Networking Tool Set: The Proskit PK-1938M1 includes all the essential tools for telecommunications and networking, such as tools for crimping, cutting, stripping, testing, and punching down wires, among others. It’s specifically designed for working with network cables, telephone wires, fiber optic cables, and other telecom systems. High-Quality Crimping Tools: The kit includes professional-grade crimping tools that are essential for RJ-45 and RJ-11 connectors used in network and telecom cables. The crimping tools ensure secure and durable connections, which are vital for high-performance telecom and networking setups. The crimping tools are designed for precision and strength, ensuring that every connection is solid and free from issues. Cable Stripping and Cutting Tools: Cable Strippers: The kit includes insulated wire strippers that make it easy to strip the insulation from telecom or network cables without damaging the wires inside. They help prepare cables for crimping or other connections. Cable Cutter: A high-quality cable cutter is included for cutting cables to the required lengths, offering clean and precise cuts for various types of cables. Punch-Down Tool: The Proskit PK-1938M1 comes with a punch-down tool, which is essential for installing telephone and networking jacks (such as Keystone jacks or patch panels). The punch-down tool allows you to insert and secure wires into the punch-down blocks or connectors, ensuring stable connections for telecom and network systems. Network Cable Tester: The kit includes a network cable tester that is crucial for testing the integrity of network cables. It allows you to check whether Ethernet cables (such as CAT5, CAT6) are properly wired and functioning. The tester can detect common problems like miswiring, open circuits, and short circuits, which can help ensure the quality and reliability of your network connections. Ergonomic and Durable Tools: The tools in this kit are ergonomically designed for comfort and ease of use. They feature soft, non-slip handles for secure grip, which is especially important when working with cables for extended periods. The build quality of the tools is robust, made from high-strength materials to withstand frequent use, making the tools long-lasting and durable in demanding environments. Comprehensive Tool Set: The Proskit PK-1938M1 includes a wide variety of tools to cater to various tasks, such as stripping insulation, crimping connectors, cutting cables, testing cables, and making network connections. The comprehensive range of tools makes it suitable for telecom installations, network setups, troubleshooting, and maintenance in both professional and DIY contexts. Compact and Organized Storage: The Proskit PK-1938M1 comes with a compact, durable carrying case designed for easy storage and portability. The case helps keep all the tools organized, ensuring that you can quickly access what you need while on the job. The case also keeps tools protected and ensures that they stay in good condition during transport. Versatile Applications: This tool kit is designed for professionals who work in various networking and telecom environments. It is suitable for: Telecom cable installations (telephone lines, fiber optic cables, and more). Network installations (setting up local area networks (LANs), Ethernet connections, etc.). Cable testing and troubleshooting (identifying faults or miswiring in telecom or network cables). DIY networking projects (home network setups, telephone system maintenance). Included Components: The Proskit PK-1938M1 Professional Telecom & Networking Tool Kit typically includes the following: Crimping Tool: For crimping RJ-45 and RJ-11 connectors onto cables. Cable Strippers: For stripping the insulation from network and telecom cables without damaging the inner wires. Cable Cutter: For cutting cables to the required length. Punch-Down Tool: For installing cables into connectors, such as Keystone jacks or patch panels. Network Cable Tester: To test the integrity of network cables and ensure proper connections. Tweezers: For precision handling of small components. Small Flathead and Phillips Screwdrivers: For general telecom and networking tasks that require screws. Cable Ties: For organizing cables and keeping them neat. Modular Connectors: Includes RJ-45 and RJ-11 connectors for network and telephone cables. Compact Carrying Case: To store all the tools neatly and transport them conveniently. Applications: Telecommunications: Ideal for professionals involved in the installation and maintenance of telephone systems, fiber optic cables, and other telecom-related work. Networking: Suitable for setting up and maintaining Ethernet networks (LANs), including cabling, installation of patch panels, connectors, and testing of cables. Troubleshooting: Perfect for diagnosing issues with network connections, ensuring proper wiring, and resolving connectivity problems. Home and Office Networks: Suitable for DIY