Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size

As installation spaces become increasingly confined, it remains necessary that tools enable users to work successfully. Narrow spaces require additional placement points of the tool, to allow screws to be accessed and actuated. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be “taken” every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With Take it easy tool finder: colour coding by size. The Joker pouches are suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end “takes” the screw every 15° Slim ring side with 15° crank Suitable for docking with the Wera 2go system For very tight spaces The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be “accessed” every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Joker 6003: For return angles of less than 30° Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. Double-hex geometry The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. Joker 6003: Tilted ring side The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). Suitable for docking with the Wera 2go system The Joker pouches are suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back. Set contents: 05020231001 6003 Joker Combination wrench 05020200001 1x 8 x 115 mm 05020201001 1x 10 x 125 mm 05020202001 1x 11 x 135 mm 05020203001 1x 12 x 148 mm 05020204001 1x 13 x 160 mm 05020205001 1x 14 x 167 mm 05020206001 1x 15 x 174 mm 05020207001 1x 16 x 182 mm 05020208001 1x 17 x 190 mm 05020209001 1x 18 x 210 mm 05020210001 1x 19 x 230 mm Hook and Loop Fastener Strip 240 1x 50x240 mm

16-piece wrench set for bicycle applications with torque control including Wera Clique-Torque wrench A 5 (2.5-25 Nm) Sockets and bit sockets for the most popular screw profiles on road bikes, mountain bikes and e-bikes Easy setting and saving of the desired torque value with audible and tactile click when the scale value is reached (click 1) Safely quantified force: when the set value is reached, the torque wrench triggers audibly and noticeably (click 2) Precise to ± 4% as per DIN EN ISO 6789-1:2017-07. The 16-piece set from the screwdriving tool specialist Wera solves the most important screwdriving problems associated with bicycles, with reliable control of applied torque to protect sensitive components. With a click-torque wrench in the unmistakable Wera design.Very robust design with high accuracy as per DIN EN ISO 6789-1: 2017-07. Easy setting and saving of the default values. The audible and tactile snapping on reaching the scale values also facilitates the safe setting of the desired torque values. The robust release mechanism guarantees a clearly audible and tactile trigger signal when the set torque is reached. For clockwise torque-control and with a reversible 45-tooth ratchet. The torque wrench is extremely space-saving and supplemented with accessories that are suitable for the torque range and adapted to the most common screwed connections on bicycles; in a robust, surface-friendly textile box. Included are: Click Torque A 5, 1/4“, 2.5 - 25 Nm, 4 sockets with 1/4” drive, 7 Hex Plus hexagon bit sockets and 4 TORX® bit sockets. Sockets and bit sockets with “Take it easy” tool finder with colour coding by size - for easy and quick location of the required tool. Bit sockets with holding function for extra comfortable screwdriving without the screw falling off the tool. Incredibly compact arrangement for a lot of tools in a small space. Textile box with very high robustness and longevity. Additional surface protection through the textile outer material. Low weight and volume for easier mobility. Bit sockets with all the benefits of Wera bit technology such as fitting accuracy, wear resistance and concentric run-out properties Set contents: Click-Torque A 5: 05075604001 1 x 1/4" x 2.5-25 Nm 8767 A: 05003390001 1 x TX 10 x 28 mm 05003391001 1 x TX 20 x 28 mm 05003392001 1 x TX 25 x 28 mm 05003393001 1 x TX 30 x 28 mm K240: 1 x 50 x 240 mm 8790 HMA: 05003509001 1 x 10 x 23 mm 05003512001 1 x 13 x 23 mm 05003513001 1 x 14 x 23 mm 05003499001 1 x 15 x 23 mm 8740 A HF: 05003332001 1 x 3 x 28 mm 05003333001 1 x 4 x 28 mm 05003335001 1 x 5 x 28 mm 05003336001 1 x 5 x 100 mm 05003337001 1 x 6 x 28 mm 05003338001 1 x 6 x 100 mm 05003339001 1 x 8 x 28 mm

Premium bits for TORX BO socket screws. TORX® BO screws have a protruding pin in their drive profile. This prevents unauthorized loosening, as these screws cannot be operated with “normal” TORX tools. Only special TORX BO tools have a bore which can mount the pin. Tough, for universal use. 1/4“ hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For recessed TORX screws with securing pin TORX® bit with bore hole on the output side Tough for hard materials TORX with borehole (BO) TORX tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that ”normal“ TORX tools cannot be used. This pin fits into the borehole of TORX BO tools allowing safety screws to be unfastened. Tough bits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. Tip Size Blade Length Blade Length Blade diameter Code mm inch mm 05060050001 TX 10 89 3 1/2” 4.0 05060051001 TX 15 89 3 1/2“ 4.0 05060052001 TX 20 89 3 1/2” 4.5 05060053001 TX 25 89 3 1/2“ 6.0 05060054001 TX 30 89 3 1/2” 6.0 05060056001 TX 40 89 3 1/2"

ESD-safe Micro screwdriver. Dependable protection against electrostatic energy and associated damage. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. “Take it easy” tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Kraftform Micro screwdriver for hexagon head screws ESD-safe tool thanks to surface resistance of ≤ 109 Ohm Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Kraftform Micro handle with swivel cap for rapid twisting “Take it easy” tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Code mm mm mm inch 05030414001 3.0 60 97 5.7 2 3/8“ 05030415001 3.2 60 97 5.7 2 3/8”

