wera ratchet wrench

Article description High quality set of ratcheting combination wrenches by Wera: Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With Take it easy Tool Finder: colour coding according to size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. With Take it easy tool finder: colour coding by size With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. Joker Switch The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. Tilted ratchet end The ratchet end is tilted at 15° to the tool axis, making application of the tool in confined spaces much easier. Joker 6000 ring ratchet spanner The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Integrated limit-stop Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. Double-hex geometry The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. And the exchangeable, hardened metal gripping plate in the Joker's open end literally bites itself into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Fine tooth mechanism The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). Ratcheting combination wrenches set, 4 pieces : 6001 Joker Switch Ratcheting combination wrench, with switch lever 05020065001 1x 10 x 159 mm 05020068001 1x 13 x 179 mm 05020072001 1x 17 x 225 mm 05020074001 1x 19 x 246 mm

Article description Comprehensive and space-saving ratchet/screwdriver combination. Compact Zyklop ratchet with bit magazine for the pocket. Magnetic direct mounting for ¼“ hex drive bits and 3/8” sockets. Rapid tool change thanks to the non-locking mounting. As the head is lockable at 0°, 15° and 90°, the tool can be used as a ratchet and as a ratchet screwdriver. The fine toothing with 72 teeth allows for a low return angle of 5°. Wide range of applications thanks to 12 bits integrated in the handle. The robust ratchet mechanism allows for ample torque. Perfect combination of a Zyklop ratchet with a 12-piece screwdriver set. The 75 mm long universal holder for 1/4“ hex drive bits can be used as an extension. Including sockets in the commonest dimensions. In a textile box, which can be docked onto the Wera 2go system. 27-piece Zyklop Pocket set with bits, sockets, universal holder and extension Compact Zyklop ratchet with integrated bit magazine The magnetic direct mounting simultaneously turns the 3/8” ratchet into a bit ratchet screwdriver with 1/4“ bit mounting Freely pivoting ratchet head with 5 predefined locking positions Fine tooth reversible ratchet (72 teeth) for a low return angle of only 5° Captive and freely swivelling bit magazine for easy removal and secure storage of the bits Universal holder with stainless steel sleeve and strong permanent magnet, can be used as extension Space-saving and safe storage in a textile box, which can also be docked onto the Wera 2go system Compact Zyklop ratchet with integrated bit magazine Combination tool mounting The magnetic direct mounting is suitable for 3/8” sockets as well as ¼“ bits without the need for an adapter. With integrated bit magazine A captive, freely swivelling bit magazine for 12 bits (1/4”, 25 mm length) is integrated in the handle of the compact Zyklop ratchet. Swivelling bit magazine The swivelling bit magazine allows for the bits to be removed easily in almost any situation and cannot be lost. The bits are safely stored. Freely pivoting ratchet head The ratchet head pivots freely and can be locked into any defined position by using the slide switch that is positioned on either side. It is even possible to work in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking at 0°, 15° and 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. Locking the ratchet head Thanks to the sliding switch on both sides, the ratchet head can be locked at the pre-defined positions 0° as well as 15° and 90° to the right and left. Small return angle The fine toothing with 72 teeth allows for a low return angle of only 5° for working in constricted screwdriving situations. Simple direction change The Zyklop Pocket ratchet can be quickly and easily reversed for clockwise/anti-clockwise rotation in any position using the knurl. Set Contents : 05004284001 8009 Zyklop Pocket 1x 3/8“x1/4”x133 mm 8794 SB Zyklop extension with free-turning sleeve, short, 3/8“ 05003582001 1x 3/8” x 125 mm 893/1/1 Universal Bit Holder 1x 1/4“x75 mm 8790 HMB Zyklop 3/8” socket 05003551001 1x 6 x 29 mm 05003552001 1x 7 x 29 mm 05003553001 1x 8 x 29 mm 05003554001 1x 9 x 29 mm 05003555001 1x 10 x 29 mm 05003556001 1x 11 x 29 mm 05003557001 1x 12 x 29 mm 05003558001 1x 13 x 29 mm 05003559001 1x 14 x 29 mm 05003560001 1x 15 x 29 mm 05003561001 1x 16 x 30 mm 05003562001 1x 17 x 30 mm 851/1 BTZ bits 05056420001 1x PH 1 x 25 mm 05056422001 1x PH 2 x 25 mm 855/1 BTZ bits 05056720001 1x PZ 1 x 25 mm 05056722001 1x PZ 2 x 25 mm 867/1 BTZ TORX® bits 05066120001 1x TX 10 x 25 mm 05066122001 1x TX 15 x 25 mm 05066124001 1x TX 20 x 25 mm 05066126001 1x TX 25 x 25 mm 840/1 BTZ bits 05056683001 1x 3 x 25 mm 05056685001 1x 5 x 25 mm 05056687001 1x 6 x 25 mm 05056684001 1x 4 x 25 mm Hook and Loop Fastener Strip 120

As installation spaces become increasingly confined, it remains necessary that tools enable users to work successfully. Narrow spaces require additional placement points of the tool, to allow screws to be accessed and actuated. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be “taken” every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With Take it easy tool finder: colour coding by size. The Joker pouches are suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end “takes” the screw every 15° Slim ring side with 15° crank Suitable for docking with the Wera 2go system For very tight spaces The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be “accessed” every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Joker 6003: For return angles of less than 30° Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. Double-hex geometry The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. Joker 6003: Tilted ring side The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). Suitable for docking with the Wera 2go system The Joker pouches are suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back. Set contents: 05020231001 6003 Joker Combination wrench 05020200001 1x 8 x 115 mm 05020201001 1x 10 x 125 mm 05020202001 1x 11 x 135 mm 05020203001 1x 12 x 148 mm 05020204001 1x 13 x 160 mm 05020205001 1x 14 x 167 mm 05020206001 1x 15 x 174 mm 05020207001 1x 16 x 182 mm 05020208001 1x 17 x 190 mm 05020209001 1x 18 x 210 mm 05020210001 1x 19 x 230 mm Hook and Loop Fastener Strip 240 1x 50x240 mm