network setups and maintenance of home or office network systems. Fiber Optic Cable Work: Works well for those handling fiber optic cables with the right precision tools for both stripping and installation. Advantages: Complete Tool Set: The kit includes all essential tools for telecom and networking, ensuring you are equipped for a variety of tasks. Professional Quality: The tools are built to high standards, ensuring durability and reliability for long-term use. Easy to Use: The tools are designed for ergonomics and comfort, making them simple to use, even for extended periods. Compact and Organized: The included carrying case keeps everything organized, making it easy to transport and access the tools. Cost-Effective: Offers great value for money, providing a full set of professional-grade tools at an affordable price for telecom and networking professionals. Conclusion: The Proskit PK-1938M1 Professional Telecom & Networking Tool Kit is an all-in-one solution for telecom professionals, network technicians, and DIY enthusiasts who require a set of high-quality tools for network installation, maintenance, and troubleshooting. With crimping tools, cable testers, punch-down tools, and cable cutters, this kit provides everything needed to ensure successful and efficient networking and telecom tasks. The ergonomic design, professional-grade quality, and compact storage make it an ideal toolset for both everyday use and complex installations. Whether you're working with Ethernet, telephone, or fiber optic cables, the Proskit PK-1938M1 toolkit is a reliable and cost-effective choice.

The Proskit PK-2633, Network Test Tool Kit is a comprehensive toolset designed for network technicians, IT professionals, and DIY enthusiasts involved in setting up, maintaining, and troubleshooting network systems. This versatile kit includes essential tools for network installation, cabling, and troubleshooting, making it a great solution for working with local area networks (LANs), network cables, and connectors. Key Features: Complete Network Testing Solution: The Proskit PK-2633 kit includes tools to test and troubleshoot network cables, including Ethernet cables (CAT5, CAT5e, CAT6), telephone cables, and coaxial cables. This kit allows for quick diagnostics of common network issues, such as signal loss, miswiring, or poor connections. Network Cable Testing: Cable Tester: The kit includes a network cable tester that allows you to check the wiring and connectivity of Ethernet cables, coaxial cables, and telephone cables. It helps detect wiring faults, such as miswiring, open circuits, or short circuits, ensuring that cables are working properly before installation. The tester can display the status of each wire in a network cable, making it easy to troubleshoot any potential issues and ensure proper connection. Comprehensive Set of Tools: The kit includes essential crimping tools, cable strippers, and cutters for making and fixing network cables. Crimping Tool: This tool is used for crimping connectors (RJ-45, RJ-11) onto network cables, allowing you to make customized cable lengths for your network. Cable Strippers: For stripping insulation from Ethernet cables or telephone wires to prepare them for crimping or testing. High-Quality Construction: All tools in the Proskit PK-2633 kit are made from durable materials, ensuring they can withstand the wear and tear of regular use. The crimping tool is designed for precision and strength, ensuring that your network cables are securely connected and providing reliable performance. Ergonomic and User-Friendly: The tools in this kit feature ergonomic handles designed for comfort and easy use, reducing hand fatigue during extended work sessions. The non-slip grips ensure a secure and comfortable handling, even in demanding conditions. The cable tester is straightforward and simple to use, with clear indicators for quick results. Portable and Organized Storage: The Proskit PK-2633 comes with a compact, organized carrying case that holds all the tools in place and allows for easy transport and storage. The case is designed to keep tools securely in place, ensuring they stay organized and accessible during network setup or troubleshooting tasks. Versatile Applications: The kit is perfect for a variety of networking tasks, including: Testing network cables for proper connectivity and identifying faults. Making custom-length cables by cutting, stripping, and crimping Ethernet or telephone cables. Troubleshooting existing network systems to identify wiring issues and faulty connections. Setting up home or office networks by making sure all cables are correctly wired and functional. Maintaining and repairing network infrastructure. Cost-Effective Solution: The Proskit PK-2633 kit offers a complete set of essential tools at an affordable price, making it a cost-effective option for network professionals and hobbyists alike. With all the necessary tools for network cable maintenance, testing, and