Overview Bit holder with Rapidaptor quick-release chuck for bits with 1/4“ hexagon drive Multi-component Kraftform handle for fast and ergonomic screwdriving Hexagonal anti-roll feature against rolling away Rapidaptor technology for rapid change of the bits or blades Retractable bayonet blade High quality bit holder. The telescopic bayonet blade, which can be lowered into the handle, together with the quick-release chuck allows fast manual work even in confined installation situations. The Rapidaptor quick-release chuck enables rapid bit change without needing any special tools. The strong permanent magnet holds the bits absolutely securely. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Suitable for bits with ¼” hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). The telescopic blade I When the unique telescopic blade is lowered into the handle, fast, easy screw-driving action is possible, even in the tightest spots! The telescopic blade II By pushing the clamping sleeve, the telescopic blade can be extended out of the handle and the compact tool becomes a full-sized screwdriver. The telescopic blade III If the clamping sleeve is pushed again the telescopic blade can be taken out of the handle, and be used as a machine bit adaptor. Rapid-in and self-lock The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Rapid-out Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Chuck-all The Rapidaptor quick-release chucks hold ¼“ DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. Rapid-spin The free-turning sleeve allows screw steadying at the start of the screwdriving process. This makes it easier to apply the tool to the screw and prevents slipping. It can also be used as a short extension for ¼” applications e.g. in combination with the Wera Zyklop Ratchets. Kraftform The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either.

The ultra compact and lightweight bike tools with two quadruple bits and three tyre levers. Four different screw profiles can be operated with just one bit. Significant weight savings of over 50 %. The enormous space savings make the Bicycle Set 15 perfect for mobile use. The operability of the large profiles is made possible by the spring compression of the small tips. The bit with a 1/4“ hexagon drive (Wera connection series 1) can also be used with e.g. bit ratchets and bitholding screwdrivers with Rapidaptor. The 9504 tyre lever has a 1/4” mounting for using a 1/4“ bit. When both 9504 tyre levers are stacked together, a 4-in-1 bit can be inserted and you get a screwdriving tool. The 9505 tyre lever serves as both valve ejector and bleeder valve. The levers and 4-in-1 bits can be clipped together, so that everything is compact and nothing will be lost. Innovative, extremely compact quadruple bit – only one bit for four different screw sizes Super space- saving solution, ideal for mobile use Compact, secure and very simple retainer in the wera tyre levers The hexagon mounting of the tyre lever allows a torque of up to 10 Nm Significant weight savings and better overview of the tools when on tour Innovative, extremely compact quadruple bit – only one bit for four different screw sizes Safely lever the tyres off of the rim With the glass fibre reinforce plastic tyre levers, the tyres can be safely levered of the rim without damaging the rim. Lift off of the rim with one tyre lever, hook into a spoke and pull off the tyre with the second tyre lever. The tow tyre levers can be clicked together and are therefore not lost individually. The 9504-tyre lever with bit mounting The 1/4” Hexagon mounting in the 9504-tyre lever can mount one ¼” bit, allowing for easy connections. The 9505 tyre jack The 9505 tyre lever can be used as a valve ejector for French valves (Sclaverand) and as a bleeder for car valves. The Wera 4-in-1 bits Four screw sizes can be operated with the 4-in-1 bits 9506 and 9507. The 4-in-1 bit 9506 for four sizes of hexagonal socket screws (3.0; 4.0; 5.0; 6.0), the 4-in-1 bit 9507 for three sizes of hexagonal socket screws (2.5; 5.0; 6.0) and one size of TORX® screws (TX 25). In order to use the larger profile, continuously press against the spring tension while screwdriving so that the smaller profile is countersunk and the larger profile can be used. Tyre jack plus bit = screwdriving tool When the tyre levers 9504 are stacked together, the 4-in-1 bits can be inserted in the 1/4” holder and you get a screwdriving tool.

Many tools in a minimum of space. The sorting according to drive and size allows rapid accessing of the bits. The Wera Mini ratchet: drop-forged, full-steel design. Fine-pitched mechanism with 60 teeth that allows a small return angle of only 6° for precise work. Simple left/right switchover. Ergonomically-designed ratchet head and lever. 1/4“ Mini ratchet and tough viscous bits Ideal for working in confined spaces Tough viscous bits for universal use Use of 1/4” sockets also possible with the Wera adaptor 870/1 In handy and robust Bit-Check Zyklop Mini Set contents: 8001 A 05073999001 1 x 1/4" x 87 mm 851/1 Z PH 05072070001 1 x PH 1 x 25 mm 05072072001 1 x PH 2 x 25 mm 855/1 Z PZ 05072080001 1 x PZ 1 x 25 mm 05072082001 1 x PZ 2 x 25 mm 867/1 TORX® 05066486001 1 x TX 15 x 25 mm 05066487001 1 x TX 20 x 25 mm 05066488001 1 x TX 25 x 25 mm 840/1 Z Hex-Plus 05056320001 1 x 4 x 25 mm 05056325001 1 x 5 x 25 mm

High quality l-key set for hexagonal socket screws in a practical clip fastener out of wear-resistant material, enabling secure storage of the l-keys as well as simple removal. L-keys with hex-plus profile: offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the Risk of destroying the screw Recess. The ball-end on the long Arm allows for reliable working even in difficult installation situations. The precise chrome-plated design ensures high corrosion protection. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the l-keys. Technical Details Brand ‎Wera Item Dimensions LxWxH ‎11.42 x 3.5 x 2.2 inches Item Weight ‎0.14 Kilograms Item Package Quantity ‎1 Head Style ‎Hex Finish Type ‎Chrome-plated Operation Mode ‎Mechanical Manufacturer ‎Wera Part Number ‎05022181001 Product Dimensions ‎11.42 x 3.5 x 2.2 inches Item model number ‎05022181001 Finish ‎Chrome-plated Voltage ‎28 Number Of Pieces ‎1 Measurement System ‎Metric Included Components ‎L-key-set