installation, this kit offers great value for its price. Included Components: The Proskit PK-2633 Network Test Tool Kit typically includes: Network Cable Tester: For testing the wiring and connectivity of network cables, including Ethernet, coaxial, and telephone cables. Crimping Tool: For crimping RJ-45, RJ-11, and other connectors onto network cables. Cable Strippers: For stripping insulation from cables before making connections. Cable Cutter: For cutting cables to custom lengths. Modular Connectors: A variety of RJ-45 and RJ-11 connectors for use with network cables. Test Leads: For testing the cables with the network tester. Compact Carrying Case: A portable and organized case for storing and transporting all the tools. Applications: Network Cable Installation: Perfect for setting up and connecting Ethernet networks, including both home and office installations. Cable Troubleshooting: Ideal for diagnosing and repairing faulty Ethernet, telephone, or coaxial cables in existing network setups. Making Custom Cables: Enables you to cut, strip, and crimp cables to specific lengths for use in a wide range of network setups and repairs. IT Support and Maintenance: Used by network professionals to ensure that cables are working correctly and to fix any issues that arise during network maintenance or expansion. Home Networking: Great for DIY enthusiasts or homeowners who want to set up or troubleshoot their home network. Advantages: Comprehensive Network Testing: The inclusion of a network cable tester ensures that you can quickly and accurately diagnose issues with network connections. High-Quality and Durable Tools: The tools in this kit are designed to be durable and reliable, making them suitable for frequent use. User-Friendly Design: The ergonomically designed handles and easy-to-read tester make the kit suitable for both professionals and beginners. Portable and Organized: The compact carrying case makes it easy to transport the tools to job sites or store them safely when not in use. Cost-Effective: Offers a complete set of tools for network testing and installation at a reasonable price, making it accessible for both professionals and hobbyists. Conclusion: The Proskit PK-2633 Network Test Tool Kit is an excellent choice for network technicians, IT professionals, and DIY enthusiasts who need a reliable, affordable, and well-organized toolkit for network cable installation, maintenance, and troubleshooting. With its comprehensive selection of testing, crimping, stripping, and cutting tools, it provides everything needed to set up or repair Ethernet, coaxial, and telephone networks. The high-quality construction, ergonomic design, and compact storage options make this kit a practical and efficient solution for network-related tasks. Whether you're setting up a new network or maintaining an existing one, the Proskit PK-2633 toolkit offers great value and reliability.

The Proskit PK-4046BM, Professional Electrician Repair Tool Set (220V) is a complete and highly practical toolset designed for professionals in the electrical field. This comprehensive kit provides a selection of high-quality tools that are essential for electrical repair, maintenance, and installation tasks. With a focus on reliability, ergonomics, and safety, this toolset is ideal for electricians, technicians, and DIY enthusiasts working with electrical systems, wiring, and components. Key Features: Complete Set of Electrical Tools: The Proskit PK-4046BM includes all the essential tools needed by electricians for a variety of electrical tasks, such as wire cutting, insulation stripping, crimping, soldering, and more. This set is designed for tasks that involve working with electrical circuits, cables, connectors, switches, and electrical panels, making it versatile for both residential and commercial work. 220V Power Compatibility: The kit is designed to be compatible with 220V power sources, which is suitable for regions where 220V electricity is used. This ensures that electrical tools such as 220V soldering irons or power testers included in the kit can be safely used. Durable and High-Quality Tools: The tools in the kit are made from high-quality steel, insulated materials, and other durable components to ensure long-lasting performance even under demanding conditions. Each tool is built for precision and reliability, ensuring that the tools can withstand frequent use on electrical jobs. Insulated Handles for Safety: Tools such as pliers, cutters, and screwdrivers feature insulated handles that provide protection against electrical shocks. This is a critical safety feature when working with live wires or electrical components. The insulation helps to prevent accidental electrical contact and reduces the risk of injury, making the tools safer to use in high-voltage environments. Ergonomic Design: The Proskit PK-4046BM kit is designed with ergonomic handles for a comfortable grip, reducing hand fatigue during prolonged work. This is especially beneficial for electricians who perform repetitive tasks or need to use their tools for extended periods. The handles are non-slip, ensuring a firm and secure grip, even in challenging conditions such as wet or oily environments. Versatile Applications: This toolkit is versatile and suitable for a variety of tasks, including: Electrical repairs: Fixing wires, connectors, outlets, and switches. Wiring installations: Installing electrical systems, outlets, and fixtures. Electrical troubleshooting: Diagnosing electrical problems and making repairs on systems. Home and commercial projects: Ideal for electricians working in both residential and commercial environments. DIY electrical tasks: Perfect for DIY enthusiasts who need professional-grade tools for electrical projects. Compact and Organized Storage: The Proskit PK-4046BM comes in a compact tool case designed for easy storage and portability. The case helps to keep the tools organized, ensuring quick access when you need them on the job. The case is lightweight, yet sturdy, making it easy to carry around to different job sites or store in a workshop. Electrical Testing Tools: The kit includes tools such as voltage testers and multimeters, which are essential for testing and diagnosing electrical circuits. These tools allow you to safely measure voltage, resistance, and continuity in various electrical systems. Included Components: The Proskit PK-4046BM Professional Electrician Repair Tool Set typically includes the following tools: Insulated Pliers: For cutting, gripping, and bending wires. Wire Cutters: To cut through various types of electrical wires and cables. Wire Strippers: For stripping insulation from wires without damaging the conductors. Screwdrivers: Precision screwdrivers for fastening or loosening screws in electrical components. Voltage Testers: To safely check the voltage of electrical circuits. Multimeter: To measure electrical values such as voltage, current, and resistance. Crimping Tool: For crimping connectors onto wires and cables. Soldering Iron (220V): For soldering electronic components or wires, included for electrical repairs that require a reliable and efficient soldering tool. Soldering Iron Stand: To safely hold the soldering iron when not in use. Utility Knife: For cutting through insulation and other materials. Insulated Tape: For electrical insulation and securing cables or wires. Cleaning Brushes: For cleaning components and removing dust or debris from electrical parts. Tool Case: A compact, durable, and organized carrying case to store all the tools safely and conveniently. Applications: Residential Electrical Work: Ideal for electricians working on homes, wiring outlets, switches, and other household electrical installations and repairs. Commercial Electrical Jobs: Suitable for electricians working in commercial and industrial settings, including repairing lighting systems, circuits, and wiring installations. Electrical Diagnostics: Useful for troubleshooting electrical circuits, checking for shorts, open circuits, or verifying proper voltage and current flow. DIY Electrical Projects: Perfect for DIY enthusiasts working on home improvement or small-scale electrical projects such as installing light fixtures or repairing electrical components. Maintenance and Upgrades: Ideal for routine maintenance of electrical systems and equipment or upgrading electrical components in both homes and businesses. Advantages: Complete and Reliable Tool Set: The Proskit PK-4046BM offers a comprehensive range of tools, making it an all-in-one solution for most electrical tasks. Insulation for Safety: The insulated handles provide added safety when working with electrical systems, reducing the risk of electrical shock. Durable Tools: The high-quality construction ensures the tools are long-lasting, even under heavy use in electrical work. Ergonomic Handles: The tools' ergonomic design ensures comfortable use and minimizes hand strain. Compact Storage: The organized tool case allows for easy transport and storage, keeping the tools safe and ready for use. Multifunctional: Suitable for a variety of tasks, including electrical repairs, installations, diagnostics, and general electrical maintenance. Conclusion: The Proskit PK-4046BM, Professional Electrician Repair Tool Set (220V) is a high-quality and versatile toolkit designed for professional electricians and DIY enthusiasts who need reliable tools for electrical maintenance, repairs, and installations. With a selection of insulated tools, ergonomic designs, and safety features, this kit ensures both performance and safety during electrical work. The inclusion of essential electrical testing tools, a soldering iron, and a well-organized case makes it a comprehensive and efficient solution for any electrician's toolkit. Whether you're working on residential or commercial electrical projects, the Proskit PK-4046BM tool set provides all the essential tools for the job.